How to delete the dat afrom the Ztable in GRP

Hello Experts,
                         How we can delete the data from the Ztable created by the developer , in the Production server ,please give a brief idea  about it , thanks in advance.

see this:
to delete data from z table
also follow this mentioned by jagadish in above thread:
start tr. se16n
type the table name and press ENTER.
Then type the string "&sap_edit" into the command line and strike Enter
again.
enter your selection criteria.
run.(F8)
now you can easily delete the lines you want (and then save)
All Changes are noted in the tables
SE16N_CD_DATA and
SE16N_CD_KEY.

Similar Messages

  • How to delete the duplicate email address in BP master data

    Hi,
    When  you get an email ids from the third party vendor and you are loading into CRM BP master data.  how to delete the duplicate email address already exits in the system.  In CRM you can create the same BP with different id.   I would like to know how to delete the email address during importing email addresses from the third party tool.
    During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data. 
    If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
    thanks,
    arul

    Hello Arul,
    welcome to the SDN CRM Development forum.
    1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
    2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
    3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
    Regards
    Gregor

  • How to delete the data in the compressed  infocube

    hi, bi gurus
    we are facing a problem in inventory management the info cube in BW production
    normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
    now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
    can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
    option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
    info cube and load the correct data which we are having in PSA
    Thanks
    Joe

    Hi André
    Thanks you for ur answer
    what i am telling is their is an option for selective deletion for inventory cube
    but i don't find any specific option to delete the data that means like calendar day like that
    i hope you got my question.
    hi Saveen Kumar,
    Thank you again
    we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
    next we need to do compression also or not
    and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
    can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
    Thanks in adavance
    Thanks,joe

  • How to delete the data from partition table

    Hi all,
    Am very new to partition concepts in oracle..
    here my question is how to delete the data from partition table.
    is the below query will work ?
    delete from table1 partition (P_2008_1212)
    we have define range partition ...
    or help me how to delete the data from partition table.
    Thanks
    Sree

    874823 wrote:
    delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
    Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
    How the table implements its structure is a physical design consideration.
    Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
    When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
    And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
    Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
    This is a crucial concept to understand and get right.

  • How to delete aggreagetd data in a cube without deleting the Aggregates?

    Hi Experts,
    How to delete aggreagetd data in a cube without deleting the Aggregates?
    Regards
    Alok Kashyap

    Hi,
    You can deactivate the aggregate. The data will be deleted but structure will remain.
    If you switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. Switching off the aggreagte won't delete any data,but temporarly the aggregate will not be availbale as if it is not built on the info cube. No reporting is not possible on swtiched off aggregates. The definition of the aggregate is not deleted.
    You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.This aggregate will be having data from the previous load's. If the aggregate is switched off means it wont be available for reporting but data can be rolled up into it.
    If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
    The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
    Later when you need those aggregate once again you have to create it from scratch.
    Hope this helps.
    Thanks,
    JituK

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • How to delete the total entries in ztable

    Hi ,
    How to delete the total entries in ztable...
    code pls.
    regards,

    Hi Venkat,
    pls see below records,
    Plant  Material                       Alternate material
    3770  00000000000126875          2020202
    3770  000000000005999335        2020202
    3770  117196                           2020202
    3780  00000000000126875           2020202
    3784  00000000000126875         2020202
    3784  000000000002809336       2020202
    3784  000000000005999335        2 020202
    3789  00000000000126875            2020202
    if  i write below syntax ,
    delete from ztable where matkl = '2020202'.
    all records contains  matkl = '2020202' will be deleted ??
    pls. reply.

  • How to delete the Hierarchy data from Infoobjects.

    How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
    When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

    Hi
    Go to SE11 and enter the hierarchy table name.
    /BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
    Thanks
    TG

  • How to delete the sales org information from BP Master Data in SAP CRM 5.0

    Hi Guruu2019s
    How to delete the sales org information from BP Master Data in SAP CRM 5.0
    Thanks...
    Mahesh Pasupunuri

    Hello
    There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
    Regards
    Joaquin

  • HT2905 Most all of my 1700 songs have been duplicated in iTunes. I have downloaded the instructions how to delete the duplicates but it says "sort by the date you added" and i have no column that says that. I am running windows xp.

    Most all of my 1700 songs have been duplicated in iTunes. I have downloaded the instructions how to delete the duplicates but it says "sort by the date you added" and i have no column that says that. I am running windows xp.

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • How to delete the data based on concurrent request Id

    Hi
    from account receivable to gl i am posted a cheque through concurrent program.
    right now my problem is I want to delete that data in database tables based on concurrent request id.
    how to delete that data based on concurent request id, Please give me some suggessions

    What is the application version ? what exactly you want to achieve ?
    Direct deletion is not recommended in oracle application database.
    regards,

  • How to Delete the dimension from the cube ?

    Hi ,
    how to Delete the dimension from the cube ?
    i have added the new dimension by assiging one characteristic to that dimension .
    now i  want to delete it ,
    but system saying that   Dimension ZXXX  contains InfoObjects; deletion not possible .
    how to delete it ? any help .
    Thanks

    Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
    Right click on the cube-->Delete data.
    Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
    Then right click on Dimension-->Delete
    Regards,
    Pavan

  • Reg:How to delete the column in table control also from database table.

    Hi Experts,
    Once again thank u all for giving the responses.
    one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
    With Regards,
    Saroja.P.

    Hi,
    If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
    "This portion of code inside the LOOP...ENDLOOP.
    IF sy-ucomm eq 'F_DELETE'.
       gt_itab2-check = mark.  " Store the MARK field status into your internal table's correspoding field 'check'
      MODIFY gt_itab INDEX tabcontrol-current_line.
    ENDIF.
    iF sy-ucomm eq 'DELETE1'.
      DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
    ENDIF.
    Now you can modify your database table using the MODIFY statement.
    MODIFY ZDB FROM TABLE gt_itab.

  • Does any one know , how to delete the others in itunes. it takes lot of space

    does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

    Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
    There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

  • How to delete the old code in the EXIT_SAPLRSAP_001

    Hi All,
    In R3 system, I wrote an exit for 2LIS_11_VAHDR  by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
    and can we create new project and can we assign to the Enhancement RSAP0001.
    Can anybody suggest me in this
    Thanks in advance......
    Narendra

    Hi Narendra,
    You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
    SE38>zxrsau01>change-->find out your data source
    Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
    If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
    Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
    Hope it helps
    Thanks
    Teja

Maybe you are looking for