How to delete the alarm "Certificate is near expiration" on multiple WAEs using WAAS CM

Hi,
We are getting "Certificate is near expiration" alarm on more than 200 WAEs . Instead of deleting the expired certificates manually from each device,
how to delete this alarms/certificates on all the devices from WAAS CM ?
Please advice..
Regards,
Ameen.

Ameen,
I believe there is script that you could use to address this issue on multiple devices at once.
Please open a TAC case so that TAC Engineer would assist with this.
For a single WAE, it is documented here.
https://supportforums.cisco.com/thread/2010020
Thanks
Anil

Similar Messages

How to delete the x509 certificate on WLC

Hi Forumers'
I had install third party CA cert and device cert into the WLC. I would like to ask is there any command can delete these certificate?
thanks

Yong,
I don't believe that you can 'delete' the certificate per se. Which cert are you referring to? The one that comes up when you browse to the webpage of the WLC, the eap device cert, or the webauth cert?
config certificate generate webadmin
config certificate generate webauth
will tell the WLC to generate it's own certificate for the webadmin, and webauth.
I'm not sure that the webadmin will clear the eapdevcert or not
HTH,
Steve
Please remember to rate helpful posts or to mark the quesiton as answered so that it can be found later.

How to delete the attachment for a particular to address in outlook using c#

I want to remove the attachments from outlook for a specific to address(for example if to address contain gamil.com then i want to delete the attachments) at the mail sending evevt. When we use multiple to address it give problems. I use the below code.
when i use multiple to address (like, xxx.gmail.com,yyy.yahooo.com) it remove the attachments for both mails.
pls help,
Thanks in advance....
string[] toa = mail.To.Split(';');
for (int a = 0; a <= toa.Count(); a++)
if(toa[a].Contains("gmail.com"))
//remove attachments

Hello,
You can handle the
ItemSend event of the Application class which is fired whenever an Microsoft Outlook item is sent, either by the user through an Inspector (before
the inspector is closed, but after the user clicks the Send button) or when the Send method
for an Outlook item, such as MailItem,
is used in a program.
Use the
Recipients property (a Recipients collection
that represents all the recipients for the Outlook item) of the MailItem class instead of the To property.
Use Recipients(index) or
Recipients.Item(index), where index is the name or index number, to return a single Recipient object. The name can be a string representing
the display name, the alias, or the full SMTP e-mail address of the recipient.
The Recipient class provides the
Address property which returns a string representing the e-mail address of the Recipient.
P.S. You can't remove the attachment for a specific email address. You need to send separate emails individually - with an attachment and without. In the ItemSend event handler you can check out the Recipients list and copy the source item
if you need to send the item without an attachment. Remove the "blocked" recipients from the original mail item and set them on the copied one. Then remove the attachment and send the copy.

How to get the output of a single command from multiple servers using power shell

Hi All,
I have a requirement in my project, wherein I have to find the database list on each server which has autoshrink option is enabled.
Below is the query which I'm using and I want to automate it in such a way that, I can give the input to powershell script with list of all servers and I need output in csv format which should be giving the database names for which autoshrink option is enabled.
select name from sys.databases where
is_auto_shrink_on=1
Thanks in Advance, Kranthi

foreach($instance in $instances){
Invoke-SqlCmd $query -ServerInstance $instance
https://msdn.microsoft.com/en-us/library/cc281720.aspx
¯\_(ツ)_/¯

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to delete the one of cost centers in Splitting Structure(OKEW)?

Dear All,
I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
How to delete the one of cost centers in Splitting Structure(OKEW)?
Jocha

Hi Chang
Welcome to SDN! Its our pleasure to help you here
Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
Br, Ajay M

ADF Desktop Integration : How to delete the table in Excel?

Hi,
I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
I could not find a way to delete that table.
I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
My question how to delete the table not corrupting the Excel.
Thanks
Pavan

Pavan,,
Welcome to OTN.
You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
Refer the documentation for more info.
http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
-Arun

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

Does any one know , how to delete the others in itunes. it takes lot of space

does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

How to delete the films in VLC in my ipad?

I sync some films(.avi) for VLC to my ipad via itune(I bought free VLC in ipad). One problem is too slow to see in ipad, many mosaic occurred. The other problem is how to delete the films in VLC on my ipad.. there is no any button to delete, only add button..

But what if the videos don't appear in the list under the Apps Tab >File Sharing?
They definitely are on the iPad. I can watch them with VLC. But the VLC list is empty when I select it. Most of my File Sharing lists are blank even though I can access the files I placed on there with my iPad. (Worse, Comic Reader has a list of files but none of those files are accessible on the iPad but a completely different set is readable on the iPad!)
Any ideas?

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

How to delete the Sites in SAP IS RETAIL

hello ALL,
can any one explain me how to delete the Sites in Sap Retail.
thanks in advance

Hello All,
Delete the plant / Site complete details and put in one transport and do the import & export.
Thanks.
Edited by: krishna cherry on Jul 26, 2010 3:28 PM

How to delete the old code in the EXIT_SAPLRSAP_001

Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
Narendra

Hi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja

How to delete the beta version in icloud?

I purchased iWork half an year ago and I use it in icloud. But since the beta version has appeared, it´s not possible to work with my own software. Who knows how to delete the beta version from icloud?

You can't delete it.
Why do you need to? Why can't you just work with your documents like everyone else does, by opening iWork software on your Mac and using File > Open, etc to see your docs that are in iCloud? Why would you need to use your browser?

How to delete the alarm "Certificate is near expiration" on multiple WAEs using WAAS CM

Similar Messages

Maybe you are looking for