How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

Similar Messages

How to delete a compressed request?

I have a full update request in my material movements cube that I want to delete and then attempt to reload from the PSA. When I go into the cube, highlight the reqeust, and click DELETE I get the message "Request ID 0000055001 is aggregated, compressed or scheduled"
How can I delete it?
Thanks!

Hi Patrick,
You cannot delete by the request ID if it is compressed. The other option would be to attempt Selective deletion by cube contents, if you can accurately highlight or pinpoint the data loaded by way of this request. Selective deletion is irreversible.
Hope this helps...

How to delete a specific request out of the InfoProvider

Hi all,
we have a generic datasource to extract our CO-PA data. Unfortunately this datasource can not deliver any delta at the moment. This is why we need to have a full upload. In InfoPackage we select the single period 001, 002, or 003.
Now in March we only need to load the period 003 daily. In my process chain I would like to have a function that deletes only the request of this infopackage and not also the requests of the previous months, so I don't need to load all everyday, but only the current month.
Do you know such a process type?
Thanks in advance!

Hi Sandra,
1. Try "Delete Overlapping Requests from InfoCube" process type.
2. You can also do this in the InfoPackage. Goto Data Targets tab "Automatic Loading of Similar/Identical Requests"
These two are only possible for a Cube.
Anup.

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

Deletion of compressed request in BI 7.0

Hi,
I have loaded info cube by using process chain, in process chain I added compressed.
How to delete the compressed request from info cube .
Note : System is BI 7.0.
Thank you for advance.
Regards.
Suman.

Hi Suman,
Greetings.
Yes you can perform selective deletion of data from the compressed request in the Cube.
Either you can go to Manage option in the Cube and schedue there or use TCode delete_facts and delete from there.
If in case you want to schedule this deletion in a process chain, you will need to generate the program using delete_facts in dev and copy it to a Z program in Dev and add that in a process chain. Now migrate the program and the process chain.
Schedule it howvere you want it to be.
Let me know if it helps.
Thanks
Sachin

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

DTP to Open Hub - How to delete failed previous request?

I have instituted the use of an open hub destination to export data to a csv file using a process chain.
Occasionally, the attempt fails and subsequent runs of the process chain also fail because the previous attempt is "red".
Is there any way to specifically delete the failed request from within the process chain?
The error message speaks of setting the "Automatically Repeat Red Requests in Process Chains" indicator, but I have not found it!
I will award points to helpful solutions.
Thank you in advance.
Andy

Thanks YJV.
But what I am asking is how to embed this in a process chain so that each time it runs, it first deletes all previous requests. There is such a command for regular DTP's but not for the ones that export to open hub. At least they do not appear in the F4 list when trying to generate this command in the process chain.
Therefore, I am still looking for either the mentioned indicator which can be set for (all) DTP's or for a way to delete all related requests from within a process chain.
Andy

Deletion of compressed request in cube

Hi All,
Is there any way i can delete a compressed request in a cube
and please keep mind that I also have other request in the cube there should not be deleted at any case as the source system of these requests is not connected to BW system now.
Regards,
Antony

Hi,
no, you can't delete a compressed request.
What you can do is to post the request reversal (all keyfigs x -1) provided you still have the data in the PSA or you can reextract it
or you can selectively delete the data of this request if you can find a selection criteria of the data to be deleted....
can you give more details on this request? was it a delta? coming from which DSource?
hope this helps...
Olivier.

Deletion of compressed requests

Hi,
can anybody tell me is there any way to delete compressed requess in cube.

Hi,
You can not delete a compressed request.
When you compress a request it moves from the F fact table to E fact table. Here in the E fact table you do not have the request-id column, hence the data can not be recognized with the request number when it is compressed(when the data is in E fact table).
One thing you can do is delete the data based upon selections >> Selective deletion can be performend in such cases if you have any particular parameters ex: date, doc no. range etc etc. to do so.
Regards,

I transferred pictures over from my computer to my iPhone 5 and now i cannot delete them on the phone and cannot work out how to delete them from my phone by the computer?

I trasferred pictures over from my computer to my iPhone 5 and now i cannot delete these pictures from my phone, and i cannot work out how to delete them from my phone by the computer as the pictures do not show up in my files on the computer, how can i remove them i have over 400 pictures that need removing?

If you have a Mac with iPhoto, plug the iPhone in and open iPhoto. Choose to import the photos. Once they have been imported, there should be an option to "Remove Imported Photos from Device". Choose this.

How to track the transport request number for the Role/Composit Role

Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
Ravi

Use transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards

How to delete an operation from order using the bapi

Can somebody please tell me how to delete an operation from order using the bapi
BAPI_ALM_ORDER_MAINTAIN.
Following was the test data for the BAPI.
000000 OPERATION DELETE 0000040052810070
000000 SAVE 0000040052810070
Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
So, can you please tell me where Iam going wrong.

Hi Subash Mohanvel,
Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
Unless you call this database saving of the records/values will not get reflected in the system.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Oh, PLEASE IGNORE the line:
deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
That was left there inadvertedly. Can't seem to find the edit button here...

How to delete the compressed Request ID in the info cube... ?

Similar Messages

Maybe you are looking for