How to demonstrate pre-built Oracle BI capabilities?

Hi Forum,
Can anyone give me insight, on how to demonstrate Oracle BI capabilities to show the pre-built reports and dashboards with data?
Please explain me the right approach for showcasing the capabilities of Oracle BI.
Thanks

HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

Similar Messages

Pre-built Oracle Solaris 11 VM - Invalid md4 checksum for part04

Hi,
Following the instructions and links available at:
Pre-built Oracle Solaris 11 Express Developer Virtual Machine with Oracle Solaris Studio and GNU development tools
http://www.oracle.com/technetwork/articles/servers-storage-dev/vms11expstudio-howto-401051.html
I downloaded all 4 parts for this VM and the md5 checksums for the first three are fine, however part04 is invalid. I downloaded the part04 file twice with the same results. Judging from the small filesize (only 70MB) it appears to be truncated.
Can someone investigate this part04 file and verify?

I have encountered the same problem.
My workaround was to download the full larger file using a download manager.
I used DownThemAll for Firefox.

Config Pre-Built Oracle Virtual Environment for Minimalist

Hi There
I know you probablyve got asked this question before - and i understand the 1GIG minimal requirement- , but is it possible to install the whole Pre-Built Oracle Virtual Environment, but then disable relevant components to clustering in order to utilize as a basic oracle environment.
Alternatively is there a Pre-Built Oracle Virtual Environment for 9i.
Regards
Kayode

Hi There
I know you probablyve got asked this question before - and i understand the 1GIG minimal requirement- , but is it possible to install the whole Pre-Built Oracle Virtual Environment, but then disable relevant components to clustering in order to utilize as a basic oracle environment.
Alternatively is there a Pre-Built Oracle Virtual Environment for 9i.
Regards
Kayode

How to view pre-built Dashboards and Reports of Oracle BI- Apps?

Hi All,
We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
But we are facing problem in viewing any prebuilt dashboard or report.
Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
Any help would be highly appreciable.
Regards,
Manmohan Sharma

Hi Damon,
Thanks a lot.
Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
Could you please provide the path to get Prebuilt Dashboard & reports ?
Regards,
Manmohan Sharma

Upgrade pre-built Oracle Virtual Machine using Siebel VM template

Hello
I'm planning to deploy a Siebel environment for testing purposes using Oracle Virtual Machines templates (http://www.oracle.com/technetwork/server-storage/vm/siebel-092480.html). this template has been made to deploy Siebel CRM SIA 8.1.1.ENU and i need the 8.1.1.7 version with ENU and ESN languages
My main questions are:
after complete the Siebel installation using this template (8.1.1 ENU), is it possible to upgrade to 8.1.1.7 version? is it possible to add ESN language?
thanks and best regards!
Francisco Ruiz
Oracle Consulting Mexico
Edited by: user733897 on 1/03/2013 11:59 AM

Wilson
Thanks by kind help, but im still face issues, the log indicates a license error but i already introduce the licenses codes but is still showing the error on login.
ServerLog     ProcessCreate     1     00000d67513a0900:0     2013-03-08 20:45:59     Created server process (OS pid =      2525     ) for SCCObjMgr_enu
ServerLog     ProcessCreate     1     00000d67513a0900:0     2013-03-08 20:45:59     Created server process (OS pid =      2542     ) for SMObjMgr_enu
ServerLog     ProcessExit     1     00000d68513a0900:0     2013-03-08 20:56:35     SvrTblCleanup      2431     SBL-OMS-00103 Process 2431 exited with error - Error %1 initializing the license key
ServerLog     ProcessCreate     1     00000d67513a0900:0     2013-03-08 20:56:35     Created server process (OS pid =      2656     ) for SvrTblCleanup
ServerLog     ProcessExit     1     00000d68513a0900:0     2013-03-08 20:56:35     SvrTaskPersist      2432     SBL-OMS-00103 Process 2432 exited with error - Error %1 initializing the license key
ServerLog     ProcessCreate     1     00000d67513a0900:0     2013-03-08 20:56:35     Created server process (OS pid =      2670     ) for SvrTaskPersist
Another log file
2021 2013-03-11 18:00:07 0000-00-00 00:00:00 -0700 00000000 001 ffff 0001 09 SvrTblCleanup 848297986 28037 1101329440 /u01/app/siebel/ses/siebsrvr/enterprises/siebel/siebel811/log/SvrTblCleanup_0809_848297986.log 8.1.1 [21111] ENU
ObjMgrLicense     Error     1     00000005513e6d85:0     2013-03-11 18:00:07     (dmlicmgr.cpp (133)) SBL-DAT-00171: A license key for this software has expired.
Please enter a new key to proceed, or contact your system administrator.
GenericLog     GenericError     1     00000005513e6d85:0     2013-03-11 18:00:07     Object manager error: ([0] A license key for this software has expired.
Please enter a new key to proceed, or contact your system administrator.(SBL-DAT-00171) (0x7500ab))
GenericLog     GenericError     1     00000005513e6d85:0     2013-03-11 18:00:07     ( (0) err=2818155 sys=7667883) SBL-OMS-00107: Object manager error: ([0] A license key for this software has expired.
Please enter a new key to proceed, or contact your system administrator.(SBL-DAT-00171) (0x7500ab))
GenericLog     GenericError     1     00000005513e6d85:0     2013-03-11 18:00:07     (ccfom.cpp (568) err=2818151 sys=0) SBL-OMS-00103: Error 7667883 initializing the license key
GenericLog     GenericError     1     00000005513e6d85:0     2013-03-11 18:00:07     (bsvcmgr.cpp (658) err=2818151 sys=0) SBL-OMS-00103: Error 7667883 initializing the license key
GenericLog     GenericError     1     00000005513e6d85:0     2013-03-11 18:00:07     (smishell.cpp (342) err=2818151 sys=0) SBL-OMS-00103: Error 7667883 initializing the license key
TaskConfig     TaskCfgParamError     1     00000005513e6d85:0     2013-03-11 18:00:07     ***********Dumping Parameters for the current task (848297986) because of errors**********

Installing Pre-built Virtual Machine for Oracle WebCenter Portal error

Hi,
I am trying to install the Pre-built Virtual Machine for Oracle WebCenter Portal: Framework 11gR1 (11.1.1.4.0) onto a Laptop (500G HDD 8G Ram) running Windows 7 to learn.
http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/owcs-portalfw-vbox-284132.html
I want to run in a VirtualBox Linux setup etc.
I have downloaded all the files except the REAVDD-HOL-WC.ovf which would not download so I saved in browser to the same directory etc.
I have set the preferences in Virtual Box to the same directory where I have downloaded the files to but when I Import Applicance and select C:\users\Tony\Virtual Box VMs and select the defaults and import I get an error box stating:
Failed to import appliance C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC.ovf.
Could not open the medium storage unit 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk'.
VD: error VERR_ACCESS_DENIED opening image file 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk' (VERR_ACCESS_DENIED).
Result Code: VBOX_E_FILE_ERROR (0x80BB0004)
Component: Appliance
Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
Anybody got any idea how to fix this?
Thanks
Tony
Edited by: 880197 on 19-Aug-2011 03:08
Edited by: 880197 on 19-Aug-2011 03:44

I've imported this appliance (and others) on Windows 7 32-bit on a Lenovo W500, on an iMac, and on a MacBook. The one error you should encounter during the "import appliance" step is a path error related to shared folder (the canned/hard-coded path in the ovf file points to a place that is not likely to exist on your computer, so just comment out the D:\TEMP\Host path, or make it for that matter).



You can alter system set memory_target=300M scope=both and set your VM memory to 2.5GB and everything will run fine (using the vmctl script to start up what's needed). The "1" option is all that is needed for the tutorial shown in the documentation. If you run the admin server, you will see things run a good bit slower. Part of the tutorial assumes you know about UCM and how to take the UCM content in the sample files and upload those into the repository. You can delete the file already loaded and then do a single file upload to "re-load" the various directories/folders for the menu/home/etc. Upload the png and other files into the same folder (menu.html, menuBanner.png, etc. all go into the same Menu folder). It's not worth the time to set the bulk upload because you have to go out into UCM and dig around the admin settings, stop/restart, and so on. You can also use the contentadmin user (welcome1) to do the file upload.

Do I have to build adapters to Oracle AIA for pre-built integrations?

Hello,
The way Oracle AIA provides pre-built integration packs for Siebel, SAP & other products - how do I develop such integrations for my application? Through AIA foundation packs or do I've to write an adapter to connect with Oracle AIA?
Thx, Amol.

There is a wizard in AIA that creates a few composites for you which follow the rules of the AIA-Specification. Then you can fill them with application-specific-code yourself.
Edited by: user10942884 on 25.06.2010 03:29

Oracle Pre Built Integration 11.2 configuration issue

I installed Pre Built Integration 11.2 in Oracle AIAFP 11.1.1.6. After installation I tried to configure by using "Deployment Configuration Wizard" and following the below steps mentioned in the Oracle document
4. Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh for
Linux based systems and aiaenv.bat for Microsoft Windows to configure the
environment.
5. Navigate to <AIA_HOME>/bin and run the command ./aiaconfig.sh for
Linux based systems and aiaconfig.bat for Microsoft Windows.
This launches the AIA DCW.
6. Click Next.
However the DCW "Deployment Configuration Wizard" is not listing any of the pre built integration for deployment in the second screen(after welcome screen)
Please let me know if any specific configuration has to performed or how to resolve this.
Thanks

Thank you for the suggestions.
Before I could read your reply, I uninstalled EPM and re-installed. After installation completed, I launched the Configurator from the last window, instead of launching it separately later. And it worked this time. All the configurations completed successfully.
But now, I have different issues, I am not able to go to any URL including the Workspace URL. I get 401 error. When I run diagnostics tool, I get a lot of entries highlighted in red. Most of them under the category HTTP. I will post the entries later. I tried stopping EPM system and restarting many times but nothing helped.
FYI... I deployed them all to Single Web Application Server (Web Logic) and when it asked for Web Server, I chose the WebLogic HTTP server which was the default option. IIS is also installed and services are running.

HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

HI FOLKS,
I WANT TO SEE DATA IN THE REPORTS OF PRE-BUILT ANALYTICS DASHBOARDS? EG: AUTOMOTIVE, SALES, SERVICE DASHBOARDS. SO WHAT IS THE COMPLETE PROCESS TO SET UP THIS ENVIRONMENT. I'M USING SIEBEL ANALYTICS VERSION 7.8.5.
THANKS IN ADVANCE
VJ

Hi,
I am new to Business Intelligence Applications and keen on learning it.
I know Informatica and OBIEE(Not a very experienced person).
I have installed BIA on my local windows machine.
I am using Oracle Apps as the source.
In the execute tab I selected the HR-Oracle 11510 execution plan and ran it but it failed.
The workflow error log says the following:
"ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6193 [Error occured during expansion of DB connection parameters [Database connection name DataWarehouse for database connection variable $DBConnection_OLAP is not well defined.
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: CMN_1761 [Timestamp Event: [Tue Feb 26 15:59:35 2008]].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6226 [ERROR: Failed to initialize session [SIL_InsertRowInRunTable]].
ERROR : LM_36320 [Tue Feb 26 15:59:37 2008] : (1276|3864) Session task instance [SIL_InsertRowInRunTable]: Execution failed.
WARNING : LM_36331 : (1276|3864) Session task instance [SIL_InsertRowInRunTable] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_InsertRowInRunTable] will be failed.
ERROR : LM_36320 : (1276|3864) Workflow [SIL_InsertRowInRunTable]: Execution failed."..
I think I have missed few steps here and there.. I am struck up here.. I don't know what to do... I think its the problem connecting to the source and target schema.. can you please help me out?

Pre-built website businesses how to get into dreamweaver?

Hello,
I just purchased a monthly membership to a website that is selling "scripts". Pre-built website businesses that I am able to download and edit as i like. I also recently dowloaded dreamweaver and look forward to learning how to use it. I'm a novice with html, web design, etc and know dreamweaver is pretty "intense". I tried to get these files "php" and "css" into dreamweaver and I'm having difficulty. Is there some easy way this is done that I'm not able to find in my books and online material? thanks!

Hi
Unfortunately without knowing what the 'pre-built' sites contain it will be difficult to say if they can be used 'as is' in dreamweaver.
Many of these pre-built sites contain templates and include files, and depending upon the type of template used, you may require a plug-in to use them in dreamweaver, the good new is that most of the common template systems such as 'smarty', do have dreamweaver extensions available.
The first thing to do is set up a testing server with a server side scripting language as required by the pre-built site. If it is a php/MySQL site then see this article for setting up a testing server - http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html, if it is asp then try this one - http://www.adobe.com/devnet/dreamweaver/articles/setting_up_asp.html, should it be some other then please let me know.
Once you have your testing server of choice set-up, copy the files to a folder in the testing servers htdocs or www.root folder and define your site in the dreamweaver site definitions, to do this see - http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html, this article is for php but the steps required are the same.
Should your site use templates such a smarty, then a search of the web for smarty (replace this with your template name), dreamweaver extension, should find the dreamweaver extension you require, failing this try searching the dreamweaver extensions site at - http://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=3&loc=en_us. There are also many tutorials and how-too's on the dreamweaver developers center pages at - http://www.adobe.com/devnet/dreamweaver/?view=home, to help you get started with dreamweaver.
PZ

Oracle PeopleSoft CRM pre-built VM Template

Hey!
Am looking for a pre-built VM Template of Oracle PeopleSoft CRM.. In the instructions it says:
Visit http://edelivery.oracle.com/oraclevm
Complete your registration information (Name, Company Name, Email Address and Country) and click on the download agreement
Select "Oracle VM Templates" from the "Select a Product Pack" pull-down menu
Select "x86 64 bit" from the "Platform" pull-down menu
Click "Go" and then select from the list of Oracle VM Templates
Download and unzip the files and read the readme
But I can't find PeopleSoft listed in after hitting the "Go" button!
Is there any other way to download it?
Thank you in advance.

It seems Oracle needs to revisit their pages more often, the link you pointed is really out of date. The PSoft OVM CRM91 PTools 8.50 you read from the page you linked is dated from August-2010 when I see my software repository...
The Peoplesoft OVM Templates have been globally decomissioned three years ago I think, you have no luck to find out one of them unless you have already downloaded them.
Nowadays, Peoplesoft is working with the so-called Peoplesoft Images, virtual machine for VirtualBox. Unfortunately, only available for those who have a valid Customer Support Identifier (paid support) and access to My Oracle Support.
The Peoplesoft images are rebuilt on regular basis, perhaps every quarter - depending of the application, with the highest maintenance level (application and tools).
Nicolas.

Is there a pre-built VM with just Oracle Linux?

I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.

881656 wrote:
I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.
I would second Bjorn's suggestion to just go ahead and install Oracle Linux from scratch. As a DBA you need to be familiar with a lot of OS level admin stuff, so installing the OS from scratch and doing the minimal configuration needed to install Oracle is, in itself, an important part of your professional development. If you take a shortcut of using a pre-built vm you are just stunting your own growth.

Oracle Linux 5 (pre-built developer vm)

Hello,
Apologies if this is the wrong forum. Please let me know which forum I should use if it isn't this one.
I'd like to upgrade both the database (Oracle 11.2.0.2) and the Linux (Oracle Linux 5) of the Oracle pre-built vm that I downloaded from here : http://www.oracle.com/technetwork/community/developer-vm/index.html
Database side I'm OK with, getting the zips etc. Where do I get the binaries to upgrade the OS? Metalink doesn't seem to have an Oracle Linux patch section if it isn't for another Oracle product ON Oracle Linux. I'm probably not using it properly.
regards,
Matt

I have no experience with updating the VM image you mention, nor do I know whether this will work or is a good idea. But to answer your question where to obtain Oracle Linux binaries or update the system:
You can download installation DVD's from:
https://edelivery.oracle.com/linux
You can do free updates of Oracle Linux configuring Oracle Public Yum using the el5_latest repository and typing "yum update" at the command line. More info at:
http://public-yum.oracle.com/
Upgrading from one major Oracle or RHEL Linux release to another, e.g. 5.x to 6.x is not supported and cannot be done by yum or other package managers.

How to combine SOA pre-built Virtual Machine

Hi ,
I have downloaded oracle provided SOA pre-built VM. There are 7 files that need be combinted to produce 1 file that Oracle Virtual Box can recognize and import.
http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
I can't find a good way to combine it. I have WinZip installed in my xp machine. Can't extract any of the file with it.
Any idea?
Thanks in advance.
Lisan

The files are in 7zip format, see http://www.7-zip.org/ for the utility to extract them.

Pre-built Thesaurus for Oracle Text

Could anyone provide me direction on where to get Pre-built Thesaurus For Oracle Text that is specific to pharmaceutical science companies.
any advice would be appreicated

There are two ways you can use pre-built Thesaurus in Oracle.
1) Just as an earlier reply you got, use the Thesaurus Management System (TMS) product that comes with a prebuilt Medra database for mdeical and other related text mining.
2) Import and supplement your own medical thesaurus into the existing thesaurus that comes pre-loaded with the database using the provided APIs. As an example, you could download from the web the UMLS thesaurus content, convert the data into the API required format and load the UMLS data into the database. You can then cluster and classify documents/abstracts based on themes or subject matter.
Regards.

How to demonstrate pre-built Oracle BI capabilities?

Similar Messages

Maybe you are looking for