How to delete the payroll result by batch? have any program to do this?

Hi，
how to delete the payroll result by batch? have any program to do this?

With standard payroll deletion (PU01), SAP  will not allow payroll results to be deleted if it already reaches certain steps of payroll process (e.g. Pre-DME, DME); instead, you would have to do payroll a void or payroll reversal. This utility doens't check for that, and only delete payroll results based on the criteria given. This therefore could cause inconsistency in production if your payroll process already surpasses certain steps.
Rgds.

Similar Messages

  • Dear All, thanks in advance i have one doubt please clarify this  what it is can we delete the payroll result in production client .yes we can delete the payroll result by PU01 Tcode .But my question is

    what are the scenarios we delete the payroll results ,can we suggest the client to delete the payroll result.

    Hi,
    I would not recommend that you delete the payroll results. What is your issue? Can you provide more background, there may be other options...
    Will

  • I am trying to download an album from ITUNES and I keep getting a "session has timed out" message with no further option but to try again. I get the same results. Anyone have any ideas?

    I am trying to download and album off ITUNES but when I get to the billing site and attempt to purchase it, it gives me a message saying "Your Session has timed out." It gives me no other option that to try again and I just keep getting the same results. Anyone have any ideas on what I can do?

    Hi, Kenny. 
    Thank you for visiting Apple Support Communities. 
    There are a couple things that I would recommend trying.  Try closing all open applications and power cycle the device.  Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below.  If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in.  Be sure to test downloading an application after each step. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Cheers,
    Jason H. 

  • Delete the Payroll Result

    Hi,
    When i want to delete the Payroll Through PU01 transaction, it is showing below given message -
    Deletion forbidden! Result was posted with posting run 0000004008 (run type PP)
    Message no. 3G801
    Diagnosis
    The payroll result cannot be deleted because it has already been posted with posting run 0000004008 for run type PP.
    How can i delete the same
    Regards..

    Goto PCP0 -> Edit -> Filter -> Delete Filter.
    After this you will be able to see run 0000003973.
    Thanks dear..
    After find this number..i reverse this.
    After that i run the payroll again and see in form 16. Some changes are there like Notice pay not showing there. Basic salary has been modified. etc..
    My Main problem was: - Notice Pay is not deducting it's amount from Gross Emoluments.
    But after that Notice pay row is not appearing.. and also some modifications have been made in other values..

  • How to delete the value assignment in batches?

    Hi guys,
    How is it going?
    We want to delete one assigned value ( for example: the value " powder " in "state of matter " of " physical / chemical data ") in property tree for thousands of REAL_SUBs.
    But to my knowledge, I only know the way to delete them one by one. How can I delete them in batches?
    Thanks,
    Li

    Hello
    the option of the EasyExpert is a nice option (you need to my knowledge an installed expert server in using the easy expert; therefore customizing must be performed, RFC connection etc.).
    In any case there could be a further topic there you could get some "trouble" in some sense. If you exchange by mass the phrase in "state of matter" you can only change the phrase (according to my knowlegde of the easy expert) but nothing else. If you switch from e.g. solid to liquid this is in my opion one of those topics which could be WWI report "critical" (normally it is DG critical too).  Such a change is normally a legal change that means if use the property "State of matter" in MSDS generation then normally most legislations would say: this is a legal change. Therefore you need to "flag" this as "relevant" (standard EH&S process) so that you get the change mark in MSDS. The Easy Expert can not perform this to my knowledge. It can only change the phrase.
    May be you need to consider this behaviour too.
    With best regards
    C.B.
    PS: In your case you will have no problem because you delete something but the topic will come up if you would like to "exchange" something. And I would assume that if you have deleted the "state of matter" you would like to populate the same property again. If you need the "relevancy indicator" one option would be to generate a load file using the standard EH&S approach
    Edited by: Christoph Bergemann on Apr 24, 2010 1:41 PM
    Edited by: Christoph Bergemann on Apr 24, 2010 1:43 PM
    Edited by: Christoph Bergemann on Apr 24, 2010 1:44 PM
    Edited by: Christoph Bergemann on Apr 24, 2010 1:44 PM
    Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM
    Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM
    Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM

  • How to delete the all records in Ztable from report program

    Hi Guys,
    Good Day!
    How to delete all records in Ztable from report program(Means I want to clean Ztable records from report program) .  Please send me the code.
    Thanks & Regards,
    Reddy

    Use this.
    DELETE { {FROM target [WHERE sql_cond]}
           | {target FROM source} }.
    *But before deleting the rows please check if this Ztable is being used in any other programs or used by others.
    Check "where-used-list"
    in se11 give the table name
    utilities- where-used list.
    I hope this helps.
    thanks.

  • Deleting transferred payroll result

    Hi Gurus,
    I run the bank transfers through DME. But now management want some changes from back date.
    so I am trying to delete payroll result. but error message displays, that result alredy transferred.
    I not posted result to FI, but done the DME-document generated for the same.
    So, anybody can tell me how to delete the payroll result which has been transferred by DME.
    Thanks in advance
    Sandeep

    Hi Sandeep,
    When you say back dated changes, do you mean you will be changing the master data which will affect employees pay? If this is the case, then I think you can make the changes and run the payroll again without having to delete the payroll results. The system will consider the payments that have already been transferred and will transfer the remaining amount.
    I am not sure why you decided to delete the results but if it is because of the scenario above, then I don't think you need to delete the results.
    Akshay.

  • Off cycle posting reversal and deletion of payroll results

    Hi Experts, We have an scenario employee was locked for payroll for past 4 periods in IT0003. Their was an off-cycle payment to employee and posted to accounting  ( when employee regular payroll was locked). Now  their is a requirement to reverse the posting of off-cycle payment as off cycle payment is not required. After the reversal of posting of off-cycle payment. Do we have to delete the payroll results of off-cycle through PU01 before running the current month payroll for the employee.Now the employee is regular payroll it will trigger retro for past 4 periods. Please advise. Regards, IFF

    Hi I FF,
    if you don't want that off-cycle amounts to be added in the employee gross must and should delete the payroll run after reversing the FI posting.

  • Bulk deleting of payroll results in production

    Dear all,
    I have run payroll for all employees into production as per client request, but now they want to delete all payroll results and again by maintaining few more details of employees they want to run payroll for all.
    Kindly tell me what tcode or program i can use to do this, as I already tried few tcodes like RPUDEL20, RH_DELETE_STORED_PAYROLL_RSLTS & HR_DELETE_LEGACY_DATA_PAYROLL to delete records, but all these are not existing into the DEV, QUA, PRD.
    Please suggest me some valuable solutions.
    Thanks & regards,
    N Verma

    Hi Verma,
    PU01 is always better to Delete the payresults in the Production system.
    If employees are huge in number,you have to go with BDC for PU01 tcode.
    If employees  are small  in number we can use PU01 for each employee to delete the payroll results.
    There would not be any negative effects by using PU01.
    Regards,
    Vsai.

  • How to delete the data from SAP R/3 DB table from BW

    Hi,
       I am facing an issue... I have populated the data into custom r/3 DB table by running a user exit.I am getting the data and loading(Full Load) it in BW ODS. But my problem is when i rerun the user exit it is giving me a short dump saying "SAPSQL_ARRAY_INSERT_DUPREC". when i delete the enteries of DB table it is working fine. But this fine in development.but i production i cannot do this.So i want to delete the DB table enteries by an ABAP program and call this ABAP program using Process chain when my ODS data LOAD is successful. How to go About this.
    P.S: I want only to delete the DB table enteries not the DB table.....
    Thanks and Regards
    Sairam phani

    Sairam,
    why don't you just add the code for deletion of records into that user exit, so it would first delete entries and then write new ones.
    Alternatively, you could use a Process Chain to trigger an event in R/3, and by that event a scheduled job would run, deleting entries from that table.
    As I don't know details of the solution you're implementing, that's all I can think of now.
    Cheers,
    /RB

  • How to aggregate the PO history in batch

    How to aggregate the PO history in batch? thanks !

    I know this transaction,but it can't select all items to aggregate,i must select one item and aggregate, so it is not very convenient,so i write a program to batch process it
    Thansk!

  • Delete every payroll results in the system

    Hi experts,
    There is a special Test system where External useres can login to the system, so we'd like to delete every paroll results in the system.
    My question is how can I do that * correctly & efficiently*?
    I know that there is a report for that:  "RPUDEL20"  but imagine a company with 14.000 employees. So using the logical databse, and deleteing the paroll results ony-by-one, will took more than a day
    My idea is to delete every record in the tables:
    HRPY_RGDIR
    HRPY_WPBP
    HRPY_GROUPING
    P01O_ZVB_RR
    This is definetelly the fastest way, but is a good solution?
    I mean what about the 0003 infotype (payroll status)  and other relations to the payroll results? What will happen if I delete the tables?
    There is no payroll testing in this system, we're using this system for  ESS testing, so the payroll results are not relevant, but all other masterdata (PA and PD infotypes) are relevant.
    I'm happy to hear any idea
    Bye
    N.

    Hi everyone,
    Thank you for the answers,  but I don't understand how can the LSMW help me. As I know the LSMW is a data migration tool. I don't want to import anything to the sap system, I just want to delete the existing payroll results. How does the LSMW help me in this?
    Thanks
    N.

  • How to delete the Time Evaluation Result in the CLSTB2

    Hello,
    does anyone know how to delete the time evaluation result in the CLSTB2?
    thanks.

    Hi Ling,
    SE38
    program RPUP2D00
    Relation Id is B2
    in sort field give pernr
    tick the check box of delete.
    password is your id (ex : saphcm)
    Regards,
    Harsha

  • ECC 6.0 with PU01 (Delete Current payroll result)

    Hi,
    We are going to SAP 4.7 to ECC 6.0. We are facing in problem PU01 (delete current payroll result).
    we have made a BDC for deleting payroll in mass. In ECC 6.0 output screen is changed, so my BDC is not
    working. In ECC 6.0,  PU01 when I directly run, it is correct. But I am going with SHDB TCode (for recording) Delete button
    is not working (Give SAP 4.7 version screen with SHDB). I can't delete payroll result. how can I record it?
    Plese help.
    Thanks & Regards
    Neelesh Sonkar

    HI
    While searching the forum I cam accross the following thead.
    Re: Unable to record transaction PU01 in ECC6 HR
    Hope this helps
    Param

  • Deleting existing payroll results.

    can we delete the existing fields in standard Infotypes.
    and how can we delete existing payroll results from RT and CRT. please give the procedure.
    how can we identify an employee termination date? using infotype(41) i 'mean which field.
    and tell the procedure.
    if possible please provide  the fields of infotypes to my id [email protected]
    Thanks in advance.

    Hi Vamsi,
    If you want to Code the syntax then this might help you
    DATA:  loeschkey LIKE pcl2-srtfd.
    * loeschkey  contains Pernr and the sequence number of the Payroll Result.
    * This statement can be used with a loop to delete the result if multipal records
    * have to be deleted.
    DELETE FROM pcl2 CLIENT SPECIFIED
                        WHERE relid  = " ID of the Cluster .... it is country specific
                        AND      client = sy-mandt " Client Number
                        AND      srtfd   = loeschkey. "
    There are also standard reports available for deleting single or multiple payroll results.
    Have a look at this <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/profile?userid=1894412">tread</a>
    ~Bhawanidutt.
    PS: Close the thread and reward points if solved.

Maybe you are looking for