How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

Similar Messages

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete a compressed request?

I have a full update request in my material movements cube that I want to delete and then attempt to reload from the PSA. When I go into the cube, highlight the reqeust, and click DELETE I get the message "Request ID 0000055001 is aggregated, compressed or scheduled"
How can I delete it?
Thanks!

Hi Patrick,
You cannot delete by the request ID if it is compressed. The other option would be to attempt Selective deletion by cube contents, if you can accurately highlight or pinpoint the data loaded by way of this request. Selective deletion is irreversible.
Hope this helps...

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

How to delete the spool request number

HI Masters,
            My program creates a spool request. And i want to delete that spool request number? How to delete that??
              Thanks in advance.

hi
good
The program are RSPO0041 or RSPO1041.
This is handy whenever you encounter a user who managed to create a lot of spool requests which are choking your system.
Deleting them with SP01 will be too slow and you will get time out if it exceed the online time limit specify by your basis people.
<b><REMOVED BY MODERATOR></b>
thanks
mrutyun^
Message was edited by:
        Alvaro Tejada Galindo

How to delete the previous request in Cube ?

Hi All
I have 2 sources loaded to Cube..
Ex:
ODS A --> Cube 1
ODS B --> Cube 1
Today they 31.10.2011 for both in CUBE1
so it becomes...
ODS A --> Cube 1 --> 31.10.2011
ODS B --> Cube 1 --> 31.10.2011
tomorrow they load... CUBE 1 shld be..
ODS A --> Cube 1 > 31.10.2011--
DELETED
So finally my cube has only following requests..
ODS B --> Cube 1 --> 31.10.2011
ODS A --> Cube 1 --> 01.11.2011
ODS B --> Cube 1 --> 01.11.2011
ODS A request which is older than 1day must be deleted before loading the next day...
Can I use DELETE OVERLAPPING requests for this requirement? I am not too sure...what are the steps to be created..?
as I tried but it was not successful.
can anyone help me with IDEAS or steps??
thanks a lot

yes, you are right. You should use Delete overlapping request option.
If it is not working, please let us know what option did you select for overlapping request deletion, may be you missed something there because overlapping request deletion is the best fit for your requirement.
One thing you need to make sure that loads on both the days are done through PC only.
If you do a manual load on 31.10.2011 and then PC loads data on 01.11.11, overlapping request deletion step will not delete the request loaded manually on 31st but if loads are done throught PC only, there should not be a problem.
Regards,
Gaurav

Deletion of compressed request in BI 7.0

Hi,
I have loaded info cube by using process chain, in process chain I added compressed.
How to delete the compressed request from info cube .
Note : System is BI 7.0.
Thank you for advance.
Regards.
Suman.

Hi Suman,
Greetings.
Yes you can perform selective deletion of data from the compressed request in the Cube.
Either you can go to Manage option in the Cube and schedue there or use TCode delete_facts and delete from there.
If in case you want to schedule this deletion in a process chain, you will need to generate the program using delete_facts in dev and copy it to a Z program in Dev and add that in a process chain. Now migrate the program and the process chain.
Schedule it howvere you want it to be.
Let me know if it helps.
Thanks
Sachin

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to delete the request in se10

Hi Experts,
How to delete the request in se10 ....plz explain
Regards
Venkat

Hi,
Go to SE10,select the request which you wnat to delete.You will find a delete icon on the top.Select it.
This will delete the request.
Make sure that this request is the one which is under ur ID.If you want to delete the request which is under other ID,it wont allow to delete.
Thanks & Regards,
Suchitra.V

How to delete the Request Number

Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

How to delete the compressed request in bi 7.0?

Similar Messages

Maybe you are looking for