How to delete the OLD PSA table altogether?
Hi,
I am in BI for NW04S and CRM4.0 sp6.0.
I created a custom data source in the source system and replicated and used transfer rule/Update rule to load an Data store object in the BI system.
However today , I needed to change some fields of the same data source, and replicated and regenerated the transfer rule, Update rule etc.
Checked the RSA3 in the source system and the data source is working fine.
However When I look into the PSA after an attempted data load, I still fine the old PSA table (/BIC/B0000893000) getting populated and not the new one ( /BIC/B0000893001).
when I look into the show data flow on the ODS i can see the PSA table name, and when I serached in SE11 for that table name I have found both these new and old table.
Although the data source is replicated in to BW system properly for some reason the OLD PSA table is still being used.
How can I correct the situation?
Thanks, will reward the points is the problem is solved.
Arun
Dear Arun,
Please check in the table (SE16) RSTSODS.
This table stores the PSA information for all the datasouces.
Enter the datasource in question followed by * in the field 'ODSNAME' (for eg. 2LIS_02_SCL*).
This will show you all PSA tables for that Datasource.
The fields DATETO and DATEFROM will tell you, which PSA table is currently in use.
By the way, a new PSA table should be generated only if there is a change in Transfer Structure.
Hope it helps.
thanks,
amol
Similar Messages
-
Please guide me how to delete the OLD claimed trip details
Hi SAP Gurus
We have corrected the all the cliams by newly created an posted properly today , how ever they are struck now and since they are form old employees (2007-2008) , few are still active / terminated/ retiree staus cant delete them nor make it zero. But appear in our report as pending...
Please guide me how to delete the old trips.. your support really appreciated..
Thanks
ShanHi Shan,
As per my knowledge, no table should be deleted. Check the below link for more info.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/73/6bf037f1d6b302e10000009b38f889/frameset.htm
<<removed>>
Thanks,
Praisty
Edited by: Matt on Jul 26, 2011 3:11 PM -
Reg:How to delete the column in table control also from database table.
Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab. -
How to delete the old code in the EXIT_SAPLRSAP_001
Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
NarendraHi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja -
How to delete the old schedule line release?
Hello,
How to delete the old schedule line release in apo?
Generally GR has to be carry out schedule line release in r/3 which reduces the Schdule line release.
But i do want do GR against old schdule line release instead i want to delete the old schdule line release.
Please suggest.
Regards,
Sunil PatilSunil ,
/sapapo/cmds_del is the tcode to deleted sales scheduling agreement confirmations and releases
/sapapo/display_conf is the tcode for displaying sls. sch.agr confirmations and releases
The above two are in the supply chain collaboration menu
/sappao/cmds_sc02 is the tcode to delete sales scheduling agreements . This tcode is in the application specific master data menu
Thanks
Saradha -
How to delete the old schedule line release in apo
How to delete the old schedule line release (from current date) in apo which is having schedule firmed?
Please suugest.
SunilHow is it possible to delete old purchasing schedule lines in APO (that do not exist in R/3)?
Though used successfully before, /SAPAPO/CCR will not reconcile our discrepancy in this case.
Thanks in advance,
Jim -
Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it
Hi Caveman337,
Welcome to the Support Communities! The resource below will explain how to delete an old iTunes backup. Before you do this, I would suggest creating an iCloud backup of your iPhone.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
http://support.apple.com/en-us/HT203977
Back up using iCloud
If you're using iCloud, it can automatically back up your content. Use these steps to turn on iCloud Backup:
Tap Settings > iCloud > Backup. If you're using iOS 7 or earlier, tap Settings > iCloud > Storage & Backup.
Tap iCloud Backup to turn it on.
Tap Back Up Now.
After you turn on iCloud Backup, iCloud will back up your content automatically. You can return to this screen to see when the last back up happened.
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
http://support.apple.com/en-us/ht4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Delete a backup
If you want to delete a backup created by iTunes:
Open iTunes Preferences:
Mac: Choose iTunes > Preferences.
Windows: Choose Edit > Preferences. Learn how to turn on menus in Windows 7 and 8.
Click Devices. (The iOS device doesn't need to be connected.)
iTunes will show the phone number, International Mobile Equipment Identity (IMEI) number, and serial number of the backed up iPhone when you position your mouse pointer over a backup. (Only the serial number will be shown for iPad and iPod touch). You can use this to find the backup you want to delete.
Select the backup you want to remove.
Click Delete Backup.
When prompted, confirm that you want to remove the selected backup by clicking Delete Backup.
Click OK to close the iTunes Preferences Window.
Backups that have a date and time stamp in the backup name are copies of backups created by restoring the iOS device. The date and time in the left column are when the restore-from-backup occurred. The date and time in the right column are the last synced date; this shows how current the data is.
I hope this information helps ....
- Judy -
I have changed my Apple ID in my iPhone 4S and iPad, but when I update my Adds on them, they prompt me to enter the old Apple ID and password. I have already created the new Apple ID. How can I delete the old Apple ID on them?
If you created a new id instead of updating the old one then any apps etc that you bought/downloaded with the old id will still be tied to that old id, and they can't be copied or transferred to a new one - so only that old id can download updates to its apps.
If you updated the old id then try logging out of the account on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. -
How to delete the old ones?
While struggling to clean up my system, and from an abundance of caution, I have created a lot of Catalog Saves, Backups, and Restores. Now I am concerned about how to clean these up, without scrambling something else up in PSE. I have searched all the help files that I am aware of. Can someone please tell me where to look for guidance, or tell me how? Can I simply delete the old, out-of-date ones; or is there a formal "within-PSE" file management control that I need to follow? I'm still on PSE4.0. Thank you very much for any guidance.
Do you mean the trashed documents are still showing up in the Recent Files list:
If so, that's normal behaviour. The highlighted file was placed in the trash immediately before I opened this menu and took the screen shot.
Placing a file in the Trash does NOT delete the file from your hard drive. Here's a shot of the same menu, this one taken after Emptying the Trash (Finder menu, in the Finder).
The BB file no longer appears in the menu, but even now, it's not actually deleted from the hard drive.
Empty the Trash does nothing to the actual file. It does delete (or re-write) the directory entry pointing to that file's location on the disk, and marks the space as 'available.' The file information remains on the disk until it is overwritten by other files as the Mac OS makes use of the available space.
If you want to actually 'remove' the file, use Secure Empty Trash. Using this command results in the actual file information being repeatedly overwritten (with 1s, 0s, or a random series of these two states). Usually unnecessary, and much more time consuming that simply removing the directory entry and making the space available.
Regards,
Barry -
How to delete the old backup in time machine?
Hi all,
As I have use the TM for a year,the backup folder is on a network dirve. HOw can I delete the old backup (eg 6 months ago) in order to release more space?
Thank you
GaryHi, and welcome to the forums.
I'll assume you mean a NAS (Network Attached Storage) device, not a Time Capsule or external HD connected to a Time Capsule or other Mac on your network.
If so, you can delete individual backups via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum). That may not seem to gain any space, since the backups are in a rather odd container called a +sparse bundle.+ It won't shrink automatically when you delete things, but the space will be reused for new backups.
You may be able to limit the size of the backups by limiting the amount of space available to Time Machine on the NAS, but you'll have to use whatever facilities the NAS supplies, not OSX. Some allow the disk to be partitioned as on a normal disk, or allocate space to shares. -
I have two Firefox versions on my laptop. One is 3.6.10 I believe and the other is some other version of 3.6. Why didn't it disappear when I downloaded one of your requests to update? Now I don't know how to delete the other one or even which one is the oldest?
If you mean that you see both version listed in Control Panel > Add and Remove Programs then you most likely only have the version with the highest number installed. You posted with a Firefox 3.6.6 user agent. It can happen that the updater didn't remove or updated the registry keys properly and left the old keys.
-
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to delete the record in Table
Hi Guru's,
i have Table which contain no.of Records.
i want to deleted one record. if i go to Table maint.Generator....from table itself..
how to do that... when we deleting the record. can we create new TR for that?
can anybody tell me.
Thanks in Advance,
venkatHi,
it is answered, here for my table there is no Table Maint.Generator.
i just explained how i have done it.
i just simply gone into Debug mode. there
code = Dele.
i have given. then i came out from debug mode to Table. there i just got Delete button on application tool bar.
i selected the record then icliked on Delete button.
it is got deleted.
But it is not asking for any new Transport Request.
Regards,
Venkat -
Changing my apple ID...how to delete the old one from my ipad
I can't seem to clear the old email address in my app screen so I can log in .It is fine everywhere else. Like signing here. How do I clear that old ID from my ipAd so I can download and app. Do I need to reset or delete something on the iPad itself?
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/bfd9b62e01d5768ab80 685ac65504ab5.jpg
-
*How to Delete the Old Forecast Versions from Cube & DSO? *
Hi BI Gurus,
I am currently designing my BI Model to deliver the APO DP requirements.
It would be great if some one can give me an Idea how to achieve the below:
We have a requirement that needs to me maintained the Data as Versions.
1. We are extracting the Data form APO DP planning area and maintaining the Versions based on the Forecast Version in BI. The Forecast Version in BI will hold the Versions in Calmonth format (MMYYYY).
2. Load frequency-- Monthly load for (36 months worth of forecast data)
3. Need to maintain 12 Versions and once we reach the 13th Version (13th load) then we need to delete the 1st Version
4. Data Flow details:
Export DataSource(PSA)> W.O-DSO->CUBE
Your help will be much appreciated.
Thanks in advance
Group BIHi Shanthi,
Thanks very much for your reply. But I am not able to understand your reply.
My Requirement is: We load monthly once to Standard DSO and Cube form WO DSO.
|---> Standard DSO
WO-DSO-|
|---> Standard CUBE
We generate the Forecast Version based on the System Date (we take Month to Forecast Version Object).
Example: We started loading form March-2008. We loaded 12 Versions by Feb-2009. When we do the next load which is 13th load, we want to delete the data we loaded on March-2008 from both DSO and CUBE.
Hope this is more clear now.
Once again thanks very much for your help.
Regards,
Group BI
Maybe you are looking for
-
How do I find out that Overflow is being used
We have configured Overflow for one of our Caches using bdb. I have a few questions with regard to the overflow scheme 1. How do I test that Overflow is being used indeed ? 2. Where does bdb store its data, is it on the file system or in memory ? Is
-
Hook up wireless connection to macbook pro?
i hook up the wifi to my hp laptop and my phones too. But it wont hook up to my macbook pro
-
Hey Everyone - Looking to network my MACBOOK Pro to Windows 7
Can someone give me advice? I have no idea how to begin. Am using a Windows 7 and am hoping its similar to Vista. Both Mac and PC are connected to router. ROUTER"Wireless PRINTER = connected via ETHERNET Macbook Pro = Airport PC=Ethernet Need to make
-
Scrollable Frame (Swing Newbie)
Hi, new to Swing programming and getting stuck with making a scrollable window. This was my original code which works (the base class extends Canvas so when I used panel.add(this) it is adding a Canvas: public Game() { // create a frame to
-
When attempting synch iTunes photos tab yields spinning ball.
When synching my iPhone or iPad a spinning wheel appears when on the photos tab in iTunes. In other words, I cannot select photos to transfer from my iMac to my iPad or iPhone. The spinning wheel never goes away while on the photos tab. Other tabs