How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

Similar Messages

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

To delete the transport request.

when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
Satish

Hi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani..

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

How to delet the credit card details from apple id account

how to delet the credit card details from apple id account

On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your phone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should also give you a payments link on your account's page.
Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID)
If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information?

How to delete the sales org information from BP Master Data in SAP CRM 5.0

Hi Guruu2019s
How to delete the sales org information from BP Master Data in SAP CRM 5.0
Thanks...
Mahesh Pasupunuri

Hello
There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
Regards
Joaquin

How to track the transport request number for the Role/Composit Role

Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
Ravi

Use transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards

How to get the transport request for a particular standard text?

Hi,
i want to know, how we get the transport request which associated for standard text.
Please note already the standard text is assigned to the TR using RSTXTRAN program.
i have a std text. i want to find the related TR for that!
rds,
Siva.

Refer the link. It might tellsa about attaching to transport request but using the way you can find also -
Re: How To Transport STANDARD TEXTS??
Regards,
Amit
Reward all helpful replies

How can delete the serve.bannersdontwork virus from Safari on Mac?

Hello @all,
How can delete the serve.bannersdontwork virus from Safari on Mac?
About every 8-20 clicks Safari opens a webside named serve.bannersdontwork.
I can not remove this with my Avira antivirus programm.
Can anybody help me?
THX
Hallo an alle,
Ich habe mir einen Virus eingefangen, serve.bannersdontwork, auf Safari.
Alle 8-20 clicks öffnet sich diese Seite "serve.bannersdontwork" und leitet mich auf andere weiter.
Über mein Antivirusprogramm Avira konnte ich den Virus nicht beheben.
Auch die erweiterung AdBlock hilf hier nicht weiter.
Wer weiß, oder hat eine Ahnung, wie man diesen Virus wieder los wird?
Danke schonmal im voraus!!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

What are the Transport Request Release Functionality ?

Sap Specialist,
                     Kindly tell me, I have following Doubt in <b>Transport Request Release</b> .
                     If we Realease any one Transport Request from SE09 in Developement Server,
                     What are the Functionalities Called ?
                     And How is it Export to Production Server ?

Hi,
kindly go through the following hints.
Transport Request within same Server Different Clients
I have 3 clients under one SID (dev 130,140,150).
And we have more than 400+ transport requests in client 130. How can we transport these requests to other clients of 140 & 150. If I want to use tcode SCC1, that can be done only one tran. request at one time.
Do I need to write a script within unix?
Try STMS.
Click on the "import overview"
Double click on your target system
Click "refresh"
Click on "import all request" or ctrl+F9
Specify the target client
Execute the transport
Done...
Thanks,
Shankar

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the Transport Request release from SE09

Similar Messages

Maybe you are looking for