How to delete users in unity connection

hello all,
I have a unity connection cluster on version 7.1.3 and a cucm cluster on version 7.1.3
when i try to delete a user in unity connection I get the following error
This user is integrated with a Cisco Unified Communications Manager end user. Some fields may be disabled.
I deleted the user in cucm, however the user is still in Unity connection and i can't delete it,
what's the best way to delete a user ?
thank you
Cris

When the CUCM End User is deleted, the corresponding CUC user should automatically be deleted as well. Sometimes this isn't the case and the CUC user still exists and cannot be deleted due to other database hooks.
First you will need to find the ObjectId for the user that you want to remove from Connection:
run cuc dbquery unitydirdb SELECT ObjectId from vw_User WHERE Alias = 'alias of the user you want to delete'
Now you will want to delete that user as such (this will fail if there are database hooks still on the orphaned user):
run cuc dbquery unitydirdb EXECUTE PROCEDURE csp_UserDelete (pObjectId = 'objectid from above')

Similar Messages

Problem deleting user from Unity Connection 8.5.1 - BulkUserDelete

We are having issue deleting a user from Unity Connection 8.5.1
We tried the command line to remove the user, no go. We also installed the CUC Clean Inconsistency 1.2 and that to did not remove it.
We then tried BulkUserDelete tool and the initiial search in BulkUserDelete see's the problem user (alias) but on the next screen where you select the users, on that step the BulkUserDelete no longer see's the problem user.
Anyone know of other way to remove a problem user from CUC?

Thanks, Rob. I appreciate you taking the time to reply. I feel much more confident about the whole procedure now.
I've read many of your replies to others on this same issue so I'm pretty certain you know what you're talking about. One of the documents I read that made me doubt what TAC said is the document by Saurabh - I've read it through several times already and found it very helpful. Thanks for linking to it.
There's a scheduled back up of UC performed every night (all options are checked). Should I still do a COBRAS backup too or is that unnecessary?
Once the upgrade file installation is complete, do I need to do anything else? From what I've read, this is similar to running a Windows (or Mac) operating system update/patch - start the upgrade file, wait for it to run and once it's complete, reboot the system and continue as usual (assuming everything went OK). Is that right?
Thanks again!
Lisa

Error Adding user to Unity Connection 7.0.1

Hi,
I have cisco unity connection installed on standalone machine, when i try to add any user i receive error on the attached picture.
How can i solve this issue.
Thanks

The password credentials - either web or voicemail - conflict with the rules in the Authentication Rule(s) applied at the Subscriber Template and/or individual user level. If you have the "Check for trivial passwords" flag checked then your password cannot be generic strings like 123456 or passwords with repeating characters such as 112233 or even aabbccdd - they are considered easy to hack. Either assign new initial passwords or change the Authentication Rules and I suspect your issue will go away.
Hailey
Please rate helpful posts!

How to configure AutoAtendant on Unity Connection

Hi,
I have a Cisco CallManager 8.6 and a Cisco Unity Connection 8.6 on VMWare.I purchased the bundle (solution) Cisco BE 6000.
I did the integration of the Unity Connection with the CUCM via SIP (I also created a trunk SIP on CUCM to access CUC).
I would like to use the Unity Connection as AutoAttendant.
To do this I saw in the forum that I have to configure:
- a CTI Route Point with a DN on CallManager.
- To do a "forward all" on CTI Route Point to the VoiceMail
- On CUC to Add a new System Call Handler and to assign the same DN than the CTI Route Point
- to go to the Call Handler and to change the default message via My Personal Recording.
it would be well?
would I also have to create a end user on CUCM with Associated Device the CTI Route Point to see this DN as User with Voice Mail on CUC?
I would like that the AutoAttendat after Greeting to transfer the call to the DN which is the Pilot of Attendant Console. This action I don´t know how to do it.
I'm confused because I see on Call Handler a field called "After Greeting" with some settings (Call Action, Call Handler, Directory Handler, Conversation, User with Mailbox) but I don´t see any parameter where I can configure the DN to transfer the call.
I also the field called "Call Transfer Rules" but I am confused.
Another thing, could I to configure the CUC for the Auto Attendant works in one way some days (office hours) and out office hours and holidays works in other way?
It is possible to do on CUC to upload "Recorded Prompts" as UCCX Express to configure them as Greetings or I have to record My Personal Recordings with a Phone?
Can you help me, please?
Thank you very much

Hi,
I continued doing tests but I don´t get that the call is transfered to the Attendant Console Pilot after Greeting.
Sometimes I think that the Unity doesn´t know how to get to Atendant Console Pilot Point.
I read in the forums that I need to configure a call system transfer, by default transfer numbers that are recognized are only elements from CUC and to dial any other number which is not configured on CUC you need a call system transfer.
I also that I need a caller input or a routing rule to reach a call system transfer.
But in my case I want that after greeting the external call (DID) goes to Attendant Console Pilot without dialing any key, ie the outside caller call and he gets the greeting and after is redirected to the Attendant Console Pilot. Therefore I think I don´t need to configure any "caller input".
I did some tests with routing rule but I had not any luck. Could be due to the Unity Connection doesn´t know to get the Attendant Console Pilot.
Remember that I did the integration between CUCM and CUC via trunk SIP. How the Unity Connection knows that to get the Attendant Console Pilot it has to go to the CallManager (via SIP)?
I am confused.
Can you tell me how can I do this?
Regards

ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

Hello All,
I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with IBM LOTUS Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC version is 8.x
I have attached the file that displays the error.
From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
"The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
where 10.0.0.152 is the IP-Address of my Unity Connection Server.
Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
A Quick Help will be much appreciated .......... :-)
Hasan Jafri

Hello Craig,
After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
But still I am NOT able to use Forward option to send the Voice Messages via VMN.
REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
This is error that I am getting
"Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
Its 7 MB Recording. I hope you can easily Download.
Also important point is that i don't see any previous error that was accuring during my earlier testing.
Thanks & Regards,
Hasan Jafri

How to delete users in PRD

hi friends,
In my production server , we want to create new user's with copy of existing users.After that we are planing to delete those user as per user Licenses.
Please suggest me how to proceed this in my PRD server.
Its an urgent requirement.
Tanks in Advance.

Hi,
first you have to do some checks.
1. check if users are used in jobs
Goto transaction se16. enter table TBTCP.
Chose "Settings" -> "Fields for Selection".
Mark the checkbox on field AUTCKNAM.
Press Button "Multible selection" (button next to the selection fields)
Enter the useres you want to delete
2. check if users are used in RFC-destinations
Goto transaction se16. enter table RFCDES.
Enter 9999 in field "Width of Output List"
Enter 9999 in field "Maximum No. of Hits"
In the list you can search for the users.
3. check if users are used in interfaces
For examplu are there users that login to the system by external programs.
You can check this with transaction SM59. RFC-> "Display Trace". Search the list for the users you want to delete.
4. copy users with transaction SU01
If you have a lot of users, program a batchinput or use eCATT.
5. delete users with transaction SU10
select all users you want to delete and press delete
ready
Best regards
Willi Eimler

How to delete users in CMC BO integrated with SAP BW

hello experts,
i am using bo 4.1 , i want to delete users in CMC which is integrated with SAP BW role import.
i am deleting manually but after BW connection refresh again users is coming in to CMC.
please tell me any alternate way to delete users
thanks,
naresh.

Hi,
You cannot delete the users if they are integrated with SAP BW role import.
However if you remove all the roles that the users is/are member of then the user will be removed automatically in next update but by doing so it will remove all other users part of those groups that you are not interested in also.
may i know why are you looking to delete users ?
If you delete manually then all the personal folders will be vanished and even if your user comes back in the next update you will not be able to recover the personal folders.
Thanks,
Tanveer.

How to re-initialize a Unity Connection 8.5 DataBase for Lab testing

I have built an Active/Active Unity Connection 8.5 Cluster on UCS for lab testing and I am wondering how to re-initialize the database (Clean out the database like a new install) without having to reinstall the application. I forgot to take a DRS of the newly installed server to revert back to.
I have tried using Bulk Administration but subscribers and Callhandlers with Dependencies will not be touched by the Bulk Administration job. I need a quick way of getting the database back to fresh install status.

Hi,
Unlike Unity, there isn't a way to do this with UC without re-installing the entire application.
Brad

How to delete Users or Organinzations from oim

Hi,
I have deleted some users as well as organizations in OIM, and I got the message that they are successfully deleted.
But when I try to reconile the same user from csv file using GTC connector or create the deleted organization from OIM I am getting the Error that user already exists and Organization cannot be created
Do we have a way to completely delete the users or organizations
Please help me

This may be due to user logins are same for deleted user and newly coming user. Go to system properties and reuse use login property to true and retry reconciliation.
Else
You can remove from database but it'll be tedious as you would need to delete all reference as well.
regards,
GP

How to delete users listed in Maintenance

Just ran across an archived query with this exact problem, and a pointer to how to discover the answer, so I thought I'd add some details:
When you have created and removed user accounts, the mail accounts end up stuck in the Cyrus database. Here's how to remove them:
edit /etc/imapd.conf and add one of your existing Email users (<user>) as an administrator.
In Server Admin:Mail, stop and restart the service.
Using an IMAP client, connect to that user. I used Webmail, as it's an IMAP client.
Now go back to your shell and:
$ cd /usr/bin/cyrus/admin
$ ./cyradm -u <user> localhost
<You'll be asked for the Email password of that user.>
localhost> lam *
<this will give you a list of all mailboxes, note that the name of the mailbox probably looks like:
"Other Users/username", the whole thing is important and case-sensitive>
localhost> sam "Other Users/username" anyone all
<this gives anyone all privileges (ACLS) to that mailbox>
localhost> dm "Other Users/username"
<this deletes the mailbox and all associated folders>
Rinse-Lather-Repeat till they are all gone.
Enjoy!

Select Bookmarks Bar vice Menu.

How to delete user SAP* from database in MaxDB

I´m unable to login with user SAP* into client 000 but in other clients.
How can I delete the user SAP* from client 000 that I can login with the standard password?
Is it possible within a transaction in another client or only on DB?

Hi Damian,
You need to connect to MaxDB SQL studio using user SuperDBA,admin
Run the following commands
select bname from <SAPSCHEMA>.USER02 where bname='SAP' and MANDT='000;*
This will list user SAP* from client 000
delete from <SAPSCHEMA>.USR02 where bname='SAP' and MANDT='000';*
This will delete SAP* from client 000.
Regards,
Deepak Kori

How to delete user data from damaged iPhone?

Hi,
I have a damaged iPhone 3GS that I'm selling for parts on ebay. The device's is currently stuck on "update mode", basically I was updating to iOS 6.1 a while back and in the middle of the process, the phone returned an "hardware error" message and now it's allways stuck on the "connect to itunes" screen.
No matter what resets I try to do or restores, it wll allways return the "hardware error" message and then to the apple screen and finally to the "connect to itunes" screen.
So, I decided to sell it for parts since I've bought another (newer) iPhone, but I wanted to make sure that all my user data (accounts, text messages, phone numbers, etc.) was deleted just in case the lucky buyer manages to get it fixed. How can I do this?
Will the "clear phone data"option on iCloud do the trick, or do I need to do something more?
I also know that have to remove the iPhone from my iCloud account, is this correct?
What are procedures can you guys recomend for this?
Thanks

I have a "new" piece of information about this issue that might help clarify the problem a bit.
I plugged it in today to do a final check on it's maladies and this is what happened:
1.Device starts charging
2.Device show the "connect to iTunes" screen (the one with the USB and itunes icon)
3.I connect it to iTunes
4.iTunes says something like: "This iPhone's software is damaged. A factory reset is required to restore the OS. Your device will be reset to factory settings and all your data will be deleted. After the reset is completed, you will have the possibility to restore your information on the device"
5. I click "Restore iPhone"
6. It starts checking for software, extracting software, etc.
7.I get the apple screen with the loading bar
8. On iTunes the process stops on the "restoring firmware" step. It gets stuck there for a couple of hours and then eventualy it returns an hardware error
9. The loading bar on the apple screen gets full, but the iPhone never manages to leave "restore iPhone" mode.
From all the iTunes messages and procedures that I'm doing, I take it that the iPhone's memory is in fact already wiped clean, am I assuming it right? That's why he won't boot and is stuck on recovery mode?
Can I also assume that any data I had there cannot be recovered unless I restored it from my laptop/iCloud?
And finally and just out of morbid curiosity, anyone has an idea about what is wrong with the iPhone? I never managed to figure out what happened or if it's something "fixable".
Thanks for the help!

How to delete users (what happens to their files)?

I manage a number of macs in our lab. People come and go, and now it's time to delete some old accounts. If I just delete an account in the "accounts" section of system preferences, do their home directories and files therein get automatically deleted or do I need to go in and do it by hand (or else have a bunch of owner-less files taking up my disk space)? What's the best way to delete an account and everything owned by that user?
Mike

Michael,
Deleting a user account explains how and what files can be deleted.
;~)

How to delete users from my shared list

I have users in my shared tab in the finder.
Some of these computers/users i dont know or dont what to have the risk of being to access my data.
How do i remove them?

Swipe your finger across the item in the list and a red delete button will pop up.

How to Delete Users & Positions massively ?

Hi all,
I upload 300 users approx. in my Prod.Environment using transaction "users_gen" (csv file).
After that, the client reviewed the results and she realized that the file she gave me had a lot of mistakes in the assigned Org.Unit =(
Now I would like to delete massively all those users and their positions...
How can I fix this mess ? =(
Thanks for your help guys !
Regards,
Diego

Hello Diego,
You can try the report RHRHDL00.
Hope it helps.
Pierre

How to delete users in unity connection

Similar Messages

Maybe you are looking for