How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

Similar Messages

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

How to delete the Request Number

Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to delete the one of cost centers in Splitting Structure(OKEW)?

Dear All,
I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
How to delete the one of cost centers in Splitting Structure(OKEW)?
Jocha

Hi Chang
Welcome to SDN! Its our pleasure to help you here
Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
Br, Ajay M

ADF Desktop Integration : How to delete the table in Excel?

Hi,
I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
I could not find a way to delete that table.
I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
My question how to delete the table not corrupting the Excel.
Thanks
Pavan

Pavan,,
Welcome to OTN.
You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
Refer the documentation for more info.
http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
-Arun

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

Does any one know , how to delete the others in itunes. it takes lot of space

does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

How to delete the films in VLC in my ipad?

I sync some films(.avi) for VLC to my ipad via itune(I bought free VLC in ipad). One problem is too slow to see in ipad, many mosaic occurred. The other problem is how to delete the films in VLC on my ipad.. there is no any button to delete, only add button..

But what if the videos don't appear in the list under the Apps Tab >File Sharing?
They definitely are on the iPad. I can watch them with VLC. But the VLC list is empty when I select it. Most of my File Sharing lists are blank even though I can access the files I placed on there with my iPad. (Worse, Comic Reader has a list of files but none of those files are accessible on the iPad but a completely different set is readable on the iPad!)
Any ideas?

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

How to delete the Sites in SAP IS RETAIL

hello ALL,
can any one explain me how to delete the Sites in Sap Retail.
thanks in advance

Hello All,
Delete the plant / Site complete details and put in one transport and do the import & export.
Thanks.
Edited by: krishna cherry on Jul 26, 2010 3:28 PM

How to delete the old code in the EXIT_SAPLRSAP_001

Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
Narendra

Hi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja

How to delete the beta version in icloud?

I purchased iWork half an year ago and I use it in icloud. But since the beta version has appeared, it´s not possible to work with my own software. Who knows how to delete the beta version from icloud?

You can't delete it.
Why do you need to? Why can't you just work with your documents like everyone else does, by opening iWork software on your Mac and using File > Open, etc to see your docs that are in iCloud? Why would you need to use your browser?

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

How to delete the delta queue in the ECC

Similar Messages

Maybe you are looking for