How to delete the request in se10

Hi Experts,
How to delete the request in se10 ....plz explain
Regards
Venkat

Hi,
Go to SE10,select the request which you wnat to delete.You will find a delete icon on the top.Select it.
This will delete the request.
Make sure that this request is the one which is under ur ID.If you want to delete the request which is under other ID,it wont allow to delete.
Thanks & Regards,
Suchitra.V

Similar Messages

  • How to delete the Request Number

    Hi all,
                 How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

    For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
    You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
    Regards

  • URGENT: How to delete the request in version management

    Hi,
    Please let me know how to delete a request in version management whcih is not released yet.
    I have released a request to quality server for an object. After that I was asked to make some changes to that object as there are some defects.
    So, i have created a new request and proceeded with the changes. Under that request I have made some changes and activated. but the result is worthless. So, I want to get the result of the object which i have released. i.e. i want to get back only the released request changes.

    Hi,
    yeah............goto version management......first ull hav ur new request......
    below that ull have ur previous request right.............
    check the check box of ur previous request.............
    and click retrine button.......all changes made in ur latest request ll be retrived back to its previous version.........
    come back activete it.............in ur program ull not find ur new useless changes........release it...........
    Cheers,
    jose.........

  • How to delete the request in Direct Update DSO

    Dear Gurus,
    I have a situation where I have an invalid characteristic loaded into the Direct update DSO.  This is related to Spend Performance Management.  This DSO is loaded through a data source with the option Without Archive.  So, I cant see any request in this DSO.   This DSO will then supply data to another DSO which is standard DSO. 
    The data Activation job in the standard DSO is failing. 
    My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO.  I have already repaired the data in PSA.
    Your Kind help is greatly appreciated.
    -Mohan Kumar

    You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see  request number under the manage tab for direct update dso for any load.
    Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's  and previous data will get deleted automatically
    Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

  • How to delete the requests in DTP?

    hi all,
    here i am unable to delete the requests in DTP...
    when i am going to delete the request in DTP it simply showing the error:
    *cannot lock request DTPR_488BDVJVHQPUUTT3R383DJ55Q OF TABLE 0MATERIAL for deletion*
    could you plz help me on this.....

    Hi Kiran,
    Please go through this thread. Here the same problem has been discussed it detail.
    /message/4419400#4419400 [original link is broken]
    Following are the steps mentioned in this thread
    1. RSA1 -->Info provider >0Material>Right Click-->Display
    2. One screen will come , Select the monitor icon to view that (not the one when you go with Manage of 0Material_attr).
    3. In the monitor screen you will see Refresh icon , Refresh that
    screen , Now the status will change , after 2 -3 refreshes you
    will see the request turning to red.
    4. Now go back to the manage tab of the 0Material attribute , You
    can delete now.
    Regards,
    Praveen

  • It is possible to delete the request after compression

    Hi,
    It is possible to delete the request after compression,if it yes,how can delete the  request.

    Hi,
    You cannot delete the request individually but you can one of the following:
    1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
    2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
    3. Reverse posting is another possibility.
    Bye
    Dinesh

  • How to delete the Transport Request release from SE09

    Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on  ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
    hope u will help me asap
    thanks
    hardeep

    Hi Hardeep,
    Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
    when u delete a request all the objects saved or locked onto that request are released or unlocked.
    So all the objects that were previously locked or saved onto a req are now ready to save into another req.
    Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
    another option is release the req but do not transport it to target system.
    Regards
    Ellora

  • How to delete the duplicate requests in a cube after compression.

    Hi experts,
        1. How to delete the duplicate requests in a cube after compression.?
        2. How to show a charaterstics and a keyfigure side by side in a bex query output?
    Regards,
    Nishuv.

    Hi,
    You cannot delete the request as its compressed as all the data would have been moved to E table ..
    If you have the double records you may use the selective deletion .
    Check this thread ..
    How to delete duplicate data from compressed requests?
    Regards,
    shikha

  • How to delete the compressed request in bi 7.0?

    how to delete the compressed request in bi 7.0?
    Reverse Posting option available in BI 7.0?
    Thanks,
    Pramod

    Hi Pramod,
    Check this Thread,
    Re: Selective deletion after compression
    before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
    Hope this helps..........

  • How to delete the rollup and compress request from the cube

    Hi Experts,
    I have a requirement, one request was updated into the cube and it was been rollup and then compressed.  As the request was compressed so based on request id we cant perform the deletion.
    So it is possible with selective deletion.  Now before performing the selective deletion do i need to deactivate the aggregates. 
    Help me out on this.
    Regards
    Prasad

    Hi.........
    U hav to deactivate the aggregates................bcoz.........Selective deletion is only possible with uncompressed requests...............ie from F fact table...........after compression data moves from F fact table to E fact table.............. you can't do selective deletion on E fact table.........So first deactivate the aggregates............then do the selective deletion..............then again activate the aggregates..............and do the aggregate filling job manually in RSA1..............but I will suggest u delete the request...............bcoz any how u hav to deactivate the aggregates............and in case of selective deletion u hav to be very particular................if ur load is not taking much time............then delete the request and repeat the load............
    Regards,
    Debjani...........

  • How can we delete the request after compression? is it possible ?if so how?

    how can we delete the request after compression? is it possible ?if so how?

    Hi,
    You basically have 3 options:
    1. Use selective deletion and delete the error records.
    2. Do reverse posting and negate the error records.
    3. This is my preference. Delete all the data from the cube. RSA1 -> cube -> right click -> delete data -> choose "fact and dim" from pop-up. Now reconstruct all the requests that you need i.e ignore the error request. But before all this make sure you have the PSAs for all the request.
    Bye
    Dinesh

  • How to delete the compressed Request ID in the info cube... ?

    Hi BW Gurus,
    one of the info package will upload the request in to three data targets and failed due to error with duplicate records.  I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed. 
    The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
    I tried with selective deletion based on same request ID  i have done that successfully but the request still presents in the data target.  I have checked in listcube and found no data for the request id.
    now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
    can any one help on this. Thanks in Advance.
    Venkat.

    Hi Venkat
    You have one way to delete the compressed request
    But this is possible only if u have the request in PSA
    If the request is in PSA, do reverse posting
    This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
    Regards
    N Ganesh

  • How to delete the previous request in Cube ?

    Hi All
      I have 2 sources loaded to Cube..
    Ex:
    ODS A --> Cube 1
    ODS B --> Cube 1
    Today they 31.10.2011 for both  in CUBE1
    so it becomes...
    ODS A --> Cube 1 --> 31.10.2011
    ODS B --> Cube 1 --> 31.10.2011
    tomorrow they load... CUBE 1 shld be..
    ODS A --> Cube 1 > 31.10.2011--
    DELETED
    So finally my cube has only following requests..
    ODS B --> Cube 1 --> 31.10.2011
    ODS A --> Cube 1 --> 01.11.2011
    ODS B --> Cube 1 --> 01.11.2011
    ODS A request which is older than 1day must be deleted before loading the next day...
    Can I use DELETE OVERLAPPING requests for this requirement? I am not too sure...what are the steps to be created..?
    as I tried but it was not successful.
    can anyone help me with IDEAS or steps??
    thanks a lot

    yes, you are right. You should use Delete overlapping request option.
    If it is not working, please let us know what option did you select for overlapping request deletion, may be you missed something there because overlapping request deletion is the best fit for your requirement.
    One thing you need to make sure that loads on both the days are done through PC only.
    If you do a manual load on 31.10.2011 and then PC loads data on 01.11.11, overlapping request deletion step will not delete the request loaded manually on 31st but if loads are done throught PC only, there should not be a problem.
    Regards,
    Gaurav

  • How to delete the data in the compressed  infocube

    hi, bi gurus
    we are facing a problem in inventory management the info cube in BW production
    normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
    now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
    can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
    option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
    info cube and load the correct data which we are having in PSA
    Thanks
    Joe

    Hi André
    Thanks you for ur answer
    what i am telling is their is an option for selective deletion for inventory cube
    but i don't find any specific option to delete the data that means like calendar day like that
    i hope you got my question.
    hi Saveen Kumar,
    Thank you again
    we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
    next we need to do compression also or not
    and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
    can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
    Thanks in adavance
    Thanks,joe

  • How to delete the queries in  BW Production which are no longer existing.

    Hi,
    How to  delete the queries in BW production which are no longer existing in DEV.
    1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
    Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
    2. I tried creating another query in dev with the same technical name and send a transport with deletion
    it is not working.
    Please advise me on this for any function module or any other method.
    Thanks
    Surya

    Hi,
    If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
    As far as your error is concerned, usually  when you  can delete a query using the delete option in query designer itself,
    Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
    Hope this will be expedite.
    Thax & regards.
    Vaibhave Sharma

Maybe you are looking for