How  to delete the data in PSA

Hi,

Hi,
there is one easy way to delete data from PSA .You can create a process chain have one delete data from PSA step where you need to give PSA table name and request older than (no of days before which you want to delete data ).
Execute it and it will delete all the data before specified no of days .You can add multiple PSA tables here and can delete whole data in one go .
Regards,
Jaya

Similar Messages

  • How to delete the data in the compressed  infocube

    hi, bi gurus
    we are facing a problem in inventory management the info cube in BW production
    normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
    now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
    can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
    option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
    info cube and load the correct data which we are having in PSA
    Thanks
    Joe

    Hi André
    Thanks you for ur answer
    what i am telling is their is an option for selective deletion for inventory cube
    but i don't find any specific option to delete the data that means like calendar day like that
    i hope you got my question.
    hi Saveen Kumar,
    Thank you again
    we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
    next we need to do compression also or not
    and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
    can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
    Thanks in adavance
    Thanks,joe

  • How to delete the data from partition table

    Hi all,
    Am very new to partition concepts in oracle..
    here my question is how to delete the data from partition table.
    is the below query will work ?
    delete from table1 partition (P_2008_1212)
    we have define range partition ...
    or help me how to delete the data from partition table.
    Thanks
    Sree

    874823 wrote:
    delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
    Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
    How the table implements its structure is a physical design consideration.
    Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
    When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
    And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
    Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
    This is a crucial concept to understand and get right.

  • How to delete the data in a table using function

    hi all,
    i need to delete the data in a table using four parameters in a function,
    the parameters are passed through shell script.
    How to write the function
    Thanks

    >
    But the only thing is that such function cannot be used in SQL.
    >
    Perhaps you weren't including the use of autonomous transactions?
    CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
    PRAGMA AUTONOMOUS_TRANSACTION;
    tot_emps NUMBER;
    BEGIN
    SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
    DELETE FROM emp3
    WHERE empno = employee_id;
    COMMIT;
    tot_emps := tot_emps - 1;
    RETURN TOT_EMPS;
    END;
    SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
    REMOVE_EMP(7499)
                  12
    SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
    REMOVE_EMP(7521)
                  11
    SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
    REMOVE_EMP(7566)
                  10
    SQL>

  • How to Delete the Data in Cube and in ODS

    Hi ALL,
            I have a cube and an ODS both the data targets have data from the year 2002 to 2005.now i want to delete the data from both the data targets with respect to data related to the year 2003 only,how can it be done. Any Help Appreciated with rewarding points.
    Regards,
    BW Seeker.

    Hi
    Generally we can delete the data in the request for the data of year 2003 from request tab in manage screen of datatarget. This can be done only when we are sure that that particular request/s belongs to 2003 year data.
    This can be better handled with selective deletion of data for year 2003 with some keyfields like 0CALMONTH etc..
    This is infact only way when you have already compressed the data in Infocube.
    Hope it helps...
    Best Regards,
    DMK
    *Assign points if it helps...

  • How to delete the date in podcast or blog page?

    Hi,
    I would like to delete the dates showing on the first page of my podcast and blog pages - how do i do this in iWeb?
    Thank you for your help!
    Boaz

    You don't want to delete that date as it will affect RSS feeds, etc. However you can hide the date.  See this topic:  How to make the 'date' disappear on the...: Apple Support Communities
    OT

  • How to delete the data in P,Q and S table

    Hi All,
    I want to delete the data in /BIO/PCOSTCENTER, /BIO/QCOSTCENTER AND /BIO/SCOSTCENTER. Since we have transported the costcenter infoobject from 3.0B to BI 7. But the 3.0B doesnot contain the ALPHA conversion. So we need to delete the infoobject and install from BI content.
    When I am trying to activate the BI 7 obj, It is giving the error message the above tables are containing the data.
    Pls suggest how to delete them and activate the 0COSTCENTER with BI 7 version.
    Points will be awarded.
    Thanks
    Sathiya

    Program RSDMD_DEL_BACKGROUND is the appropriate choice to delete master data.   You should be able to search OSS notes on te pgm to get a little more info on it.
    It insures referential integrity by checking all InfoProviders to make sure a master data value for that InfoObject does not exist in any InfoProviders.  This might not be an issue in your case if you are dealing with a newly activated object that you have don't have in any Infoproviders, but is the only the best way to delete master data.

  • How to delete the dat afrom the Ztable in GRP

    Hello Experts,
                             How we can delete the data from the Ztable created by the developer , in the Production server ,please give a brief idea  about it , thanks in advance.

    see this:
    to delete data from z table
    also follow this mentioned by jagadish in above thread:
    start tr. se16n
    type the table name and press ENTER.
    Then type the string "&sap_edit" into the command line and strike Enter
    again.
    enter your selection criteria.
    run.(F8)
    now you can easily delete the lines you want (and then save)
    All Changes are noted in the tables
    SE16N_CD_DATA and
    SE16N_CD_KEY.

  • How to push the data from PSA to Data Target in 3.5 version

    Hi Experts,
    I'm currently working on BI 7. I have some master data load being maintained in 3.5 version.
    The infopackage has an option to load the data to psa and data target when extracted.
    I want to stage the data at PSA only.
    Later I want to trigger it to the target.
    In 7 version we use DTP but I'm not very sure what should I do here.
    Can anyone please help me to push the data to the target please using 3.5 version.
    Thanks

    Hi pathak,
    Thanks for your reply. I'm able to do it.
    Can you please tell me how do I filter the load to target.
    We have filter in DTP where i can restrict the load.
    Do we have any option in 3.5.
    Please advice.
    Thanks

  • How to delete the data based on concurrent request Id

    Hi
    from account receivable to gl i am posted a cheque through concurrent program.
    right now my problem is I want to delete that data in database tables based on concurrent request id.
    how to delete that data based on concurent request id, Please give me some suggessions

    What is the application version ? what exactly you want to achieve ?
    Direct deletion is not recommended in oracle application database.
    regards,

  • How long can the data in PSA be kept?

    Hello all,
    If a PSA is used for data staging, how long can/should the data be kept in it in a real-time scenario?
    Your help will be very much appreciated,
    points will be awarded too.
    Thanks
    S N

    HI ,
    It always depends on the Frequency of data load and the retention of the data in the system . Ideally we only keep 2 days of data in PSA in case of full load and then keep all the delta loads in the PSA including the Intialization Request in the PSA , so that any problem occurs we can load the data from PSA .
    But before all that u need to diccuss with ur basis team regarding space or table space . And according to that u need to keep the requests in System.
    Assign points if it helps....
    Regards,
    Vijay

  • How to delete the data loaded into MySQL target table using Scripts

    Hi Experts
    I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
    My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
    But in the script i have written the code as
    sql('database','delete from <tablename>');
    but as it is an SQL Query execution it is rising exception for the query.
    How can i delete the data loaded into MySQL Target table using scripts.
    Please guide me for this error
    Thanks in Advance
    PrasannaKumar

    Hi Dirk Venken
    I got the Solution, the mistake i did was the query is not correct regarding MySQL.
    sql('MySQL', 'truncate world.customer_salesfact_details')
    error query
    sql('MySQL', 'delete table world.customer_salesfact_details')
    Thanks for your concern
    PrasannaKumar

  • How to delete the data in ODS

    Hi,
    I am working for production support project.I want to delete the data(error data) from ODS and willing to reload the data again to ODS with different data(Corrected data).
    Can any body throw some light on this please.
    karunakar reddy

    hi karunkar,
            I am also in production support but new . I have some queery can I have your mail id to contact you.currently I a, located in singapore at client side. I will appritiate you if you we can have some knowledge sharing.
      With best Regards
         Vikas Sharma

  • How to delete the data from KNVP without using the delete statement

    Hello friends,
    I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
    Can you please tell me the name of the standard program or BAPI to delete the data .
    Thanks in Advance
    Kuldeep

    Hello Raymond,
    I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
    =============================================================
    REPORT  ZK_TEST2                                .
    data :
        I_KNA1     LIKE     KNA1,
        I_KNB1     LIKE     KNB1,
        I_KNVV     LIKE     KNVV,
        I_YKNA1     LIKE     KNA1,
        I_YKNB1     LIKE     KNB1.
    Data :
    T_XKNAS       LIKE     FKNAS occurs 0,
    T_XKNB5     LIKE     FKNB5 occurs 0,
    T_XKNBK     LIKE     FKNBK occurs 0,
    T_XKNVA     LIKE     FKNVA occurs 0,
    T_XKNVD     LIKE     FKNVD occurs 0,
    T_XKNVI     LIKE     FKNVI occurs 0,
    T_XKNVK     LIKE     FKNVK occurs 0,
    T_XKNVL     LIKE     FKNVL occurs 0,
    T_XKNVP     LIKE     FKNVP occurs 0 with header line,
    T_XKNVS     LIKE     FKNVS occurs 0,
    T_XKNEX     LIKE     FKNEX occurs 0,
    T_XKNZA     LIKE     FKNZA occurs 0,
    T_YKNAS     LIKE     FKNAS occurs 0,
    T_YKNB5     LIKE     FKNB5 occurs 0,
    T_YKNBK     LIKE     FKNBK occurs 0,
    T_YKNVA     LIKE     FKNVA occurs 0,
    T_YKNVD     LIKE     FKNVD occurs 0,
    T_YKNVI     LIKE     FKNVI occurs 0,
    T_YKNVK     LIKE     FKNVK occurs 0,
    T_YKNVL     LIKE     FKNVL occurs 0,
    T_YKNVP     LIKE     FKNVP  occurs 0 with header line,
    T_YKNVS     LIKE     FKNVS occurs 0,
    T_YKNEX     LIKE     FKNEX occurs 0,
    T_YKNZA     LIKE     FKNZA occurs 0.
    T_XKNVP-KUNNR     =     '7000002648'     .
    *T_XKNVP-VKORG     =     '0001'     .
    *T_XKNVP-VTWEG     =     '01'     .
    *T_XKNVP-SPART     =     '01'     .
    T_XKNVP-KZ      =     'D'     .
    append T_XKNVP to T_XKNVP.
    CALL FUNCTION 'CUSTOMER_UPDATE'
      EXPORTING
        I_KNA1        = I_KNA1
        I_KNB1        = I_KNB1
        I_KNVV        = I_KNVV
        I_YKNA1       = I_YKNA1
        I_YKNB1       = I_YKNB1
      TABLES
        T_XKNAS       = T_XKNAS
        T_XKNB5       = T_XKNB5
        T_XKNBK       = T_XKNBK
        T_XKNVA       = T_XKNVA
        T_XKNVD       = T_XKNVD
        T_XKNVI       = T_XKNVI
        T_XKNVK       = T_XKNVK
        T_XKNVL       = T_XKNVL
        T_XKNVP       = T_XKNVP
        T_XKNVS       = T_XKNVS
        T_XKNEX       = T_XKNEX
        T_XKNZA       = T_XKNZA
        T_YKNAS       = T_YKNAS
        T_YKNB5       = T_YKNB5
        T_YKNBK       = T_YKNBK
        T_YKNVA       = T_YKNVA
        T_YKNVD       = T_YKNVD
        T_YKNVI       = T_YKNVI
        T_YKNVK       = T_YKNVK
        T_YKNVL       = T_YKNVL
        T_YKNVP       = T_YKNVP
        T_YKNVS       = T_YKNVS
        T_YKNEX       = T_YKNEX
        T_YKNZA       = T_YKNZA
    =============================================================

  • Delete the data from PSA

    Hello!
    I had unsuccessful data transfer process.
    How can I delete the contents of the PSA and load the file into the PSA again?
    (tcode, execute steps)
    Thank you very much!
    regards
    Thom

    Hi,
    Goto - Rsa1 - Modeling tab - datasource - Application Component - Datasource - right click - manage - Select the request and delete then request is deleted from PSA.
    Now load data to PSA throught infopackage.
    With Regards,
    PCR

Maybe you are looking for

  • I bought app in App Store on my Mac Book Pro and now it won't let me run

    I bought Barcody Express on my Mac Book Pro in the App Store while up in Seattle, WA and it ran fine at first. 2 weeks later I'm back in L.A. and I get a box asking me to verify my apple ID because this is not the computer on which I bought it and it

  • "Help" error 404 in Dreamweaver CS6

    I have just purchased Dreamweaver CS6 after more than twelve years of web-site development using NetObjects Fusion and hand-coding. Conscious of the step-up in possibilities offered by CS6, I am keen to learn as I go (un-learning my existing bad habi

  • Call_form problem in Forms 10g

    I am using Developer 10g R2. I tried to call a form named form1 from another form. But it can not open the form and shows the following error: FRM 40010: Can not read form form1. Then I tried other functions open_form, Go_form. But it does not work.

  • Downloading Sap Office Document in Webdypro

    Hello All, I have to provide a link to a document that is present in SAP Office Folder. I am able to read the document using SO_OBJECT_GET_CONTENT. But the contents are in the form of a table of character type. The File download UI Component of Webdy

  • CollectionBucketStyle in Mapviewer

    Hello Has something changed in building CollectionBucketStyle in Mapviewer? We are using Mapviewer 904 and CollectionBucketStyle works fine in this version, however when we migrated to Mapviewer version 101202, our code doesn't work. Any suggestions,