How to delete tabs not 'open'

on FF 27 a small gray x appears on each tab and this can be used to delete the tab even when it is not 'open' (when another tab is open in the window)
it seems that on FF 29 the delete tab 'x' now appears only on the open tab - this means when you have a lot of tabs you want to delete (not all in that window) you have to open each tab and then delete it :-(
am i missing something? is there a way to delete tabs that aren't open or config the ubiquitous 'x' back onto all tabs?

well the-edmeister wins the prize (middle click it is), but :-) ..... i have a mac w/ magic mouse (and no 'middle click') :-(
so, while there are other apps/tricks to have 'middle click', I used this as a reason to download and use MagicPrefs, to get this preference-able function (and so many more)
[it does seem this is a slight variation in behavior across versions - FF29 will show the delete x on all tabs, it there are a limited number of tabs, but while my FF27 maintains the visible 'x's with my normal 'many' tabs, it seems FF29 has different behavior
and yes i have a tab addiction (right now 5 windows with 4,16,19,18,29 tabs)

Similar Messages

  • HT5731 My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    Your iPad is physically out of storage space. Purchasing space in iCloud dosen't magically give your actual iPad more physical  storage space.
    You need to delete content off of your iPad.
    https://discussions.apple.com/thread/5122738?start=0&tstart=0
    http://m.youtube.com/watch?v=mZdBQoE37FA&desktop_uri=%2Fwatch%3Fv%3DmZdBQoE37FA

  • Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one.  Thank you.

    Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one.  Thank you.

    iTunes Match is a subscription system that allows you to upload your own music (e.g. coped from CDs) to the cloud so that it shows (in the cloud) on your devices and computers without having to sync/copy it.
    Automatic downloads allows to, for example, buy an app on your computer's iTunes and have it automatically download on your phone without having to connect and sync it or go to the Purchased tab in the App Store app on your download and download it yourself - but doing that, going to the Purchased tab and redownloading an app, should get it associated.
    But no, I'm not aware of any problems that not having it associated causes.

  • How to delete photos not in camera roll?

    How to delete photos not in camera roll?

    The only way to delete photos NOT in the camera roll is to sync the phone with those photos deselcted.
    @iLikeCheesyStuff:  The photo stream photos are in the camera roll  as well.  The OP is referring to photos synced to his phone, which can't be deleted directly on the phone.

  • Excise tab not open in MIGO

    Dear Experts,
    We have create new plant with reference to our existing plant, all testing done except MIGO.
    At the time MIGO excise tab not open in case of excisesable material, we have already update ch id, Cenvat determination & Vendor excise details in J1ID
    Please help
    Regards
    BK GAIKWAD

    Hi,
    Check "Duty different at GR" check box selected or not in MIGO Setting segment in Maintaining Excise Group setting in following path( if not just select the check box)
    SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
    Also check in above path the Excise Reg. is there in Excise Groups Segment.
    For your new plant check Excise Reg. number is assigned in following path in Maintaining Plant Settings
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Plant Settings
    Regards,
    Biju K

  • How to Delete exter.processed Open PRs

    Hi PP friends,
    Can u pl. tell me how to delete  PRs generated through externally process operation .Actually these are those PRs which have been either partially converted or not converted at all. But still in the system and now client wants to delete these PRs.
    Kindly suggest how to do it?
    Thanks in advance

    Hi LAXMIKANTH
    To find out PR from external processing operation, how about using t-cd ME5A ?
    since PR from external processing operation has PP order number, search PR with PP order number (double click PP order column and specicy not equal blank). Then you can find out PR with PP order.  (Off course if you us direct procurement this PR also may have PP oredr number). After that put its PR number in archiving program (archiving object MM_EBAN).
    Or just set deletion flag manually from ME52.
    Best Regards
    keiji

  • HOW TO SOLVE ITUNES NOT OPENING!!

    Go to Start> Control Panel > add/remove programs
    Uninstall (remove) All iPod, iTunes and Quicktime
    Do NOT restart the computer
    Go to Start> My Computer > (Local Disk C:) > Program Files
    From there Right-Click and Delete The iTunes and Quicktime Folders
    Then Open the iPod Folder and Right-Click and Delete The iPod Bin folder
    If it says it cannot delete due to an iPodservice.exe Alert > Hit CTRLALTDEL
    Click on the Processes Tab and Stop the iPod service by selecting the ipodservice.exe in the list and hitting end process
    then Continue to Right-Click and Delete the Bin Folder again
    Go to Your (C:) Drive again and Go into Documents and Settings
    Then from there go into Your user name or The administrators account
    in there you should see a folder called Local Settings
    (if you do not see it -- go to Tools at the top bar, then folder options, click on the View Tab, Check off the "Show Hidden Files and Folders" Hit apply, hit OK)
    in Local Settings you will see a TEMP folder
    right Click and Delete the TEMP Folder
    Restart Your Computer
    Go to apple.com/ipod/download for updater
    Install and Run
    Go to apple.com/quicktime/download/standalone.html for QT
    Install and Run
    Go to apple.com/iTunes for iTunes
    SAVE TO DESKTOP
    Run msconfig
    1. On the Start menu, click Run. A Run window (command prompt) appears.
    2. Type msconfig in the Open field and click OK. The System Configuration Utility opens.
    3. Click the General tab.
    4. Select the "Selective Startup" option.
    5. Deselect the "Load Startup Items" checkbox.
    6. Click the Startup tab.
    7. Select the "iTunesHelper" and "qttask" checkboxes in the list.
    8. Click the Services tab.
    9. Make sure that "Hide All Microsoft Services" is selected.
    10. Click Disable All.
    11. Select the iPodService checkbox in the list.
    12. Click OK.
    13. Click Restart.
    -you will get the System Config. Util. again and just say OK and then Choose to Continue without Restarting
    -installed itunes From Desktop
    -set back to normal startup
    Reverse the MSconfig process that is above
    -reboot
    Try opening itunes again

    I too have had the same problems after upgrading to iTunes6. I followed the above instructions but was unable to delete the iTunes and Quicktime folders. I recieved an error message say "Cannot delete QuickTimeLocalized.qtr: It is being used by another person or program. Close any programs that might be using the file and try again." when I tried to delete Quicktime. I recieved the same message for the iTunesLocalized.qtr file when I tried to delete iTunes. Any thoughts or ideas would be appreciated. Thanks.

  • How to delete tab-space in one go?

    Hello,
    On every paragraph on my layout, I have this unwanted tab-space.
    How do you remove tab-space in paragraphs (Marked as Red) in one press without affecting the other tab-space (Marked as Green)?
    I have an idea of using the Find feature but I don't know what the code for tab-space is.

    rapirap wrote:
    I used ^t then changed it to nothing but the 5 consecutive tab-spaces get changed too.
    You were in the wrong part of the find/change window. See the following screenshot:
    If you are in the Text portion of the window, ^t is the code to find any tab. If you replace that with nothing and click the Change All button, it will find every tab in your search area and replace it with nothing. You can't do what you want in one step that way.
    If you click on the GREP portion (as Ellis had suggested):
    …the ^t code won't work, because GREP is different from Text. In GREP, \t is the code for tabs, and the ^ before the \t tells it to look for only the tabs at the beginning of paragraphs. You could hit the Change All button and it will remove all of the tabs at the beginning of paragraphs, but not the 5 tabs in a row.
    That said, why do you want 5 tabs in a row? If you describe what you are trying to do, I'm sure there are much better ways to work. And you may also want to think about not using two spaces after a period. That's an old typewriter rule that hasn't been recommended since desktop publishing began many years ago.

  • How to stop tabs re-opening after firefox crashes.........when it crashes and I have multiple tabs open, when re-starting firefox all of the tabs re-open too. How can I stop this?

    Firefox crashes quite often, especially when I have multi tabs open. I usually have to use CTRL ALT DEL and end the process as Firefox stops responding.
    My problem is not the crashing........it is the re-opening of the multiple tabs I had open, when normally it is one of them (not the home page) that caused the crash in the first place, so I cannot re-open firefox until I restart the pc, because every time I do it is the same story. Firefox tries to re-open all of the tabs and stops responding. I have looked in options but nowhere does it allow me to stop multiple tabs opening after a crash. If this continues, I will have to uninstall Firefox and stick to Chrome.

    Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    *http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • TDMS4HCM: How to delete the not needed OM

    Hello,
    I have done in our test system the folllowing actions:
    1st I do the client copy with the profile SAP_UCSV to setup my receiver client for TDMS4HCM
    2nd I tansfer only one person from source to target for my test by using the ERP Initial Package for HCM  Personnel Administration (PA)
    Problem:
    The new client contains the whole organisation management (Germany and Benelux), that is due to the client copy.
    I want the client only with Benelux OM, not Germany.
    How can I do it? is there any methode to delete the Germany OM?
    Thanks all of you for your Helps.
    King regards
    Sandoz

    Hello suman,
    thanks you for your reply,
    I use the scenario, "ERP Initial Package for HCM Personnel Dev. PD & PA" . I selected the Benelux OM for transfer and do the following: I click on the buton "PD selection" and "PD delete and target Option", I select the option "Delete complete objects" and i check "Delete Target Area" but unfortunataly only the Benelux OM was deleted. Germany, netherland, center Europe are still in target system. Only the Data were seleted for the transfert are deleted in the target system.
    I think i do something wrong. Do you have any idea?
    thanks
    Sandoz

  • Ff6 upgrade with tabs not opening & Adobe Flash

    I have so many issues with this FF6 I don't know why you released this garbage before it was working not enough negative testing I would presume.. When I click to open a new tab only I get new windows instead & yes I have checked my options & they are correct so don't go there.. Next you tell me my Adobe Flash is outdated & I uninstalled it & tried to install the updated version which is showing only as 10.1 but FF feels it should be 10.6 a communication gap between Adobe & FF ??????? In any event FF is blocking the install of Adobe 10.1 "so now what": msg says "I'm missing a plug in" WOW what a surprise only thing I can't get a plug in WOW what a surprise.. This FF6 stinks.... Mozilla is getting like Microsoft & IE which who knows may be better now.. And no more real people either..

    Because it probably isn't.
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Why does a new tab not open when I click on it? I have just suffered from searchqu and successfully removed it (fingers crossed) but now I have this issue. Please help?

    Since I got infected with searchqu and (hopefully) removed this, when I try and click on the + to open a new tab, nothing happens. I have also tried clicking on file, scrolling to "New Tab" but again nothing happens. However, if I go to file then "New Window" then it will open a new window - but what a nightmare!!! Please can someone help?
    Regards
    Chelley
    x
    Solved it
    Than you very much for your help
    x

    Uninstall the '''''Ask Toolbar'''''. It can cause that problem.
    *http://support.mozilla.org/en-US/kb/Uninstalling+add-ons
    *http://support.mozilla.org/en-US/kb/Cannot%20uninstall%20an%20add-on
    *http://kb.mozillazine.org/Uninstalling_toolbars
    *Also see --> https://support.mozilla.org/en-US/questions/908952
    If that does not solve the problem:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Consider upgrading Firefox; you are using version 3.6.23, the current version is 3.6.25
    *See --> https://support.mozilla.com/en-US/kb/Updating+Firefox?bl=n&s=update%20automatically
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How to delete apps not being used on iPad Air?

    I Am new to this electronic world & seems maybe we downloaded many apps to see what it was not knowing it was permanent ;so now I try to access what I want to use & all I get is the blue circle turning endlessly .can I do anything to resolve this problem ? Most of these apps we will never use & would prefer to delete if possible . Bear in mind I've learned some but many things can still be difficult (age & handicapped) please

    You should be able to delete apps from your iPad that you've downloaded from the store. To do so press and hold any of the apps on your iPad’s homescreen and after a couple of seconds or so they should start to shake. Then press the 'x' on their top left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the apps shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'.
    You can also hide apps (you can't permanently delete items from your purchase history) via your computer's iTunes so that they then don't show in the Purchased tab in the App Store app for redownloading : iTunes Store: Hiding and unhiding purchases.

  • How to delete data from Open Hub DB table when the DTP is inactive..

    Hi Gurus,
    I am transporting some 2LIS extractors to QA with some enhancements.
    The data goes to an OHD ( third party ) pulled by a process outside SAP enabled by a BAPI.
    Now , By mistake , I imported the OHDs with still some old left in the DB table of OHD ( /bic/oh<>)
    It's not allowing to me do manual activation and also DTP is inactive ( cannot do a delta DTP and make no of records zero )
    I want to delete the data in the OHD DB tables ..any clues....
    Thanks,
    Chetan

    Hi Chetan,
    The OHD table name is usually /BIC/OH<OHD-name> .  You can find it in the OHD definition.
    Go to transaction se14, give the table name and say edit.
    Select Delete Data and say Activate and adjust database.
    This will delete the entire contents of the OHD DB table.
    Regards,
    Uma Maheswari

  • How to delete layers not used in any layer comp?

    I have a psd with multiple layers and multiple layer comps. Many of the layers are not used in any layer comp. I need to import this file into flash, but I don't want to import anything I don't need. So, I need to delete any layer (particularly text layers) that aren't used in any of the layer comps. I know I could go through and turn on each individual layer comp and manually delete, but the way this file is laid out, that could take years and cost millions of lives.
    Is there a more automated way to do this?

    You could export the layer comps to files and then re-import them to a fresh file.

Maybe you are looking for