How to delete transport request if child request was released

Hi,
By mistake i released child request but not parent request, but i want to delete whole transport request. it is not allowing to delete it, because child request as releaed.
Thanks,
Subbu.

Not good news..check the below link, it says you cannot delete it but maybe you can get an idea..
Deleting a transport request
Delete Transport Request
A similar case..
Re: How to delete the Transport Request release from SE09

Similar Messages

How to delete Transport Request in the Quality system?

Hi all,
I have made some modifications in the update rule and i have transported to QA. And i found the update rule is active.
But in the transports i have transported some irrelevant multi providers along with the update rule. So is it possible to delete the irrelevant multi providers and queries that are been associated in the update rule in the QA.
if to delete let me know how to delete those unnecesary MP been transported in QA.
thanxs
haritha

HI
Unlock the request in se03 and delete what u want in the se09 tcode in the quality. U will find a delete button on the top.
Correct me if i am wrong
Khaja

How to Delete Transport request for Delete client

Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
Jaichan

You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now...

How to delete an object from a request?

friends,
      There is an exit developed to include a subscreen in a standard screen. The layout, flow logic and some include files are saved in different requests..i saved everything in one request and tried to release it...but it's not getting released.."Repair so, how to delete the object(s) from all the old requests where it is saved? when i attempt to delete the request, it is not allowing saying that changes can't be made to a released request. any other options available? how to go about with this? thanks all.

HI sathish,
1. If the old request is release,
   then we cannot do anything.
(There is no point in changing that old request)
(bcos its already released)
2. what can be done is that
   u save once again the objects,
   and it will once again ask for new request.
3. this time save it in new request
regards,
amit m.

How to delete transport request after merging them into one

Hi all, please help me,
We have created 2 transport requests, and we released all the tasks (not request, just tasks) and after that I used "SE03 - Merge Object Lists" to add the objects of the second request to the first one. Then I released the first transport request and transport it to QA.
Now I have the second request which remains in dev and its tasks already released but I don´t need it anymore, when I tried to delete it, I found it cannot be deleted. I cannot release it because the objects have already been transported in the first transport request.
So what should I do to remove the second request? Please help me. Thank you.
Chang

try with Tr SE03
Did you read the question properly ?
He already mentioned that he used SE03.
@OP: Just release the request as thomas mentioned which will not effect the system.

How to delete the rollup and compress request from the cube

Hi Experts,
I have a requirement, one request was updated into the cube and it was been rollup and then compressed. As the request was compressed so based on request id we cant perform the deletion.
So it is possible with selective deletion. Now before performing the selective deletion do i need to deactivate the aggregates.
Help me out on this.
Regards
Prasad

Hi.........
U hav to deactivate the aggregates................bcoz.........Selective deletion is only possible with uncompressed requests...............ie from F fact table...........after compression data moves from F fact table to E fact table.............. you can't do selective deletion on E fact table.........So first deactivate the aggregates............then do the selective deletion..............then again activate the aggregates..............and do the aggregate filling job manually in RSA1..............but I will suggest u delete the request...............bcoz any how u hav to deactivate the aggregates............and in case of selective deletion u hav to be very particular................if ur load is not taking much time............then delete the request and repeat the load............
Regards,
Debjani...........

How to delete a WBS from Appropriate Request

Hi Gurus,
How Can I delete a WBS from an Appropriate Request?
The AR has a system status Closed, all the fields are grayed-out in change mode.
Is there any workarround to revoke the Status of AR to approved or created.
Is delete AR is only option left.
Thanks in advance,
Regards,
Ganesh

no body is able to ans, I am still facing problem

How to delete a EEWB project that had been released by a previous transport

My company had created an extension to the CRMT_CUSTOMER_H_EXT using EEWB and transported to the production instance successfully and all the customer fields are working fine in production. Now my company wishes to remove this extension. Upon deleting the Project of this extension in EEWB the message 'Project xxxx has extensions and cannot be deleted'.
How can we remove this extension from our Solution Manager instance?

James,
You need to create a new transport to make new changes as the old one has been released. Below are the steps.
1. Focus on your project
2. Click on the right button and choose transport from the context menu
3. Create a new transport to replace the released on.
Please reward points if it helps.
Philip

How to delete users in the child systems with CUA?

Hi All,
We have:
1. My SAP ERP 2005 (ECC 6.0)+ Windows 64bit + Oracle 10
2. EP 7.0 + Windows 64bit + Oracle 10
3. BI 7.0 + Windows 64bit + Oracle 10
4. Solution Manager 4.0 (CUA)
We managed all our QA and DEV users in ECC, EP using CUA from the Solution Manager server (Productive servers and all the BI 7.0 System Landscape aren't in the CUA).
My problem is when i want to delete a user. Sometimes if you delete a user in the solution manager (where the CUA is defined) the user still exists in the Child Systems. In fact you can see it with the SU01 only in the child system. I guess the idea is that if you delete the user in the CUA them the user is delete in the child system.
I found this information in the SAP Help:
As well as the authorizations already mentioned, you also need another authorization in the central system for object S_USER_SYS. You can only assign new systems to a new user with this authorization. ( No Problem with this )
When a user is deleted in the central system, the system entry for the user is retained until the deletion is confirmed. If an error occurs, you can repeat the deletion by canceling the system (in the child system).
What does mean: deletion is confirmed?
Best Regards,
Erick Ilarraza

Hi, thanks a lot for your reply.
We used the SAP Transaction SCUG to solve CUA Problem.
It is something about the refresh of the user in the Parent / Child systems, you need to Re-Refresh users and delete it again.
Best Regrads,
Erick Ilarraza

How to delete transport ed entries in STMS "i.mport History"

Hi,
Can any one help me out on the above issue.

Hi,
My requirement is a bit similiar, I would like to write a script to remove transports that have successfully transported and are over 7 days old. In STMS currently we have a list of every transport that has ever been sent and there is no need. Note that via SE10 we still want to see transport history even for old transports just remove the old ones from STMS. Hopefully I feel some script does this job and no idea on this scripts.
Can someone throw light on this and help me out.
Thanks & Regards,
Bharadwaj.

How to delete a J2EE library from the WAS?

Hello,
I have uploaded a J2EE library to the WAS, it can be found at the Admin tool under: Server->Libraries.
Suppose I don't need these library anymore and I would like to delete it. How do I do it?

Hi Roy,
It depends on which server you are asking for, for Netweaver 2004 and 2004s the easiest way to deploy\undeploy components would be via the SDM UI - launch it from \usr\sap\<sid>\<id>\SDM\program\RemoteGui .
There from the undeployment tab you should see your library, then click the select button, start undeployment and follow the instructions.
You may check the SDM documentation as well - it should be in a doc directory
HTH
Peter

How to delete photos on the ipad which was put on from a lap top. I have tried doing what some said ie: getting into slideshow - but didn't get any arrow to press. Can someone help please?

Can anyone help me to delete photos that were put on my ipad from a lap top computer. I have tried following instructions from another member, but there was no arrow to press by the slideshow - so I was unable to go any further. Appreciate any help, as there are lots of photos.

I am pretty new to Ipad and computers - it's easy to delete photos taken on the Ipad camera - but what do I do on the computer to delete the laptop photos (which a family member put on) I can work my way around a computer OK.

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

Auto creation of child requests when parent request has more than one group

Hi,
I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
Please let me know.

No not possible OOTB in current version. Check {thread:id=2318652} for more information.
-Bikash

How to delete the child record from the database

how to delete a parent and child record from the database can we do it in the servlet and my database is oracle

I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.

How to delete transport request if child request was released

Similar Messages

Maybe you are looking for