How to delete the master data of a Customer created in a SALES AREA?

Hi All,
I've deleted a Customer (master data) by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
Thanks

Hi,
I dont think you can delete a customer. you can market it for deletion in XD06.
for deleting customer master data you have to setup an archiving project.
Also check the similar thread
doubt in obr2
Hope it helps you.
Regards,
Sats.

Similar Messages

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Deleting the Master Data is not possible

hai
Im loaded the Master Data .
I want to delete the Master Data. So how can i delete ??
Im trying to delete Master Data by context menu of the Master InfoObject .But im unable to delete the master data .
I heard that it is big issue.
So what can i do for deleting the master data.
pls tell me
rizwan

hai all
Thanks for quick reply .
I deleted the data from InfoCube and ODS .
Im trying to delete the master data attribute data by context menu of master infoobject . But it is says that "Not all master data can be deleted".
I looked at the help from that message .It says that i need to go SLG1 transaction and then delete like that
But i dont have authorization for that transaction(SLG1).
So plese tell me what i ahve to do for deleting the master data .
txz
rizwan

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

Open hub Services - How to extract the master data related to a object ?

Hi Gurus,
I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
Can any one tell me how to get the master data extracted in the flat file with associated info object???
Answers will be highly appreciated.
Regards,
Kironmoy Banerjee
Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PM

Hi Kironmay
Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
- Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN[] = I_T_DATA_IN[].
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
I hope this helps.
Thanks.

How to fill the master data in ecc

Hi,
0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
Regrads,
devi.

Hi Devi,
Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data.
BDC and LSMW both are used for loading data into SAP system.
Or ask even directly they can create in ECC. If it is for your testing purpose, it is better to ask them to create master in source system .
Thanks
BVR

How to Lock the master data. R/3 Conflict ESS

Dear Gurus,
Please guide me how to lock the master data for a nos of days(say 7 days).
Recently we had encountered an issue, related to ESS. While Uploading the Time data through t-code: PT60, our core team encountered a problem, that such and such employee number is locked.
While checking, they identified it, system shown error against those employees, who are accessing their ESS. We check and came to know they are accessing the master data by changing their personal record i.e. address.
Do we have any other provision to lock the master data without setting the control record to release for payroll.
Please help .

Create a custom transaction involving a custom views of table T7XSSSERSRV with the following field for each service
"V_T7XSSSERSRV-ISDISABLED"
when HR wants to lock it, the will enter this table and check this field.
this will disable the servcies in the front end.
Once the 7 days are over, HR will uncheck this field. this will re-enable the services in the froint end.
Hope this helps.

I want delete the Master data loads which i have already loaded earlier

Hi BW Guru's,
I want delete the Master data loads.
But i am unable to delete.
is there any option to delete from RSD1
Please send steps

Hi,
If that master data related ifo is present in cube u cont delete master data.
In that case u have to delete req in cube then u can delete
let me know further
*******Asgin Points if usefull***
Cheers,
Satya

Changing the "Reconciliation Account" in the master data of a Customer

Hi All,
I've to change the "Reconciliation Account" in the master data of a Customer. But this fiel has been made not modifiable.
Could anyone tell how change this?
Thanks,
Gandalf

Hi,
In SPRO, change the field status for the customer account group to optional. Then you can change the reconciliation account of the customer.
The Path -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Customer Accounts>>Master Data>> Preparations for Creating Customer Master Data>>Define Account Groups with Screen Layout (Customers). Here select the account group for the customer and double click on the line. In this screen, double click on Company code data. Then change the field status in Account management for Reconciliation account.
Hope this helps.
Thanks and Regards,
Anit

Unable to delete the Master Data

Hello Gurus--
How to delete the unused MD for an Infoobject,.
Unused MData were in A version in M,P and text tables.
Thru the program "RSDMD_DEL_PARALLELIZER" and "RSDMD_DEL_BACKGROUND" The MD hadn't got deleted.
Scheduled the above programs and checked the logs in SLG1 for both used and unused MD,.
The logs says that
a) Checked,.and I confirm that the unused MD is not present in any targets.
b) MD deletion hadn't happened for my unused MD.
--> The MD is in A version in the M,P, Text tables, if it is in M version these data can be deleted,,
Checked for the same in all the forums .
Couldn't able to find the same.
Very very Ungent sirs' !!!
Regards
Vishwa.

Infoobject --> right clikc --> maintain master data
Select rows u wanted to delete and click 'Delete' icon. And SAVE.
If system prompt u 'some master data cannot be deleted' .. continue with this message.
then goto tcode SLG1-- enter Object: RSDMD and Subobject: MD_DEL and User: ur userID and F8
In the next screen Expand node and dbl click 'Problem class additional information'
This will give u which ever objects using SIDs of this master data.
U should delete this SID according to that list.
Then U should delete particular data from DSO/Cubes.
Once data deleted from cube, then
Use Tcode RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Transaction Data -> Entries Not Used in the dimension of an InfoCube (Dbl Click)
From the right side window, expand u201CEntries Not Used in the Dimension of an InfoCubeu201D Node &
Enter InfoCube (like 0SD_C01), click u201CTransferu201D
Now, click u201CExecuteu201D (Toolbar)u2026 and the results displayed in the right side window..
Now, click u201CCorrect erroru201D (Toolbar)
Delecion of the master data

How to delete the Transaction Data in CRM

Hi Gurus,
I have a requirement to delete the Transaction Data in one Client.
But Configuration should be as it is ?
How can i over come this situation?

HI.
Do you mean refresh the client ? if that is the case, i think you are posting in wrong forum since this one is for People Centric User Interface. Try in Customer "Relationship Management (CRM) - General & Framework".
Best Regards.
Armando Rodriguez.

How To Transfer the master data from R/3 to APO System

hi this is mohamed .i m new to APO..
can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
Thanks in advance
Regards
Mohamed.

Welcome to SDN.
refer this link
creating integration model
Give ur mail id i will send the document which i have.
With regards.
Maya.

How to check the master data records in using SE16 transaction?

Hi,
Can you please help me to check the master data records using SE16 transaction?
Loaded master data for Characteristic and want to check the records in the master data tables.
Thank you for your help!
Lakshmi

Hi!
Welcome to SDN.
you have to check the master data tables.
soo in Se16 you have to select the appropriate master data table and view the data.
following thread explains about masterdata tables
MasterData table?
regards
mohan
Message was edited by:
Mohan Krishna

How to reflect the Master data changes from ECC to MDM

Hi Experts,
We need to reflect the master data changes of company code and cost center groups from ECC to MDM.
what methods available and which would be best in performance.
kindly let me know if you need further information for better undrstanding.
Thanks in anticipation
looking forward to hear from you all,
with regards,
Chandhan.S

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

How to delete the master data of a Customer created in a SALES AREA?

Similar Messages

Maybe you are looking for