How to delete Transport Request in the Quality system?

Hi all,
I have made some modifications in the update rule and i have transported to QA. And i found the update rule is active.
But in the transports i have transported some irrelevant multi providers along with the update rule. So is it possible to delete the irrelevant multi providers and queries that are been associated in the update rule in the QA.
if to delete let me know how to delete those unnecesary MP been transported in QA.
thanxs
haritha

HI
Unlock the request in se03 and delete what u want in the se09 tcode in the quality. U will find a delete button on the top.
Correct me if i am wrong
Khaja

Similar Messages

  • Where i can find the deleted transport request in SAP development system?

    where i can find the deleted transport request in SAP development system?

    Hi,
    When you delete the transport request from SE10 , you can not find the request entry from E070 and E071.
    and only local change request are possible to delete from SE10 /SE09
    if you are try to delete the change request with target system then it's gives you the error that request cannot be deleted because it contains locked objects.
    It's not possible to find out the deleted request from SE10.
    regards,
    kaushal

  • How to compare the transports requests in the same system

    HI ,
    Is there any option to compare transport requests  in the same system whether both contain the same objects or not.

    Ambarish, you can perform check in two ways.
    -you can go to /usr/sap/trans compare the data files and cofiles andcheck the physical size whether it is same or not.
    -you open the TR in SE01 tcode, select the sub TR and expand it it will show you the list of objects/programs included in that TR.
    Hope it addresses your query.
    Regards, Amber S | ITL

  • How to delete transport request if child request was released

    Hi,
    By mistake i released child request but not parent request, but i want to delete whole transport request. it is not allowing to delete it, because child request as releaed.
    Thanks,
    Subbu.

    Not good news..check the below link, it says you cannot delete it but maybe you can get an idea..
    Deleting a transport request
    Delete Transport Request
    A similar case..
    Re: How to delete the Transport Request release from SE09

  • How to Delete Transport request for Delete client

    Hi guys,
    We are going for upgrade from 46C to ECC.
    we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
    But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
    Please suggest me.
    Thanks
    Jaichan

    You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
    Then you can release or delete the transports, afterwards delete the client again.
    I don't know another way of doing it.
    Thomas
    P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
    P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
    To transfer the request to the current client, proceed as follows:
    1. Go to the request overview.
    2. Position the cursor on the request and choose Request/task -> Display/change.
    You are asked if you want to copy the request and all tasks belonging to it to the current client.
    3. Answer "Yes".
    The request is copied to the current client, and can then be edited as normal.
    Note
    For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
    You can copy only your own requests to another client.
    In order to copy other users' requests, you first have to assign them to you.
    You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
    I was not aware of this up to right now...

  • How to delete transport request after merging them into one

    Hi all, please help me,
    We have created 2 transport requests, and we released all the tasks (not request, just tasks) and after that I used "SE03 - Merge Object Lists" to add the objects of the second request to the first one. Then I released the first transport request and transport it to QA.
    Now I have the second request which remains in dev and its tasks already released but I don´t need it anymore, when I tried to delete it, I found it cannot be deleted. I cannot release it because the objects have already been transported in the first transport request.
    So what should I do to remove the second request? Please help me. Thank you.
    Chang

    try with Tr SE03
    Did you read the question properly ?
    He already mentioned that he used SE03.
    @OP: Just release the request as thomas mentioned which will not effect the system.

  • Can give me the details how to release the transport request to the qa

    can give me the details how to release the transport request to the quality server pr production server
    thanks

    Hi,
    Use transaction SE09. Here select "modifiable" .Then click -Display.
    Now you get a list of all requests which can be released.
    Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
    Muraleedharan.R
    091 9880028904

  • How to create transport request of Dynamic Selection view.

    Dear Freinds,
    I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request saved it locally now i want to create a transport request for the dynamic view . Could any please let me know how to create transport request for the Dynamic selection View which has been created or could any please let me know where this dynamic selection gets stored?
    regards
    divya

    Hi Kalyan,
                    In se80> editobjects > selection view .........i have created the selection view . Now i have went into se80 and i dont find the one you have told me . could you please let me know little bit clear where i have to see .
    regards
    divya.

  • How could we delete transport request and task(the released one)

    Hello
    We have a released transport task(not request). Transport request is not released.
    How could we delete transport request and task(the released one). Namely we would not like to transport it to production

    Hi, never delete directly in table.
    There are more tables which depends each other...
    Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
    Using program: RDDIT076 and changing status.

  • How to delete unreleased transport request where the objects are locked

    Hi Experts,
      I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

    Hi,
    First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
    Than go to se10 and delete what you want.
    I hope it helps.
    Bulent

  • How to Recover the Deleted Transport Request

    Hi,
    How to Recover the Deleted Transport Request (Customizing and Workbench).

    Hi Manoj,
    those thins will be done by BASIS people.
    for more info  chekc
    How to recover the deleted Request / task...
    hope it helps you.
    Thanks!

  • Transport request for the deleted dso

    Hi,
    i had deleted the dso in development and not captured the transport request. now how can i generate the transport request for the deleted dso to move for production.
    Regards
    Ram
    Edited by: ramsapconsultant on Mar 9, 2011 7:40 AM

    Hi Ram,
    you can try creating DSO with same name in Dev system. Capture it in transport req.
    Now delete that DSO and capture it in deletion Transport Request.
    I am not 100% sure if this will work but you can give it a try.
    Regards,
    Hardik

  • HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

    Respected all
    i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
    thanks
    abhay

    Hi Mahodaya,
    As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
    Goto RSPC
    Click on create New PC -> enter the PC name n long descp
    Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
    for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
    Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
    Next in the maintenance screen for the deleting the request from change log table will appear.
    Enter the selection patterns to which the requestes should be deleted from the change log.
    In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
    If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
    or
    We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
    OR
    If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
    Delete Successfully Updated Requests Only -This status will delete only requests which
    are successfully updated into corresponding Data Store objects.
    Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
    Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

  • How could I find out which user did release a transport request in the sour

    How could I find out which user did release a transport request in the source system

    Hi Tina,
    Use SE10 t-code and type abaper user name in the user field then check released check box then display and select request number which is released, double click on said request number and click on "object list of request" Then click on "comment: released" than you can find out the released user name at the end of request number along with dated of released.
    I hope you problem will be solved.
    Regards,
    Anil

  • Unable to delete transport request

    Hi Team,
    The Standalone sandbox with ECC 6.0
    Im deleting the transport request , getting error unable to delete the tranport request
    Cannot open log:
    hostname\sapmnt\trans\log\CC000036.SID.
    Kinldy assist me in solving the issue .
    Regards
    Kumar

    Hi,
    Are you trying to remove the transport request from the STMS buffer? This only removes the TR from the buffer. It still stays in the system. If you want to delete the transport request altogether then remove from SE01.
    Check if the file
    hostname\sapmnt\trans\log\CC000036.SID exists. If so, then make sure it has proper authorizations. It should be accessible by <sid>adm and SAPService<SID> if Windows host. Also the trans directory should be accesible by the two users.
    Regards,
    Srikishan

Maybe you are looking for

  • Folders opening in bridge by default instead of explorer

    hi, Recently i installed adobe photoshop cs5 extended. After installing now when i  try to open any folder by double clicking on it, it opens in adobe  bridge..  I have to right click on the folder and then OPEN, then only it opens in explorer. It's

  • TOI no more working

    Yes, Tux On Ice (kernel-netbook 3.2.5) is no more working since 3-4 days, and i can't understand why. I have not upgraded that kernel in these days, so kernel-netbook is the same version since maintainer upgraded it, and it was working until yesterda

  • Ati Mobility M6 LY catalyst

    I've got a laptop with an ATI Mobility M6 LY card in it.  I installed the catalyst drivers and at first the screen would blank out before I could logon.  I fixed this by disabling KMS with "radeon.modeset=0".  I can logon now but startx puts my scree

  • Use TM Back for New Machine

    I've replaced a PowerBook with a MacBook. I'd like to continue my Time Machine backups to the same sparseimage file that the old computer used. I found advice on correcting a TM problem with a new logic board, but they refer to files that don't exist

  • Org mgmt number assignment

    Dear Friends I need your help , Iam trying to create number range intervals for different objects , I hv maintained  the following entries in my number range  table . $$$$ : 00010000- 50000100 01O : 50000101-79999999 The number range is internal in b