How to delete the queries and WAD templates from the SAP BI

HI,
We had a task to delete the list of quires and WAD templates from the SAP BI landscape(development,quality and production servers)
Please suggest the process to follow for removing the quires from the SAP BI landscape.

Hi Venkata,
I assume that the DEV-QA -PRD are in Sync with each other.
When you are deleting a query from the DEV,it should ask for a NEW transport request.IF not it means it is collected in some other request ,may be in NA or in Junk request.So see to it that it is FIRST saved in your request and then using RSZDELETE T .Code you can delete it.When you transport the request to QA or to PRD ,the query automatically gets deleted from that landscape.
Let me know if there are any issues.
Rgds
SVU123

Similar Messages

When I try to sync photos, I followed all the steps, picked one folder. When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad. What have I done wrong

When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - Pat

I have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks

I have 2 Macs - an iMac that holds my entire iPhoto library and a Mac Book Pro that I use to hold a subset of the main library - how can I transfer photos and their metadata from the main library of the iMac to my Mac Book?

I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?

Link the two Macs together and use iPhoto Library Manager
Regards
TD

HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465)

Upgrading iLife from 04 to 08 and want Templates from the older versions

I am upgrading Ilife 04 to 08. I want to make sure that I first keep all of the templates from the previous versions including the ones between 04 and 08. Are all old templates included with 08? If not how can I get them? i only have a disc copy of 04 and 08. 03 and older were already on my system.

The old iDVD templates are included as an option in the iLife '08 install. After you accept the EULA at the beginning of the installation, choose to Customise your install. Tick the box for the earlier themes under the iDVD dropdown.

I have downloaded an app which I think is to large to my IPAD as it has read loading for hours now. How do I stop it and clear it from the pad. I have tried the normal holding down the icon but nothing happens?

I have downloaded an app which I think is to large as it has jammed. The icon just reads loading. How can I stop it and clear it from my pad????

Have you tried a reset to see if it resumes after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4528 im trying to find out how u delete a song that u added from the itunes radio...from iphone???

i am trying to find out how u delete a song that u added from itunes radio....from iphone????

HI nhenson04,
If you are looking to delete downloaded content on your iPhone, you may find the following article helpful:
Apple Support: How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Regards,
- Brenden

HT1386 I copied my my iTunes music from an old computer to a Macbook Pro, but it did not copy the playlists on my nano. How can I transfer the playlists and their content from the nano to the Macbook

I copied my iTunes music from an old computer to a new Macbook pro but it did not copy the playlists that are on my Nano. How can I copy the playlists and their content on the nano to the Macbook? If I automatically sync the nano from the Macbook, will it scrub the content and existing playlists on the nano?

You need a third-party program like one of those discussed here:
https://discussions.apple.com/message/2901170#2901170

HT1668 I cannot remove the draft write mail template from the mail application screen. Save draft works but cancel does not remove the draft template. I can send email using the template but it remains on screen preventing me from accessing any mail

Still can't get rid of the template page

I am not at all sure about what you are calling a draft email template. I have never seen one in the mail app and unless this is something that you created in Pages or some other word processing program I don't know what template you are describing.
Anyway, this may work. Quit the mail app and them go back and see if the draft is still on the screen.
Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Or try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons

How to delete the rollup and compress request from the cube

Hi Experts,
I have a requirement, one request was updated into the cube and it was been rollup and then compressed. As the request was compressed so based on request id we cant perform the deletion.
So it is possible with selective deletion. Now before performing the selective deletion do i need to deactivate the aggregates.
Help me out on this.
Regards
Prasad

Hi.........
U hav to deactivate the aggregates................bcoz.........Selective deletion is only possible with uncompressed requests...............ie from F fact table...........after compression data moves from F fact table to E fact table.............. you can't do selective deletion on E fact table.........So first deactivate the aggregates............then do the selective deletion..............then again activate the aggregates..............and do the aggregate filling job manually in RSA1..............but I will suggest u delete the request...............bcoz any how u hav to deactivate the aggregates............and in case of selective deletion u hav to be very particular................if ur load is not taking much time............then delete the request and repeat the load............
Regards,
Debjani...........

How to Delete file i.e. videos directly from the Playbook

I know that I can transfer files to the playbook, but How do I delete flies such as videos from the playbook?

To delete a a video open the videos app and swipe down. Click on the pencil for "Edit". Select the videos you want to delete and then click on the delete icon. Pictures works the same way.

How to delete all projects and accompanied files from Adobe Premeiere Elements 13

I would like to delete all projects and files and start anew, but I cannot find a clear enough instruction how to do it. Please help'

vitprod
Same other versions as well.
There is no one delete button that wipes away the project file (.prel) and the project's assets. You need to go to the save locations of the project file (.prel) and its assets and delete
each one by one wherever they are saved UNLESS you pre-plan and, before the project is created, set up a particular project so that the project file with assets goes to its own folder instead of each component of the project going into a common place for Premiere Elements files and folder where you have to pick out the materials for deletion one by one by name.
Answers
Default type situation
If left at defaults and if your Premiere Elements 13 is running on Windows 7, 8, or 8.1 64 bit, go to Libraries/Documents/Adobe/Premiere Elements/13.0 and, in the 13.0 Folder, delete standalone files with your target project's name and delete files with your target project's name in the folders found in the 13.0 Folder.
Plan Ahead
Edit Menu/Preference/Scratch Disks - Set all to Same As Project.
Create a new folder at a hard drive location of choice.Then point the project file to that folder for the Save In.
Tip: When the Expert workspace of the new project opens, go to File Menu/Save As. Name the project and set the new folder created as the Save In of the Save Project dialog.
Please review and consider and then let us know if any of that worked for you.
Thanks.
ATR

How to delete other files(yellow color code) from the hard drive, how to delete other files from the hard drive

how can i delete the yellow color code items from my hard drive? What are these other files anyway? I wanna save some memory space from my storage.

Macbook Pro community is here
Following thread could solve your question.
https://discussions.apple.com/message/19030300#19030300

How create plugins in java and access then from the app

How can I create plugins for a Java app. And how do I need in my app to access those plugins??

Generally speaking, any sort of plugin is simply an implementation of some defined or set of defined interfaces that is loaded at runtime and invoked based on some event, configuration or other such mechanism. Java plugins can be implemented simply as .jar or individual classes that implement the interface(s). The application loads these (perhaps using separate, specifically defined class loaders) and is responsible for knowing how and when to invoke their method(s).
The trick, of course, is defining the interfaces to be supported by the app and implemented by the plugin and to define a set of events, etc. that would cause these to be invoked. The mechanics of loading the classes, instatiating the instances as need, etc. is fairly basic Java programming.
Chuck

How do I generate PDF and CHM files from the a command line in windows?

I am trying to set up a PC to build some documents during the night. I was looking for a way to get framemaker to generate PDF and CHM files via a command line in windows? How is this done with FrameMaker 12
Thanks for the help
Alex

Hi,
The part with generate a PDF via a jsx seems to work OK, except when FrameMaker decides that it will not work anymore. I must say I am not impressed with the stabillity of FrameMaker 12, there is room for a lot of improvement!.
I have given up on how to figure out how to get FrameMaker 12 to generate chm files via jsx scripts, any pointes are still very welcome.
The route I have taken is I make a RoboHelp project for each chm files I need to generate. The only thing this RoboHelp project contains is a link to the actual FrameMaker project I want to generate a chm file.
To make the chm I start RoboHelp with a script that
1) Opens the desired project
2) Sets the desired output chm files name
3) Generates the chm file
4) And finally quits RoboHelp
Below is a copy of the jsx in case anyone can reuse anything. And yes parameters are transfered via enviroments variable. I have later learned there is some way to read the parameters given at a command line but this seems to work so I stick to this for now.
// Get parameters
var RhProjName = $.getenv("RH_PROJ_NAME");
var RhChmName = $.getenv("RH_CHM_NAME");
var RhLogFileName = $.getenv("RH_LOGFILE_NAME");
var RhLogFile = new File(RhLogFileName);
RhLogFile.open("w", "TEXT");
RhLogFile.writeln("RH_PROJ_NAME : ", RhProjName);
RhLogFile.writeln("RH_CHM_NAME : ", RhChmName);
doc = RoboHelp.openProject (RhProjName, 1);
var sslmngr = RoboHelp.project.SSLManager;
for(var i = 1; i<=sslmngr.count; i++){
var ssl = sslmngr.item(i);
if(ssl.name == 'Microsoft HTML Help') {
    // Set the output location and file name
    ssl.setSpecificProperty("DestinationProjectName", RhChmName);
    if (doc.saveAll(true) ) {
      RhLogFile.writeln("saveAll returned TRUE");
    } else {
      RhLogFile.writeln("saveAll returned FALSE");
    if ( ssl.generate() ) {
      RhLogFile.writeln("ssl.generate returned TRUE");
    } else {
      RhLogFile.writeln("ssl.generate returned FALSE");
} else {
    // alert ("Found " + ssl.name + " dont do anything");
doc.saveAll(true);
RhLogFile.close();
RoboHelp.closeProject();
RoboHelp.quit();

How to delete the queries and WAD templates from the SAP BI

Similar Messages

Maybe you are looking for