How to delete unwanted namespaces in Integration Directory

Hi All,
I have made some testing while creating namespaces in Integration Directory. Now I want to delete the unwanted namespaces. Please help me in doing so.
Regards,
Soorya

HI,
If u want delete unwanted namespaces in IR and ID.Please following these steps.
In IR:
1) First u have to select Softwarecomponent.
2)Select u r Unwanted namespace.
3)Delete developed object onebyone.
4)Remove the namespace from Namespace list Press button.
5)Then activate the deleted objects from change List.
IN ID.
1)Select the integration scenario and right click on it..under popup menu select delete.Then auotmatically delete the objects.After u activate all the deleted objects from change list.
Once u complted these steps unwanted objects have been deleted.
Thanks
Ravi

Similar Messages

Remove deleted software components from Integration directory

Hi,
I have several software components and products which have been removed from the SLD.
But I still can see them on the left tree in the integration directory. How can I remove them
from the tree?
Thank you!
Reward points guaranteed

Hi Michael Schmidt,
At first delete all the namespaces and imported objects under it :
1.Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings. If there are any errors during activation, try activating the Objects in the manner specified as specified below
Integration Scenarios
Actions
Integration Processes
Interface Mapping
Message Mappings
Message Interfaces
Message Types
Data Types
2.There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
3.Delete all namespaces in the editor using sign. Do not save the changes.
4.Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up. Your change list should look like the below.
Then u delete software component by:
Double Click on Software Component, On Right Hand side >Go to Software Component Version>Delete the software component.
U can also refer following link:
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Vinod.

How to delete a namespace from IR

Hi,
I have deleted the all data types but I could not delete the Namespace from IR.
can anyone help me out.
Thanks & Regards
Ashok.

Ashok,
You could take a look at this too..
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Just to be sure
cheers,
Prashanth
P.S Please mark helpful answers

Anyone knows how to delete a file from a directory?????

hi there
anyone has any idea on how to delete a file from a directory? delete(String filename)? thank you.

Hi,
Check this link.
Gives you an example code to show how to delete a file.
http://examples.oreilly.com/jenut/Delete.java
Hope this helps.
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

How to import Adapter's in Integration directory

Hi,
How to import Adapter's in Integration Directory which we can use in communication channel.
Thanks
Hari

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

How to delete unwanted timezones from Calendar app on Yosemite?

I upgraded to Yosemite and one of the problems I had with Calendar App had something to do with Time Zone.
I realized that Calendar added California time as default. So now I want to delete the unwanted time zone, but cannot find a way to do so.
How does one remove or uncheck a time zone in iCal (Mountain Lion)?
I found this forum and tried, but as the last person who posted said, it doesn't work on Yosemite.
Does anyone know to delete unwanted timezones from Calendar App on Yosemite?
Thanks.

Thank you for your response.
However, I am not asking about how to change the timezone on Mac. I'm asking about how to delete unwanted timezones on Calendar app.
Here I have 2 Pacific Time's. They are basically the same, but sometimes my computer choses one of the other without my intention. And when it does, it keeps showing (PST) on next to the starting time which I do not want. In order to avoid that, I'd like to delete "Pacific Time (America/Los_Angeles)". From the link you provided, I'm not finding the solution to this. I might be looking at a wrong spot and if so please be patient to guide me through.
If my question still doesn't make sense, please click the link to the solution for the same problem on Mountain Lion in my original question. You might understand my question better from it.
Thank you.

Help! How To Delete Unwanted Routes in Nokia 5230 ...

How To Delete Unwanted Routes in Nokia 5230 Nuron?
(which are under MENU -->Applications -->MAPS -->Favorites -->Routes)
It's weird that I can create a route but can NOT delete any? Anyone please help!
Solved!
Go to Solution.

GPSLover wrote:
How To Delete Unwanted Routes in Nokia 5230 Nuron?
(which are under MENU -->Applications -->MAPS -->Favorites -->Routes)
It's weird that I can create a route but can NOT delete any? Anyone please help!
On a 5230 highlight the route you wish to delete, then hit the search bar. The keypad appears, then just press the backward pointing small white arrow on the far right hand side of the screen about half way down and it will then say "Delete selected route?"
Happy to have helped forum with a Support Ratio = 42.5

TS3274 How to delete unwanted apps

How to delete unwanted apps

you tab and hold your finger on the icon it then begin to wiggle after awhile
you then click the small X in the corner

How to delete unwanted apps from itunes

how to delete unwanted apps from itunes cant figure it out

What do you mean delete from iTunes? You can't do that on an iPad. You can delete apps in iTunes on a computer. If you want to delete an app on the iPad, tap and hold down on the icon until the icon wiggles, then tap the X appears on the icon to delete the app. Tap the home button when finished.
You really need to explain in more detail what you wNt to do. Maybe this will help.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store - Apple Support

How to delete unwanted contact lists from torch 9810?

How to delete unwanted contact lists from torch 9810?

1 THE ATTACHMENT DOES NOT SHOW IN THE BODY OF THE EMAIL -- BUT IS READABLE ONLINE
2. I DO NOT HAVE NOR CAN I FIND THE LEFT HAND WINDOW (HEADED PERSONAL ..... ESS BOOK IN YOUR IMAGE). THEREFORE NO RIGHT CLICK THEREFORE NO DELETE FUNCTION. I ONLY SEE THE DEFAULT ADDRESS BOOK NAME EMAIL AND SO ON IN 1 WINDOW ONLY. SEE IMAGE 1

Why I can't delete an object from Integration Directory?

Hi!
I want to delete one object from ID(Integration Directory) or IR
(Integration Repository). But the delete button (either the trash can
or the "delete" menu item) is disabled.
I get sap_all and all wanted roles. But I still have this issue.
Please help. Points will be given.

Lee,
If you want to delete a namespace you cannot delete until unless all the objects inside the namespace are deleted. If you want to delete any object in ID then right click on it and press Delete.
Go through this weblog where it shows how to delete namespace:
/people/sameer.shadab/blog/2005/12/05/how-to-remove-namespaces-in-mapping--xi
---Satish

How to block changes only in integration directory

Hi,
I explain the situation I´m experimenting right now:
After importing a tpz file, a developper needs to make some changes for example in the repository but he told the last time that he also modified data in a communication channel in the ID and I´d like to prevent this kind of actions right now...
What kind of roles could I use to stop this user modifying anything in Integration Directory and allow him at the same time making changes in the Integration repository?
Another thing:
Is there a kind of registration log in the Integration Directory in order to consult with details committed actions in the past?
Thank you in advance,
regards,
Olivier

Hi,
>>>What kind of roles could I use to stop this user modifying anything in Integration Directory and allow him at the same time making changes in the Integration repository?
you need to create correct role as per my blog (for directory only in your case)
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
>>Another thing:
Is there a kind of registration log in the Integration Directory in order to consult with details committed actions in the past?
for every objects in ID or IR you can select from objects menu history to check the changes
Regards,
Michal Krawczyk

How to delete unwanted transfer rules from the pool

Hi experts,
I want to know how to delete the unwanted transfer rules from the pool on the right hand side of the transfer rules. I realized I don't need them. I get a warning icon with them sitting in the pool.

You can't delete it yourself. All you can do is hide it so it doesn't appear on your purchased list, as explained here: iTunes Store: Hiding and unhiding purchases. iTunes store support may be able to do this for you if you contact them by filling out this form: https://ssl.apple.com/emea/support/itunes/contact.html.

How to delete unwanted iphotos? (not edited originals)

How can I delete unwanted photos in iphoto? I don't care about deleting originals that I have been edited, I want to remove trash shots from my computer while working in iPhoto. So is there a way to delete photos from DB, w/o going into the finder. I can take 50 shots in 2 mintues. Until I upload in iPhoto, mess with them, I can't tell good from bad. I don't want to store all forever. Help?

atlantalee
Always remember the golden rule. Don' make any changes to the iPhoto Library Folder - the database - in the finder. Do everything working in iPhoto.
It's hard to tell what's good and what's not until you get them into iPhoto or check in Preview.
Dealing with them in iPhoto is the easiest way to do it . Look at them right after you import. You can select multiple shots by holding down the COMMAND key while clicking on the ones you want to trash. You can also use the shift key to get rid of a bunch all in a row. Click the first to select, then click the last holding down SHIFT - that will select all in a row.
Then go to the Photo drop down menu and delete or trash the photos selected.
LN -- you posted your excellent advice while I was typing.

How to delete unwanted namespaces in Integration Directory

Similar Messages

Maybe you are looking for