How to delete the entries in internal table

Hi Experts,
I have 2 internal tables ,
if i find any same entries of 2 internal tables, i have to delete that entries in first internal table.
Regards,
Srinivasu

hi check this..
report .
data:begin of itab occurs 0,
     f1 type c ,
     f2 type i,
     end of itab .
data:begin of itab1 occurs 0,
     f1 type c ,
     end of itab1 .
     itab-f1 = 'A'.
     itab-f2 = 12.
     append itab .
     itab-f1 = 'b'.
     itab-f2 = 12.
     append itab .
     itab-f1 = 'c'.
     itab-f2 = 12.
     append itab .
     itab1-f1 = 'A'.
     append itab1 .
loop at itab1 .
read table itab with key f1 = itab1-f1 .
if sy-subrc = 0.
delete itab where f1 = itab1-f1 .
endif .
endloop.
loop at itab.
write:/ itab-f1,itab-f2.
endloop.

Similar Messages

Regarding how to delete the record in internal table

Hi experts ,
how to delete the record in intarnal table after validating the data,
if record contains invalid fields?
i am giving my code see this and give me the answer?
loop at it_data into wa_data .
Validate Cost Center
    READ TABLE it_kostl INTO wa_kostl WITH KEY kostl = wa_data-kostl BINARY SEARCH.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-004.
    ENDIF.
Validate source file material ( material number )
loop at it_mara into wa_mara .
read table it_ausp into wa_ausp with key atwrt = wa_data-i_matnr .
           if sy-subrc NE 0 .
   PERFORM update_error_log USING wa_data
                                       text-002.
delete it_data-objek .
     else.
read table it_mara into wa_mara with key matnr = wa_ausp-objek .
       if sy-subrc EQ 0 .
       wa_data-objek = wa_mara-matnr.
       wa_data-matkl = wa_mara-matkl.
     ENDIF.
     Modify it_data from wa_data .
endif.
*endloop.
Validate unit of measure (unit)
    READ TABLE it_t006 INTO wa_t006 WITH KEY msehi = wa_data-unit .
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-003.
    endif.
Validate delivery location ( storage location )
    READ TABLE it_lgort INTO wa_lgort WITH KEY del_loc = wa_data-del_loc.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-001.
         if wa_data-flag ='x' .
      delete it_data from wa_data .
    endif.
    ENDIF.
endloop.

Hi Naren,
First get the index number of the IT_data table and store it in one variable whose declaration like this.
data: tabix type sy-tabix.
while reading the internal table it_data set the tabix variable.
tabix = sy-tabix.
Instead of the above use below one.
Delete it_data-objek
Use the Below statement it will delete the row from the internal table.
Delete it_data-objek index tabix
Thanks,
Chidanand

How to delete the entries in CDCLS table

Hi All,
There is a potential issue with the size of table CDCLS on production system. We need to reduce or manage the amount of data in this table. CDCLS is a cluster table and cannot be reduced directly,
So first we were reduced the entries in CDHDR and then from CDPOS tables.
After that we tried to reduce the entries from CDCLS table through the program - RSSCD7RE, We are facing the error as - no data available and No active archive key was selected.
Please help me out, how to proceed further in this task. Thanks in advance.

Go to DB15 and see the archiving object.
You can also use the archiving object CHANGEDOCU, please refer SAP documents for that.
Transaction is
SARA -> Archive object CHANGEDOCU
Message was edited by:
ANIRUDDHA DAS

How to delete the entries from NAST table

Hi,
Please help me out by providing any function module that delete's the entries from hte NAST table.
Regards,
Kiran.L

REPORT ZSCD_TEST13.
delete from nast where VSTAT = '1'.
=====
If you see the FM : NAST_DELETE_OBJECT, its only useful when NACHA = 7 (i.e. message transmission medium = Simple Mail)
For others its not useful.
We had similar issue few days back and after long RnD, we straightaway deleted the entries using the Zprogram.
regards,
Edited by: Pranu Pranu on Aug 19, 2008 1:42 PM

How to check duplicate entries in internal table??

Dear Friends,
How to check duplicate entries in internal table??
Exp: In my internal table if I am having the same records more then ones then I need to print the error message, here I am using steploop for selecting the values from screen, and the values are coming into my internal table if user enter the same value more then ones I need to print the error message.
Thanks,
Sridhar

Hi,
After storing the data into internal table say ITAb, move the data into another internal table.
t_dup[] = itab[].
LOOP AT itab.
    count1 = count1 + 1.
    itab-count1 = count1.
    MODIFY itab.
ENDLOOP.
LOOP AT t_dup.
    count2 = count2 + 1.
    t_dup-count2 = count2.
    MODIFY t_dup.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab.
LOOP AT t_dup.
    record_dup = 'N'.
    READ TABLE itab WITH KEY count1 = t_dup-count2.
    IF sy-subrc = 0.
      record_dup = 'Y'.
    ENDIF.
    IF record_dup NE 'Y'.
      t_dup-message = 'DUPLICATE ENTRY'.
      t_dup-flag = 1.
      MODIFY t_dup.
    ENDIF.
ENDLOOP.
Use this sample code.
Reward pts if it is helpfull.
Regards
Srimanta

How to Delete a Column in Internal Table

Hi All,
Does any one know ,How to Delete a Column in Internal Table?

Hi,
For deleting the column in the internal table, you have to eliminate the field which you want to delete.
loop at itab into wa.
move corresponding wa to wa1.
append wa1 to itab1.
clear wa1.
clear wa.
endloop.
wa1 is the workarea without the field which you want to delete.
itab1 is the internal table which consists of the deleted column.

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How to increase the length of internal table dynamically

How to increase the length of internal table dynamically depending on the number of fields fetched into the internal table ?
The requirement code :
types: begin of t_data,
         form          like zscr_data_hdr-form,
         werks         like zscr_data_hdr-werks,
         matnr         like zscr_data_hdr-matnr,
         verid         like zscr_data_hdr-verid,
         lot           like zscr_data_hdr-lot,
         lot_qty       like zscr_data_hdr-lot_qty,
         udate         like zscr_data_hdr-udate,
         utime         like zscr_data_hdr-utime,
         zuser         like zscr_data_hdr-zuser,
         processed     like zscr_data_hdr-processed,
         defect        like zscr_defect_data-defect,
         vornr         like zscr_route_data-vornr,
         fld1          like zscr_defect_data-defect_val,
         fld2          like zscr_defect_data-defect_val,
         fld3          like zscr_defect_data-defect_val,
         fld4          like zscr_defect_data-defect_val,
         fld5          like zscr_defect_data-defect_val,
         fld6          like zscr_defect_data-defect_val,
         fld7          like zscr_defect_data-defect_val,
         fld8          like zscr_defect_data-defect_val,
         fld9          like zscr_defect_data-defect_val,
         fld10         like zscr_defect_data-defect_val,
         fld11         like zscr_defect_data-defect_val,
         fld12         like zscr_defect_data-defect_val,
         fld13         like zscr_defect_data-defect_val,
         fld14         like zscr_defect_data-defect_val,
         fld15         like zscr_defect_data-defect_val,
         fld16         like zscr_defect_data-defect_val,
         fld17         like zscr_defect_data-defect_val,
         fld18         like zscr_defect_data-defect_val,
         fld19         like zscr_defect_data-defect_val,
         fld20         like zscr_defect_data-defect_val,
         fld21         like zscr_defect_data-defect_val,
         fld22         like zscr_defect_data-defect_val,
         fld23         like zscr_defect_data-defect_val,
         fld24         like zscr_defect_data-defect_val,
         fld25         like zscr_defect_data-defect_val,
         fld26         like zscr_defect_data-defect_val,
         fld27         like zscr_defect_data-defect_val,
         fld28         like zscr_defect_data-defect_val,
         fld29         like zscr_defect_data-defect_val,
         fld30         like zscr_defect_data-defect_val,
         fld31         like zscr_defect_data-defect_val,
         fld32         like zscr_defect_data-defect_val,
         fld33         like zscr_defect_data-defect_val,
         fld34         like zscr_defect_data-defect_val,
         fld35         like zscr_defect_data-defect_val,
         fld36         like zscr_defect_data-defect_val,
         fld37         like zscr_defect_data-defect_val,
         fld38         like zscr_defect_data-defect_val,
         fld39         like zscr_defect_data-defect_val,
         fld40         like zscr_defect_data-defect_val,
         fld41         like zscr_defect_data-defect_val,
         fld42         like zscr_defect_data-defect_val,
         fld43         like zscr_defect_data-defect_val,
         fld44         like zscr_defect_data-defect_val,
         fld45         like zscr_defect_data-defect_val,
         fld46         like zscr_defect_data-defect_val,
         fld47         like zscr_defect_data-defect_val,
         fld48         like zscr_defect_data-defect_val,
         fld49         like zscr_defect_data-defect_val,
         fld50         like zscr_defect_data-defect_val,
         fld51         like zscr_defect_data-defect_val,
         fld52         like zscr_defect_data-defect_val,
         fld53         like zscr_defect_data-defect_val,
         fld54         like zscr_defect_data-defect_val,
         fld55         like zscr_defect_data-defect_val,
         fld56         like zscr_defect_data-defect_val,
         fld57         like zscr_defect_data-defect_val,
         fld58         like zscr_defect_data-defect_val,
         fld59         like zscr_defect_data-defect_val,
         fld60         like zscr_defect_data-defect_val,
         fld61         like zscr_defect_data-defect_val,
         fld62         like zscr_defect_data-defect_val,
         fld63         like zscr_defect_data-defect_val,
         fld64         like zscr_defect_data-defect_val,
         fld65         like zscr_defect_data-defect_val,
         fld66         like zscr_defect_data-defect_val,
         fld67         like zscr_defect_data-defect_val,
         fld68         like zscr_defect_data-defect_val,
         fld69         like zscr_defect_data-defect_val,
         fld70         like zscr_defect_data-defect_val,
         fld71         like zscr_defect_data-defect_val,
         fld72         like zscr_defect_data-defect_val,
         fld73         like zscr_defect_data-defect_val,
         fld74         like zscr_defect_data-defect_val,
         fld75         like zscr_defect_data-defect_val,
         fld76         like zscr_defect_data-defect_val,
         fld77         like zscr_defect_data-defect_val,
         fld78         like zscr_defect_data-defect_val,
         fld79         like zscr_defect_data-defect_val,
         fld80         like zscr_defect_data-defect_val,
         fld81         like zscr_defect_data-defect_val,
         fld82         like zscr_defect_data-defect_val,
         fld83         like zscr_defect_data-defect_val,
         fld84         like zscr_defect_data-defect_val,
         fld85         like zscr_defect_data-defect_val,
         fld86         like zscr_defect_data-defect_val,
         fld87         like zscr_defect_data-defect_val,
         fld88         like zscr_defect_data-defect_val,
         fld89         like zscr_defect_data-defect_val,
         fld90         like zscr_defect_data-defect_val,
         fld91         like zscr_defect_data-defect_val,
         fld92         like zscr_defect_data-defect_val,
         fld93         like zscr_defect_data-defect_val,
         fld94         like zscr_defect_data-defect_val,
         fld95         like zscr_defect_data-defect_val,
         fld96         like zscr_defect_data-defect_val,
         fld97         like zscr_defect_data-defect_val,
         fld98         like zscr_defect_data-defect_val,
         fld99         like zscr_defect_data-defect_val,
         fld100         like zscr_defect_data-defect_val,
         fld101         like zscr_defect_data-defect_val,
         fld102         like zscr_defect_data-defect_val,
         fld103         like zscr_defect_data-defect_val,
         fld104         like zscr_defect_data-defect_val,
         fld105         like zscr_defect_data-defect_val,
         fld106         like zscr_defect_data-defect_val,
         fld107         like zscr_defect_data-defect_val,
         fld108         like zscr_defect_data-defect_val,
         fld109         like zscr_defect_data-defect_val,
         fld110         like zscr_defect_data-defect_val,
         fld111         like zscr_defect_data-defect_val,
         fld112         like zscr_defect_data-defect_val,
         fld113         like zscr_defect_data-defect_val,
         fld114         like zscr_defect_data-defect_val,
         fld115         like zscr_defect_data-defect_val,
         fld116         like zscr_defect_data-defect_val,
         fld117         like zscr_defect_data-defect_val,
         fld118         like zscr_defect_data-defect_val,
         fld119         like zscr_defect_data-defect_val,
         fld120         like zscr_defect_data-defect_val,
         fld121         like zscr_defect_data-defect_val,
         fld122         like zscr_defect_data-defect_val,
         fld123         like zscr_defect_data-defect_val,
         fld124         like zscr_defect_data-defect_val,
         fld125         like zscr_defect_data-defect_val,
         fld126         like zscr_defect_data-defect_val,
         fld127         like zscr_defect_data-defect_val,
         fld128         like zscr_defect_data-defect_val,
         fld129         like zscr_defect_data-defect_val,
         fld130         like zscr_defect_data-defect_val,
         fld131         like zscr_defect_data-defect_val,
         fld132         like zscr_defect_data-defect_val,
         fld133         like zscr_defect_data-defect_val,
         fld134         like zscr_defect_data-defect_val,
         fld135         like zscr_defect_data-defect_val,
         dayst         like zscr_data_hdr-dayst,
       end of t_data.
In this fld1 to fld135 are defined in internal table.
But if the number of fields are more than 135 then the program is going to short dump.
Some times fld1 to fid170 or more fields will be there in my internal table.
Please suggest me how to make my requirement dynamic and display this data fetched into this internal table onto a .XLS file in the presentation server ?

Hi
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Max

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to delete the entries in the given field box

Hi Every One,
How can I delete the entries which I have given in example SE37 box.
When I press Backspace button the entries which I have given will appear so I want to delete these entries.
With Regards,
Venkat

Hi,
Goto ==> Customize Local Layout (Alt + F12) , then Options ====> LocalData=======> Clear History
This process should clear your history.

How to delete the data in a table using function

hi all,
i need to delete the data in a table using four parameters in a function,
the parameters are passed through shell script.
How to write the function
Thanks

>
But the only thing is that such function cannot be used in SQL.
>
Perhaps you weren't including the use of autonomous transactions?
CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
PRAGMA AUTONOMOUS_TRANSACTION;
tot_emps NUMBER;
BEGIN
SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
DELETE FROM emp3
WHERE empno = employee_id;
COMMIT;
tot_emps := tot_emps - 1;
RETURN TOT_EMPS;
END;
SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
REMOVE_EMP(7499)
              12
SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
REMOVE_EMP(7521)
              11
SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
REMOVE_EMP(7566)
              10
SQL>

How to delete the entries from the transport request

i need to delete the entries programatically from the transport request for all the entries which is exists in the package for the tables e070 and e071.

Hi,
I think you need to have authorization for that thru auth group SA.
One more thing is where ever its created like source client only you can do if u have authorization.
Regds
Sivaparvathi
Please reward points if helpful...

How to delete data from dynamic internal table

Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
Mrunal

Hi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
                           <LT_DATA> TYPE table,
                            <L_FIELD> type any.
    ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
    ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.

How to delete obsolete entries in SID table

I have an Infoobject (0PCA_ITEMNO) without master data and is used in a DSO. The sid table of the info object and its index has grown very large to about 207 gB. The DSO is periodically selectively deleted to hold the last 3 months data. How can I delete the the old and unused sid table entries to reduce the size.

Correct...you wouldn't want to delete the SID table values using custom code. This would potentially cause inconsistencies because you may inadvertently delete a SID value that is located elsewhere in your environment.
For example, if you have an InfoObject with SID value 1 for actual value of A1 and it's deleted. However, there is an InfoCube that has SID value 1 for this InfoObject in a dimension table.
To remove the values from the SID table for this InfoObject, your best bet is to use RSRV as stated before.

How to delete the entries in internal table

Similar Messages

Maybe you are looking for