How to Deploy Hello World in SOA suggest Step by step procedure

HI
I am done with the installation of SOA on Windows now I want to deploy same sample like Hello World or my first page.?
When you install SOA all the default example get automatically get installed or do we need to do something else.
Where should I check (can you please let me know the location)
Can you please let me know the step by step procedure for that.
Regards
User649230

Refer below links
http://download-uk.oracle.com/docs/cd/B31017_01/index.htm
http://www.oracle.com/technology/tech/fmw4apps/ebs/BPEL-Hello-World.pdf
Regards

Similar Messages

Deploy hello world

hi!
I'm trying to deploy my hello world jsp and ejb. I tried a pair of different programming, but I always get the same message:
02.12.2005 12:57:37 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[003]Deployment aborted
Settings
SDM host : sbrc30222
SDM port : 50018
URL to deploy : file:/c:/temp/temp33289HelloWorldEar.ear
Result
=> deployment aborted : file:/c:/temp/temp33289HelloWorldEar.ear
Aborted: development component 'HelloWorldEar'/'sap.com'/'localhost'/'2005.12.02.12.57.26':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/HelloWorldEar.. Reason: Application alias "contextRoot" for application "sap.com/HelloWorldEar" already exists in the HTTP Provider Service.; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Application alias "contextRoot" for application "sap.com/HelloWorldEar" already exists in the HTTP Provider Service.
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.checkAliasInHttp(ActionBase.java:178)
 at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
 at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:103)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:594)
 at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:379)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:296)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:290)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:323)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3033)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:463)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.engine.services.httpserver.exceptions.IllegalHostArgumentsException: Cannot add HTTP alias [contextRoot] on host default. An application with the same alias already exists.
 at com.sap.engine.services.httpserver.server.hosts.impl.HostPropertiesModifierImpl.checkAlias(HostPropertiesModifierImpl.java:283)
 at com.sap.engine.services.httpserver.server.HttpHosts.checkApplicationAlias(HttpHosts.java:385)
 at com.sap.engine.services.httpserver.server.HttpProviderImpl.checkApplicationAlias(HttpProviderImpl.java:251)
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.checkAliasInHttp(ActionBase.java:175)
 ... 19 more
', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Application alias "contextRoot" for application "sap.com/HelloWorldEar" already exists in the HTTP Provider Service.
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.checkAliasInHttp(ActionBase.java:178)
 at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
 at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:103)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:594)
 at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:379)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:296)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:290)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:323)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3033)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:463)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.engine.services.httpserver.exceptions.IllegalHostArgumentsException: Cannot add HTTP alias [contextRoot] on host default. An application with the same alias already exists.
 at com.sap.engine.services.httpserver.server.hosts.impl.HostPropertiesModifierImpl.checkAlias(HostPropertiesModifierImpl.java:283)
 at com.sap.engine.services.httpserver.server.HttpHosts.checkApplicationAlias(HttpHosts.java:385)
 at com.sap.engine.services.httpserver.server.HttpProviderImpl.checkApplicationAlias(HttpProviderImpl.java:251)
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.checkAliasInHttp(ActionBase.java:175)
 ... 19 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
I understand the message, that the directory is on the server yet. but I deletet all selfmade programs.

Hi Steffen,
Just edit the context-root element in your EAR file application.xml, e.g.
<context-root>
 Hello
</context-root>
and try deploying again.
HTH!
Vladimir

How to print hello world

class hello{
public static void main (String[]args){
system.out.println(" HELLO WORLD");
Pleasee how to print output to printer with the coordinat x,y
in text mode (dotmatrix printer)???
thx

hi,
http://www.java4less.com/textprinter/index.html

Cannot deploy "Hello World" application using SAP NW CE 7.1

Hello,
I am having problems deploying a simple application to NW CE 7.1 (Welcome application
from NWDS tutorial).
I try to deploy from the NWDS. When I am executing "Deploy new archive
and run" I am asked for user and password.
According to the documentation I give following credentials:
SAP NetWeaver Application Server (e.g. for deploying applications)
username: Administrator
password: <your master password>
However after typing that I get immediate error in NWDS.
ConnectionException,cause=[ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.Reason: Exception during getInitialContext operation. Cannot establish connection to the remote server.
Then the browser opens with following URL: http://localhost:50100/webdynpro/dispatcher/local/Welcome/WelcomeAPP?SAPtestId=38 and the following stack trace is shown.
"Application error occurred during the request procession."
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/Welcome' is not deployed on the server. Please check the used URL for typos.
 at com.sap.tc.webdynpro.clientserver.task.Task.getDeployableObject(Task.java:364)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.initApplicationDeployableObjectPart(RequestManager.java:539)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.initTask(RequestManager.java:477)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doInitWdEnvironment(RequestManager.java:150)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:205)
 at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:205)
 at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
 at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
 at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
 at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
 at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:93)
 at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:105)
 at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
 at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
 at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
 at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
 at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'local/Welcome' since it is not a Web Dynpro object.
 at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.getDeployableObject(DeployableObjectFactory.java:87)
 at com.sap.tc.webdynpro.services.sal.deployment.core.DeployableObjectInternal.getDeployableObjectInternal(DeployableObjectInternal.java:37)
 at com.sap.tc.webdynpro.clientserver.task.Task.getDeployableObject(Task.java:362)
 ... 43 more
Caused by: com.sap.tc.webdynpro.spi.WebDynproRuntimeException: No Web Dynpro application (deployable object) with name local/Welcome exists.
 at com.sap.engine.services.webdynpro.WebDynproRuntimeServiceImpl.getDeployableObject(WebDynproRuntimeServiceImpl.java:254)
 at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.getDeployableObject(DeployableObjectFactory.java:85)
 ... 45 more
Please help.
Best regards.
Paweł

Hi!
For some reason, I am not able to deploy my application again (although it worked for a couple of weeks now)....
The error is:
com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=[ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
 at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:70)
 at com.sap.ide.eclipse.deployer.dc.DCClientFactoryImpl.createClient(DCClientFactoryImpl.java:142)
 at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:195)
 at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:359)
 at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:149)
 at com.sap.ide.j2ee.wtpserver.engineadapter.SapDeployer.deployArchives(SapDeployer.java:30)
 at com.sap.ide.j2ee.wtpserver.engineadapter.SAPPublisher$DeployRunnable.run(SAPPublisher.java:302)
 at java.lang.Thread.run(Thread.java:595)
Caused by: com.sap.engine.services.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
 at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:189)
 at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:115)
 at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:30)
 at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:74)
 at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:67)
 ... 7 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
localhost:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.18.206.83 and port: 50004]
 at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:488)
 at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
 at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
 at javax.naming.InitialContext.init(InitialContext.java:223)
 at javax.naming.InitialContext.<init>(InitialContext.java:197)
 at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:166)
 ... 11 more
Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
localhost:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.18.206.83 and port: 50004
 at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:59)
 at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:35)
 at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:352)
 ... 16 more [ERROR: 01.02.2009 10:15:13 /userOut/daView_category (eclipse.UserOutLocation) [Thread[Thread-27,5,main]] ]
Please help!

SOA 11g Tutorial/Hello World application

Dear All,
I am very much new to SOA Pls let me know Tutorials or How to build Hello world or where to start the building the applications.
Best regards,
Raj

http://www.oracle.com/technology/sample_code/products/soa/index.html
http://blogs.oracle.com/soabpm/2009/12/soa_suite_11g_-somelong_awai.html
http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
Regards,
Anuj

HOW T0: Create a "Hello, World!" sample project.

HOWTO: The "Hello, World!" Sample Project
Follow these steps to create, compile, and run a simple Java program in JDeveloper:
1.Create a project. Choose File | New Empty Project. A new project node, with a name resembling MyProject1.jpr will appear
in the Navigation pane.
2.Create a Java file. Make sure your project node is selected, and choose File | New. The Object Gallery opens. Select the Objects
tab and double-click the Class icon. In the Class Wizard dialog that opens:
1.Replace the default class name with "HelloWorld".
2.Click OK.
A new file node, named HelloWorld.java will appear under your project node.
3.Edit the file. Double-click the file node to open the file. Edit the file, adding this method to the definition of the HelloWorld class.
public static void main(String[] args) {
System.out.println("Hello, World!");
4.Build the project. Choose Project | MakeProject. A message will appear, reporting success or failure, in the Status line at the
bottom of the JDeveloper window. If there are errors they will be listed in the Message View pane, under the Compiler tab.
5.Run the project. When the project has been successfully built, Choose Run | Run. Your message will be printed in the Message
View pane, under the HelloWorld tab.
null

<BLOCKQUOTE>quote:<HR>Originally posted by David Goering (JDeveloper Team):
[b]HOWTO: The "Hello, World!" Sample Project
Follow these steps to create, compile, and run a simple Java program in JDeveloper:
<ol>
[*]Create a project. Choose File | New Empty Project. A new project
node, with a name resembling <tt>MyProject1.jpr</tt> will appear in the Navigation
pane.</li>
[*]Create a Java file. Make sure your project node is selected, and choose
File | New. The Object Gallery opens. Select the Objects tab
and double-click the Class icon. In the Class Wizard dialog that opens:
<ol>
[*]Replace the default class name with "HelloWorld".</li>
[*]Click OK.</li>
</ol>
A new file node, named <tt>HelloWorld.java</tt> will appear under your
project node.
</li>
[*]Edit the file. Double-click the file node to open the file. Edit the file,
adding this method to the definition of the <tt>HelloWorld</tt> class.</li>
<blockquote>
<pre> public static void main(String[] args) {
System.out.println("Hello, World!");
}</pre>
</blockquote>
[*]Build the project. Choose Project | MakeProject. A message will appear,
reporting success or failure, in the Status line at the bottom of the JDeveloper
window. If there are errors they will be listed in the Message View
pane, under the Compiler tab.</li>
[*]Run the project. When the project has been successfully built, Choose Run
| Run. Your message will be printed in the Message View pane, under
the HelloWorld tab.</li>
</ol><HR></BLOCKQUOTE>
null

Hello World help

I am a newbie to Flash Media Development Server 3, on Vista,
trying to get the Hello World sample to work.
When I follow the instructions and place the Hello World
folder in the applications folder and try to test the movie, I get
a "read only" error. I have used the publish settings to make sure
the default paths are used. I read about MS file folder permissions
using cmd prompt ATTRIB, but discovered if I place the Hello World
folder on my desktop I don't get the "read only" error.
I'm seeing the connect button, when I publish to html, but
when I hit the button I just get the disconnect button, and no
"Hello World".
I have the .as, .fla, .swf files on my desktop Hello World
folder, and the .asc in the applications/Hello World folder.
Could someone give me some advice on how to get Hello World
working?
Thank You.

I'm new at this myself so this may or may not help but I think you have a syntax error...
You have:
System.out.printIn("Hello World!");
I think it should be:
System.out.println("Hello World!");
You have the letter "I" ("I"ndia) where a "l" ("l"etter) should be used in the term "println"
Hope that does it...

BPM 11g Hello World Application Error

I am going through step-by-step tutorial on creating Hello World Application BPM 11g where I am running into WSDL Read Error message. The link for this tutorial is here:
Building Your First Process with Oracle BPM 11g
Error occurs at chapter "Enhancing the Basic Hello World Process" -> Adding a Business Rule -> Step 5.
After creating Data Associations for input/output under Implementation dialog for "Review Needed" business rule and clicking on OK of the Properties dialog, I get following error message(please click on the link to see screenshot of error message):
https://drive.google.com/file/d/0B1YDzO9g_MoLNkVTazdXTHp2UVE/edit?usp=sharing
Let me know if you have trouble accessing this link.
Basically the error is about not able to find decision service wsdl file:
Error while reading wsdl file:
ReviewRules_DecisionService_1.wsdl file not found
Also get same error for HelloRules_DecisionService_1.wsdl file not found.
I am not sure whether this file should be automatically generated when performing data associations and implementation of the business rule in the wizard.
Please let me know what could be going wrong here. I tried going through this tutorial multiple times but get stuck at this step.
BPM Suite 11g
BPMN Editor
11.1.1.7.0.0.97
Jdev version: 11.1.1.7.0
Jdev Build: JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493
Thanks.

I looked at the two XSDs the Hello World tutorial had you using. This is what is causing your error.
Here's an XSD that will work for the tutorial with 11.1.1.7. Notice I put both the "hello" and "review" objects in the one XSD so you just have to use the one XSD.
<?xml version= '1.0' encoding= 'UTF-8' ?>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
 xmlns:qt="http://www.mycompany.com/ns/hw" targetNamespace="http://www.mycompany.com/ns/hw"
 elementFormDefault="qualified">
 <element name="HelloObject" type="qt:HelloObjectType"/>
 <complexType name="HelloObjectType">
 <sequence>
 <element name="date" nillable="true" type="dateTime"/>
 <element name="message" nillable="true" type="string"/>
 <element name="greeting" nillable="true" type="string"/>
 </sequence>
 </complexType>
 <element name="ReviewObject" type="qt:ReviewObjectType"/>
 <complexType name="ReviewObjectType">
 <sequence>
 <element name="review" nillable="true" type="string"/>
 <element name="reason" nillable="true" type="string"/>
 </sequence>
 </complexType>
</schema>
Hope this helps,
Dan

How to deploy Enterprise JavaBeans in JBoss server.pls help me

anybody can help me,how to deploy SessionBeans,CMP,BMP,JMS in jb oss server.pls explain me the steps for how to deploy EJB in JBoss server.what are the steps i have to follow.

Hi Chris,
Yes, I have created a MSI package for the application and installed it on the server.
I have created the run time package for powerbuilder and install it on the server.
I have installed the DB Client drivers also.
Can you please help me on how to the configure the application pools, as i never worked on this stuffs,In developemnt enviornment just click on the run webservice and its there .
Regards
Subrat

How to deploy MS Visio & MS Project via SCCM 2012

Dear friend,
Please let me know the How to deploy MS Visio & MS Project via SCCM 2012, step by step
Thanks

You need to utilize Office Customize Tooltik to build config.xml, then distribute the config.xml with setup file. Below are some documents talking about this.
http://blogs.msdn.com/b/visio/archive/2011/02/04/more-on-visio-2010-volume-deployment.aspx
http://blogs.technet.com/b/odsupport/archive/2010/12/03/volume-license-editions-of-visio-2010-install-premium-edition-by-default.aspx
Juke Chou
TechNet Community Support

Anybody can suggest quick sample 'Hello World' with ADF/JSF to deploy on WC

We are using JDeveloper 11g, and Web Center 10.1.3.2.
We have Oracle Portals 10.1.2.0.2
We want to develop a portlet and deploy it to WC 10.1.3.2 to use it in Portals 10.1.2.0.2.
Could anybody suggest any working "Hello World' sample with ADF/JSF to deploy on WC 10.1.3.2 WSRP.
TIA

Just to clarify. Oracle Portal 10.12.0.2 did not support WSRP based portlets (this was introduced in 10.1.4 or Portal) as such you would need to develop a JPDK based portlet in order to use it in both Portal 10.1.2.0.2 and WebCenter. If you upgrade the portal to 10.1.4 you will be able to use a WSRP 1.0 based portlet in both products (WebCenter also supports the draft WSRP2.0 extensions so make sure that you register the correct WSDL file)
If you are trying to use JSF components within the Portlet itself you will need to use the JSF Portlet Bridge which accounts for the differences in lifecycle between JSF and WSRP.

HOW TO: Create a GUI "Hello World"


This document describes how to create and run a very simple "Hello World"
Java GUI app using JDeveloper. The application will have one button and one
text field. Clicking the button will populate the text field with the message,
"Hello World!"
Creating The New Application
In this section, we will create an application with an empty frame.
<ol>
[*]Choose File | New Workspace.
</li>
[*]Choose File | Save Workspace.
</li>
[*]Enter <TT>HelloGui.jws</tt> as the name for the workspace.
This creates a Workspace called HelloGui. A workspace organizes all the projects
you need to work on at one time.
</li>
[*]Choose File | New Project.
The Project Wizard opens. This wizard will help you create a new project called
HelloGui. A project contains all the files that go together in one "tier"--for
example, all the files belonging to a single Java Application client, or all
the files belonging to an Enterprise Java Bean. Because we are working on
a simple, one-tier application, we will only need one project in our workspace.
</li>
[*]If the Welcome page appears, click Next.
</li>
[*]On the Project Type page, in the What is the Project's Filename?
field, change the filename to <TT>HelloGui.jpr</tt>. Leave the rest of the
path the same.
</li>
[*]Select A Project containing a new... and choose Application
from the dropdown list.
</li>
[*]Click Next.
</li>
[*]On the Project Options page, in the What is the name of the project's
default package field, enter <TT>helloGui</tt>.
</li>
[*]Click Next.
</li>
[*]On the Project Information page, you can enter any information about your
project that you wish.
</li>
[*]Click Finish.
The Application Wizard opens.
</li>
[*]In the Class field, enter <TT>HelloApp</tt>.
</li>
[*]Select the New Empty Frame radio button.
</li>
[*]Click OK.
The Frame Wizard opens.
</li>
[*]In the Class field, enter <TT>HelloFrame</tt>.
</li>
[*]Click OK.
JDeveloper creates an application, <TT>HelloApp</tt>, containing an empty
frame, <TT>HelloFrame</tt>. The source code for these classes appears in the
Navigator, which is the upper left-hand pane in the JDeveloper IDE.
</li>
[*]Choose File | Save All.</li>
</ol>
Adding a Panel to the Frame
In this section, we will now add a panel to the frame. In the next section,
we will add all the other components to this panel.
<ol>
[*]In the Navigator, double-click <TT>HelloFrame.java</tt>.
A viewer opens. This viewer has four tabs at the bottom:
<ul>
[*]Source, the currently active tab, which displays the source code
of the selected class</li>
[*]Design, which invokes a visual layout designer</li>
[*]Class, which invokes an editor for the class' attributes, and
can help you stay JavaBean complient</li>
[*]Doc, which displays the class' JavaDoc
</li>
</ul>
</li>
[*]Click the Design tab.
The viewer now displays a grey square, a graphical mock-up of your frame.
Also, on the right-hand side of your screen, the Property Inspector opens.
This allows you to quickly set attributes and define events for components.
</li>
[*]In the component palette (the tabbed toolbar near the top of your screen),
select the Swing Containers tab.
</li>
[*]Click the blue square (described in rollover text as <TT>JPanel</tt>) and
click on your frame to add the panel.
The Property Inspector now displays attributes of the JPanel.
</li>
[*]In the Property Inspector, click twice inside the box beside the name
field.
</li>
[*]Change the name to mainPanel.
</li>
[*]Click the box beside the layout field.
</li>
[*]Choose XYLayout.
XYLayout is an easy-to-use Layout for prototyping. Later, we will change the
layout to a more portable one.</li>
</ol>
Adding Components to the Panel
In this section, we finish laying out a prototype UI. We will add polish and
portability to the UI later.
<ol>
[*]In the Component Palette, select the Swing tab.
</li>
[*]Select the <TT>JTextField</tt> component, which looks like a text field
with a cursor.
</li>
[*]In your panel, click and drag the cursor to outline the text field.
Don't worry if the text field doesn't have exactly the right size or position.
We will adjust these later.
The Property Inspector now displays attributes of the JTextField.
</li>
[*]In the Property Inspector, change the name (just as you did for the
JPanel) to <TT>displayField</tt>.
</li>
[*]Change the text to nothing (erase the value that is already there).
</li>
[*]In the Component Palette, select the <TT>JButton</tt> component, which looks
like a button being clicked.
</li>
[*]In your panel, click and drag the cursor to outline the button.
The Property Inspector now displays attributes of the JButton.
</li>
[*]In the Property Inspector, change the name and action command
to helloButton.
</li>
[*]Change the text to <TT>Say Hello!</tt>.
</li>
[*]Choose File | Save All.</li>
</ol>
Wiring Up the UI
In this section, we wire the UI so that clicking the button causes "Hello
World!" to display in the text field.
<ol>
[*]In the Property Inspector, select the Events tab.
</li>
[*]Click the box next to the Action Performed field and press the Enter
key.
This creates a method, <TT>helloButton_actionPerformed()</tt>, which will
be invoked when the button is clicked, and displays the source code for the
method stub in the viewer.
</li>
[*]In the viewer, add the following command to the body of the method:
<TT>displayField.setText("Hello World!");</tt>
</li>
[*]Choose File | Save All.</li>
</ol>
Testing the Prototype Application
<ol>
[*]Choose Run | Run "HelloApp".
Your application appears, with a blank text field and a button labeled "Say
Hello!"
</li>
[*]Click the button.
The text "Hello World!" appears in the text field.
</li>
[*]Close your application.</li>
</ol>
Refining the UI
In this section, we polish the UI so that the components have the right size
and alignment, the text in the text field shows up red, and the panel uses the
portable GridBag layout instead of the JDeveloper-specific XYLayout.
<ol>
[*]In the viewer, select the Design tab.
</li>
[*]Select your text field.
</li>
[*]Drag the edges of your text field until it is the size you want.
</li>
[*]Drag the center of the text field until it is the vertical position you
want.
</li>
[*]Right-click the text field and choose Align Center.
This centers your text field horizontally in the frame.
</li>
[*]In the property inspector, click the box next to the foreground field.
</li>
[*]Click the ellipses (...).
A color editor appears.
</li>
[*]Select Red from the dropdown list.
</li>
[*]Click OK.
</li>
[*]On your frame, select your button.
</li>
[*]Drag the right edge of your button until it is the horizontal size you want.
</li>
[*]Select your text field, and multi-select your button by control-clicking
it.
</li>
[*]Right-click your button or text field.
</li>
[*]Choose Same Size Vertical.
This sets the height of all selected components to that of the first selected
component (the text field).
</li>
[*]Right-click your button or text field.
</li>
[*]Choose Align Center.
This aligns the center of all selected components to that of the first selected
component (the text field).
</li>
[*]Select your panel by clicking anywhere on the grey background in the visual
designer.
</li>
[*]In the Property Inspector, click the box beside the layout field.
</li>
[*]Select GridBagLayout from the dropdown list.
</li>
[*]Choose File | Save All.</li>
</ol>
Running the Finished Application From Within JDeveloper
<ol>
[*]Choose Run | Run "HelloApp".
Your application appears, with a blank text field and a button labeled "Say
Hello!"
</li>
[*]Click the button.
The text "Hello World!" appears in the text field, in red.
</li>
[*]Close your application.</li>
</ol>
Deploying the Application to Your File System
<ol>
[*] In the Navigator, right-click <tt>HelloGui.jpr</tt> and choose New Deployment
Profile.
The Deployment Profile Wizard opens.
</li>
[*]If the Welcome page appears, click Next.
</li>
[*]On the Delivery page, select Web Application or Command-Line Application
from the dropdown list, and click Next.
</li>
[*]On the Staging Area page, in the Deployment Destination field, enter
<tt><JDeveloper>/HelloGui</tt>, where <tt><JDeveloper></tt>
is your JDeveloper root directory. Click Next.
</li>
[*]On the Project page, select all the <tt>.java</tt> files and click Next.
</li>
[*]Skip the Archive page and Applet Tags page by clicking Next on each.
</li>
[*]On the Libraries page, shuttle all libraries from the Project Libraries
list to the Deployed Libraries list, and click Next.
</li>
[*]On the Finish page, name the profile <tt>HelloGui.prf</tt>, and click Finish.
</li>
[*]When JDeveloper asks you if you want to deploy now, click Yes.</li>
</ol>
JDeveloper will archive your application files and copy this archive and all
other required libraries to <tt><JDeveloper>/HelloGui</tt>.
Running the Application from the Command Line
<ol>
[*]Open a command-line prompt.
</li>
[*]Enter the following script.
Note: You may want to create a batch file containing this script. Be
sure to replace JDeveloper_Home with your JDeveloper home directory.
<pre>set __CLASSPATH_ROOT_DIR__=JDeveloper_Home\HelloGui
set CLASSPATH="%__CLASSPATH_ROOT_DIR__%\HelloGui.jar"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\xmlparserv2.jar"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\classes12.zip"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\jdev-rt.zip"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\swingall.jar"
cd JDeveloper_Home\HelloGui
jre -cp %CLASSPATH% helloGui.HelloApp</pre>
</li>
[*]Your application appears, with a blank text field and a button labeled "Say
Hello!"
</li>
[*]Click the button.
The text "Hello World!" appears in the text field, in red.
</li>
[*]Close your application.</li>
</ol>


null

Hello,
I followed your instruction step by step to make this "Hello World", but when I run it, I got message "cannot find the runable node". What do I miss here? Thanks.
<BLOCKQUOTE>quote:<HR>Originally posted by Avrom Faderman ([email protected]):

This document describes how to create and run a very simple "Hello World"
Java GUI app using JDeveloper. The application will have one button and one
text field. Clicking the button will populate the text field with the message,
"Hello World!"
[b]Creating The New Application
In this section, we will create an application with an empty frame.
<ol>
[*]Choose File | New Workspace.
</li>
[*]Choose File | Save Workspace.
</li>
[*]Enter <TT>HelloGui.jws</tt> as the name for the workspace.
This creates a Workspace called HelloGui. A workspace organizes all the projects
you need to work on at one time.
</li>
[*]Choose File | New Project.
The Project Wizard opens. This wizard will help you create a new project called
HelloGui. A project contains all the files that go together in one "tier"--for
example, all the files belonging to a single Java Application client, or all
the files belonging to an Enterprise Java Bean. Because we are working on
a simple, one-tier application, we will only need one project in our workspace.
</li>
[*]If the Welcome page appears, click Next.
</li>
[*]On the Project Type page, in the What is the Project's Filename?
field, change the filename to <TT>HelloGui.jpr</tt>. Leave the rest of the
path the same.
</li>
[*]Select A Project containing a new... and choose Application
from the dropdown list.
</li>
[*]Click Next.
</li>
[*]On the Project Options page, in the What is the name of the project's
default package field, enter <TT>helloGui</tt>.
</li>
[*]Click Next.
</li>
[*]On the Project Information page, you can enter any information about your
project that you wish.
</li>
[*]Click Finish.
The Application Wizard opens.
</li>
[*]In the Class field, enter <TT>HelloApp</tt>.
</li>
[*]Select the New Empty Frame radio button.
</li>
[*]Click OK.
The Frame Wizard opens.
</li>
[*]In the Class field, enter <TT>HelloFrame</tt>.
</li>
[*]Click OK.
JDeveloper creates an application, <TT>HelloApp</tt>, containing an empty
frame, <TT>HelloFrame</tt>. The source code for these classes appears in the
Navigator, which is the upper left-hand pane in the JDeveloper IDE.
</li>
[*]Choose File | Save All.</li>
</ol>
Adding a Panel to the Frame
In this section, we will now add a panel to the frame. In the next section,
we will add all the other components to this panel.
<ol>
[*]In the Navigator, double-click <TT>HelloFrame.java</tt>.
A viewer opens. This viewer has four tabs at the bottom:
<ul>
[*]Source, the currently active tab, which displays the source code
of the selected class</li>
[*]Design, which invokes a visual layout designer</li>
[*]Class, which invokes an editor for the class' attributes, and
can help you stay JavaBean complient</li>
[*]Doc, which displays the class' JavaDoc
</li>
</ul>
</li>
[*]Click the Design tab.
The viewer now displays a grey square, a graphical mock-up of your frame.
Also, on the right-hand side of your screen, the Property Inspector opens.
This allows you to quickly set attributes and define events for components.
</li>
[*]In the component palette (the tabbed toolbar near the top of your screen),
select the Swing Containers tab.
</li>
[*]Click the blue square (described in rollover text as <TT>JPanel</tt>) and
click on your frame to add the panel.
The Property Inspector now displays attributes of the JPanel.
</li>
[*]In the Property Inspector, click twice inside the box beside the name
field.
</li>
[*]Change the name to mainPanel.
</li>
[*]Click the box beside the layout field.
</li>
[*]Choose XYLayout.
XYLayout is an easy-to-use Layout for prototyping. Later, we will change the
layout to a more portable one.</li>
</ol>
Adding Components to the Panel
In this section, we finish laying out a prototype UI. We will add polish and
portability to the UI later.
<ol>
[*]In the Component Palette, select the Swing tab.
</li>
[*]Select the <TT>JTextField</tt> component, which looks like a text field
with a cursor.
</li>
[*]In your panel, click and drag the cursor to outline the text field.
Don't worry if the text field doesn't have exactly the right size or position.
We will adjust these later.
The Property Inspector now displays attributes of the JTextField.
</li>
[*]In the Property Inspector, change the name (just as you did for the
JPanel) to <TT>displayField</tt>.
</li>
[*]Change the text to nothing (erase the value that is already there).
</li>
[*]In the Component Palette, select the <TT>JButton</tt> component, which looks
like a button being clicked.
</li>
[*]In your panel, click and drag the cursor to outline the button.
The Property Inspector now displays attributes of the JButton.
</li>
[*]In the Property Inspector, change the name and action command
to helloButton.
</li>
[*]Change the text to <TT>Say Hello!</tt>.
</li>
[*]Choose File | Save All.</li>
</ol>
Wiring Up the UI
In this section, we wire the UI so that clicking the button causes "Hello
World!" to display in the text field.
<ol>
[*]In the Property Inspector, select the Events tab.
</li>
[*]Click the box next to the Action Performed field and press the Enter
key.
This creates a method, <TT>helloButton_actionPerformed()</tt>, which will
be invoked when the button is clicked, and displays the source code for the
method stub in the viewer.
</li>
[*]In the viewer, add the following command to the body of the method:
<TT>displayField.setText("Hello World!");</tt>
</li>
[*]Choose File | Save All.</li>
</ol>
Testing the Prototype Application
<ol>
[*]Choose Run | Run "HelloApp".
Your application appears, with a blank text field and a button labeled "Say
Hello!"
</li>
[*]Click the button.
The text "Hello World!" appears in the text field.
</li>
[*]Close your application.</li>
</ol>
Refining the UI
In this section, we polish the UI so that the components have the right size
and alignment, the text in the text field shows up red, and the panel uses the
portable GridBag layout instead of the JDeveloper-specific XYLayout.
<ol>
[*]In the viewer, select the Design tab.
</li>
[*]Select your text field.
</li>
[*]Drag the edges of your text field until it is the size you want.
</li>
[*]Drag the center of the text field until it is the vertical position you
want.
</li>
[*]Right-click the text field and choose Align Center.
This centers your text field horizontally in the frame.
</li>
[*]In the property inspector, click the box next to the foreground field.
</li>
[*]Click the ellipses (...).
A color editor appears.
</li>
[*]Select Red from the dropdown list.
</li>
[*]Click OK.
</li>
[*]On your frame, select your button.
</li>
[*]Drag the right edge of your button until it is the horizontal size you want.
</li>
[*]Select your text field, and multi-select your button by control-clicking
it.
</li>
[*]Right-click your button or text field.
</li>
[*]Choose Same Size Vertical.
This sets the height of all selected components to that of the first selected
component (the text field).
</li>
[*]Right-click your button or text field.
</li>
[*]Choose Align Center.
This aligns the center of all selected components to that of the first selected
component (the text field).
</li>
[*]Select your panel by clicking anywhere on the grey background in the visual
designer.
</li>
[*]In the Property Inspector, click the box beside the layout field.
</li>
[*]Select GridBagLayout from the dropdown list.
</li>
[*]Choose File | Save All.</li>
</ol>
Running the Finished Application From Within JDeveloper
<ol>
[*]Choose Run | Run "HelloApp".
Your application appears, with a blank text field and a button labeled "Say
Hello!"
</li>
[*]Click the button.
The text "Hello World!" appears in the text field, in red.
</li>
[*]Close your application.</li>
</ol>
Deploying the Application to Your File System
<ol>
[*] In the Navigator, right-click <tt>HelloGui.jpr</tt> and choose New Deployment
Profile.
The Deployment Profile Wizard opens.
</li>
[*]If the Welcome page appears, click Next.
</li>
[*]On the Delivery page, select Web Application or Command-Line Application
from the dropdown list, and click Next.
</li>
[*]On the Staging Area page, in the Deployment Destination field, enter
<tt><JDeveloper>/HelloGui</tt>, where <tt><JDeveloper></tt>
is your JDeveloper root directory. Click Next.
</li>
[*]On the Project page, select all the <tt>.java</tt> files and click Next.
</li>
[*]Skip the Archive page and Applet Tags page by clicking Next on each.
</li>
[*]On the Libraries page, shuttle all libraries from the Project Libraries
list to the Deployed Libraries list, and click Next.
</li>
[*]On the Finish page, name the profile <tt>HelloGui.prf</tt>, and click Finish.
</li>
[*]When JDeveloper asks you if you want to deploy now, click Yes.</li>
</ol>
JDeveloper will archive your application files and copy this archive and all
other required libraries to <tt><JDeveloper>/HelloGui</tt>.
Running the Application from the Command Line
<ol>
[*]Open a command-line prompt.
</li>
[*]Enter the following script.
Note: You may want to create a batch file containing this script. Be
sure to replace JDeveloper_Home with your JDeveloper home directory.
<pre>set __CLASSPATH_ROOT_DIR__=JDeveloper_Home\HelloGui
set CLASSPATH="%__CLASSPATH_ROOT_DIR__%\HelloGui.jar"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\xmlparserv2.jar"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\classes12.zip"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\jdev-rt.zip"
set CLASSPATH=%CLASSPATH%;"%__CLASSPATH_ROOT_DIR__%\swingall.jar"
cd JDeveloper_Home\HelloGui
jre -cp %CLASSPATH% helloGui.HelloApp</pre>
</li>
[*]Your application appears, with a blank text field and a button labeled "Say
Hello!"
</li>
[*]Click the button.
The text "Hello World!" appears in the text field, in red.
</li>
[*]Close your application.</li>
</ol>

<HR></BLOCKQUOTE>
null

How to create and run J2EE application client for Hello World EJB

Hi
I am new to NWDS EJB deployment.I have created a "Hello World" bean. But how to deploy it and run using a J2EE application client step by step.
Also please help in the steps of the deploy tool.
Thanks in Advance

Hi Ananda
Check this link,
http://help.sap.com/saphelp_nw04/helpdata/en/55/600e64a6793d419b82a3b7d59512a5/content.htm
cheers
Sameer

How can I remove "Hello World!" from my browser menu bar

I just noticed there'e something in my brower menu bar that has never been there before. Next to the other menu options (File, Edit, View, History, etc.) appears the words"Hello World!". I know it wasn't there two weeks ago, and it's highly unlikely I would have missed seeing it a few days ago when I last did extensive browsing. In hopes of fixing the problem myself, I deleted the only two FF add-ons installed to my PC in the past month. I also ran a system restore to a point created 35 days ago. But "Hello World!" still remained in the menu bar. When I try clicking it on, nothing happens. I tried removing it by pressing the "Customize"option in the toolbar, but it "Hello World!" would not drag down from the menu bar. I was still running FF version 22.0., and when I saw that an update to FF 23.0 was available, I ran the update, but this did nothing the fix my issue (I'm currently back to FF22.0, due to the System Restore that I ran earlier). Finally, I went to both my "Program Files" folders, and sorted them using "Date Modified", to identify any programs changed or added in the past several weeks. There were only a few programs changed in this timespan, so I scoured all files within those few folders, but nothing stood out as unusual. CAn anyone tell me what this "Hello World!" is or why it is appearing in my menu bar? Most importantly, would anyone know how I can remove it permanently ? Following Firefox's instructions, I've created a Print Screen photo showing my brower toolbars, including the menu bar ( at the very top just above my address bar), so that you can see where "Hello World!" appears. Not sure yet how to attach the PrtScn photo to this question I'm about to submit, so if it doesn't make it to the forum with my question, I can send it to anyone who emails me a reply.
Thank You.

THis is a reply to my own question, so that I can upload the Print Screen image of my browser toolbar. Look for "Hello World!" at the top, just above my address bar. Thanks again to anyone who can help me remove this from my menu bar.

ADF :Hello world Page and discussion for its deployment with Oracle guys!

I have written a small article of creating hello world page in ADF with screenshtots,here is the link:
http://mukx.blogspot.com/2008/03/adf-hello-world-page.html
This article can help you for a self starter with ADF and some baisc idea of same components in both OAF and ADF.
Here is the link of recent mail conversation with Oracle guys for ADF project deployment:
http://mukx.blogspot.com/2008/04/discussion-for-deploying-adf-project-in.html
--Mukul

Hi Mukul,
Thanks for the tute, am new to ADF so this was of great help to me. I had a query, if i want to have my own look and feel web pages and Oracle ADF ones, does the custimzation involve too much of manual coding or can be done easily in ADF. Also is there an equivalent tag to div in ADF Faces

How to Deploy Hello World in SOA suggest Step by step procedure

Similar Messages

Maybe you are looking for