How to delete the previous request in Cube ?

Hi All
I have 2 sources loaded to Cube..
Ex:
ODS A --> Cube 1
ODS B --> Cube 1
Today they 31.10.2011 for both in CUBE1
so it becomes...
ODS A --> Cube 1 --> 31.10.2011
ODS B --> Cube 1 --> 31.10.2011
tomorrow they load... CUBE 1 shld be..
ODS A --> Cube 1 > 31.10.2011--
DELETED
So finally my cube has only following requests..
ODS B --> Cube 1 --> 31.10.2011
ODS A --> Cube 1 --> 01.11.2011
ODS B --> Cube 1 --> 01.11.2011
ODS A request which is older than 1day must be deleted before loading the next day...
Can I use DELETE OVERLAPPING requests for this requirement? I am not too sure...what are the steps to be created..?
as I tried but it was not successful.
can anyone help me with IDEAS or steps??
thanks a lot

yes, you are right. You should use Delete overlapping request option.
If it is not working, please let us know what option did you select for overlapping request deletion, may be you missed something there because overlapping request deletion is the best fit for your requirement.
One thing you need to make sure that loads on both the days are done through PC only.
If you do a manual load on 31.10.2011 and then PC loads data on 01.11.11, overlapping request deletion step will not delete the request loaded manually on 31st but if loads are done throught PC only, there should not be a problem.
Regards,
Gaurav

Similar Messages

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

Can i delete the Previous request and create the new request for loading

Dear Experts,
I use 0FIGL_V40.Cube in my system. These Cube does not contain delta capability.i mean for every time i wil load Full only.
Here my question is the first day load full load,and second day i want to load the data.But can i delete the previous request and load the data with new request.
Please guide me .
Regards,
Srinivasan.

Hi Srinivasan,
I hope the DS itself is not Delta enabled. If so i think you can delete the contents of PSA. This step can be added in the Process chain before actually loading the FULL IP to DS. Then you can include a step to "Delete Entire data from DataTarget" step in the process chain before actually loading the DTP(Can be Delta/FULL. I dont think there is any impact here since both will bring only one request from DS to DataTarget since PSA will have only one request) from DS to Cube.
Hope it helps!
Regards,
Pavan

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

How to delete perviously loaded request from cube

Hi All,
I am loading a standard cube from r3 w/o PSA through DTP.
1 ) how to delete data automatically from cube w/o using Process chains.( previously we have a facility in Infopackage to delete old loaded data ) .In BI7 how to delete the same automatically.
2) How to schedule the DTP to run on daily basis( w/o process chain ) .I am not able to schedule it via RSRDA ?
What might be the reason ?
Regards
KK

Chivukula,
I'm curious as to why you aren't using the process chains. There's now a "delete overlapping request" process type within rspc.
You are right thought, the DTP does not offer a facility to delete out the old loaded data. This feature is not in BI 7.0
As for scheduling a DTP to run daily, there's no way I know of to run it daily without rspc. Yes I understand that rspc could get very messy but just create a separate holding area, say DAILY DTPS and put your DTP's in there.
Cheers,
Pom

DTP to Open Hub - How to delete failed previous request?

I have instituted the use of an open hub destination to export data to a csv file using a process chain.
Occasionally, the attempt fails and subsequent runs of the process chain also fail because the previous attempt is "red".
Is there any way to specifically delete the failed request from within the process chain?
The error message speaks of setting the "Automatically Repeat Red Requests in Process Chains" indicator, but I have not found it!
I will award points to helpful solutions.
Thank you in advance.
Andy

Thanks YJV.
But what I am asking is how to embed this in a process chain so that each time it runs, it first deletes all previous requests. There is such a command for regular DTP's but not for the ones that export to open hub. At least they do not appear in the F4 list when trying to generate this command in the process chain.
Therefore, I am still looking for either the mentioned indicator which can be set for (all) DTP's or for a way to delete all related requests from within a process chain.
Andy

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

How to delete the spool request number

HI Masters,
            My program creates a spool request. And i want to delete that spool request number? How to delete that??
              Thanks in advance.

hi
good
The program are RSPO0041 or RSPO1041.
This is handy whenever you encounter a user who managed to create a lot of spool requests which are choking your system.
Deleting them with SP01 will be too slow and you will get time out if it exceed the online time limit specify by your basis people.
<b><REMOVED BY MODERATOR></b>
thanks
mrutyun^
Message was edited by:
        Alvaro Tejada Galindo

How to delete the Previous Recipients list in iPhone 3G Mail

I would like to delete the list of previous recipients in my iPhone 3G Mail so that when I search it only shows addresses in my Contacts, not every single random address I may have used.
I know how to do this in Mail on my desktop, and I tried the option of replacing the Mail info on the iPhone with the info from the desktop, but it didn't work.
Anyone knows how to do this?

sanjinzvonic,
In my expeirence, the only way to do this is to restore your iPhone, setting it up as a new phone. You can try resetting all settings prior to this to see if that does it as well.
To reset all settings, navigate to Settings > General > Reset.
Backing Up, updating, and restoring your iPhone and iPod touch software
http://support.apple.com/kb/HT1414
Hope this helps,
Raleigh

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

How to delete aggreagetd data in a cube without deleting the Aggregates?

Hi Experts,
How to delete aggreagetd data in a cube without deleting the Aggregates?
Regards
Alok Kashyap

Hi,
You can deactivate the aggregate. The data will be deleted but structure will remain.
If you switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. Switching off the aggreagte won't delete any data,but temporarly the aggregate will not be availbale as if it is not built on the info cube. No reporting is not possible on swtiched off aggregates. The definition of the aggregate is not deleted.
You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.This aggregate will be having data from the previous load's. If the aggregate is switched off means it wont be available for reporting but data can be rolled up into it.
If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
Later when you need those aggregate once again you have to create it from scratch.
Hope this helps.
Thanks,
JituK

How to delete the previous request in Cube ?

Similar Messages

Maybe you are looking for