How to deploy .msp files through SCCM 2012

Team,
Can you please help me to deploy .msp files through SCCM 2012?
Regards,
Mahadev Nitture

I tried to search and got few things but didn't understand to proceed with.
Please help me with this.
Regards,
Mahadev Nitture
You can use a typical/standard application deployment method (just a minor change because of MSPfile).
Here are some guides, for typical application deployment:
http://technet.microsoft.com/en-us/library/gg682159.aspx
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_7075.html
Familiarise yourself with these methods, then return to the example suggested by Torsten for specific steps for MSP:
https://social.technet.microsoft.com/Forums/en-US/3dac27fd-ce4f-4d3d-946b-d08d4c7f5af5/best-way-to-deploy-an-msp?forum=configmanagerapps
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Deploying Office 2013 through SCCM 2012 SP1 leaves Office 2010 Tools and Sharepoint behind

I apologize in advance, but I have searched similar topics to this, but I haven't seen an answer yet that describes where and how to accomplish this. I'm also a bit new to SCCM and I'm still finding the nuances.
Scenario: Running SCCM 2012 SP1. Office 2013 32bit is added as an application and deployed properly with an accompanied .msp file stored in the source folder. The configuration is to have Office
2010 uninstalled silently. The deployment runs flawless and the user doesn't know otherwise. Success in anyone's book, right?
Except... Office 2010 Tools and SharePoint Workspace 2010 are left over. Manual uninstallation is not an option. This is for hundreds of PC's in several global locations.
I've seen it hinted to write a script. That's fine I suppose, but what do I write, where do I store the script, and can I have SCCM2012 automatically run it before the installation of 2013?
Our favorite IT tool Google hasn't quite returned what I'm looking for. Does anyone here have ideas or perhaps have experienced a similar issue?
Thanks,

1st, save the following content as a XML file on a server share, named as "config.xml".
<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Run the following script during or before the installation of Office 2013:
"C:\Program Files\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe" /uninstall ProPlus /config \\servershare\Config.xml
For more SCCM specific topics, we'd recommend you to visit the SCCM forums at:
http://technet.microsoft.com/en-us/systemcenter/gg191847
Max Meng
TechNet Community Support

Windows 8.1 clients are not detecting updates deployed to them through SCCM 2012 R2

Hello,
We are using SCCM 2012 R2 to deploy software updates.
On Windows 8.1 SCCM does not show certain updates as being needed and isn't deploying them to the clients even though Windows Update will show them as high importance. These same updates are being detected and deployed to Windows 8 clients successfully.
I believe that the update catalog that WSUS uses may have some incorrect detection rules for the following updates:
2917933
2913320
2913270
2913152
2909569
2904440
2904266
2903939
2899189
2893984
2893294
2892074
2916626
2898785
My automatic deployment rules include Windows 8.1 in the product category. I have even created a standalone rule for Windows 8.1 that builds a new package and the behavior is the same.
We only have a handful of Windows 8+ clients so this hasn't been a big issue but others may want to keep an eye out.

I am also running into this issue. After "checking online for updates" on one of my machines in office I found that there were 21 important updates for my 8.1 box. When I cross reference them in SCCM under All Software Updates, it appears these
8.1 updates are not listed. They are however listed for all other OS.
10 seconds after typing this, I went in to verify my WSUS -> Products and Classifications settings and come to find 8.1 and 2012 R2 weren't selected, even though it's an option in SCCM. Go figure! This wasn't the end though. After
running a Synchronization, my issue still wasn't resolved. Went back to check my settings and they again were changed back to having these OS unchecked. Finally, a solution! I found that in SCCM, under Administration tab, Site Configuration
> Sites > ABC - Mysitename, right click and scroll down to "Configure Site Components" > Software Update Point. This setting (although the same as is in WSUS) takes precedence, thus was rolling my settings back to the original configuration
in WSUS.
So long story short, even though my automatic deployment rules stated approve all windows 7/8/8.1 criticals/importants, 8.1 was getting skipped for the most part because my WSUS server wasn't syncing with Microsoft for all of the updates I required. I
did have a couple of updates that squeezed through because they were categorized as "Security Updates for Windows 8, 8.1".
Not sure if this is the solution you were looking for, but your thread got me started in the right direction, hopefully this response helps in the same way!
Thanks!

How to resolve BADMIFS file in SCCM 2012

Hi,
I am trying to resolve Hardware inventory issue on the machines which is not reported more than 10 days in SCCM 2012.
I found there are BADMIFS files created in the below location.
How to resolve the issue on the machines which is under below each BADMIFS folders. Do we have any troubleshooting steps for each folder?

For troubleshooting hardware inventory import, you can check below link
https://sccmfaq.wordpress.com/2013/10/16/sccm-2012-troubleshot-hardware-inventory-import/
For Resolve-cleanup BadMIFs, you check below script
https://gallery.technet.microsoft.com/scriptcenter/SCCM-2012-bad-hardware-0bec0ee0
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Deploying ipa file via SCCM 2012 R2 / Intune

Hello Experts,
We recently set up a Windows Intune Subscription in our Configuration Manager 2012 R2 Environment. The MDM part (Configuration Items) and deploying app store deep links is working without any problems.
In our company we have a native iOS App which is currently distributed via a website. (Not App Store!). I tried to distribute the app via configuration manager 2012 r2 but the app doesn't show up in the company portal even after a day. I made the following
steps to distribute the app:
1. Received the ipa and plist File from the Developer.
2. Added the application to configuration manager 2012 r2
3. Deployed the application to my intune user collection (DP: manage.microsoft.com / Purpose: Available)
Did i miss any importent step? One thing i can say is that the app is not signed with our APN Certificate which is used in the Intune Subscription. According to our developer this should not be neccessary?!
Thanks for any advice.

I redeployed the app and the following entries were in the logs:
dmpuploader.log:
Found sync start for replication group CloudDmp~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:20.870-120><thread=1268 (0x4F4)>
StartUpload for replication group CloudDmp last sync version 102489 ...~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:20.870-120><thread=1268 (0x4F4)>
Startload succeeded with transmission ID c3d5cd09-24ab-41ca-882b-16884cee269e~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:21.198-120><thread=1268 (0x4F4)>
Expecting sync data or sync end message, however message type is DRS_SyncPing~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:21.697-120><thread=1268 (0x4F4)>
EndUpload transmission c3d5cd09-24ab-41ca-882b-16884cee269e final data version 102490 succeeded~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:21.822-120><thread=1268 (0x4F4)>
Found sync start for replication group CloudDmp~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:21.822-120><thread=1268 (0x4F4)>
StartUpload for replication group CloudDmp last sync version 102490 ...~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:21.822-120><thread=1268 (0x4F4)>
Startload succeeded with transmission ID fc4037f9-f99a-40a4-bf8a-a827a007228f~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:21.947-120><thread=1268 (0x4F4)>
Expecting sync data or sync end message, however message type is DRS_SyncPing~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:22.071-120><thread=1268 (0x4F4)>
EndUpload transmission fc4037f9-f99a-40a4-bf8a-a827a007228f final data version 102491 succeeded~~ $$<SMS_DMP_UPLOADER><04-08-2014 14:53:22.181-120><thread=1268 (0x4F4)>
outgoingcontentmanager.log
Computed hash: FD2EBFDE308A335BCC11B416A5069975CFB36244DA6398871BF284641F720F00 $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:17.272-120><thread=8604 (0x219C)>
Content hash validated for 'Content_25b08807-a83b-4736-ac0e-64e82cbd62bc'. $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:17.288-120><thread=8604 (0x219C)>
STATMSG: ID=9515 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_OUTGOING_CONTENT_MANAGER" SYS=SERVER.fqdn SITE=P01 PID=5104 TID=8604 GMTDATE=Di Apr 08 12:49:17.288 2014 ISTR0="P01001B7" ISTR1="["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="P01001B7" AID1=404 AVAL1="["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\" $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014
14:49:17.288-120><thread=8604 (0x219C)>
STATMSG: ID=9516 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_OUTGOING_CONTENT_MANAGER" SYS=SERVER.fqdn SITE=P01 PID=5104 TID=8604 GMTDATE=Di Apr 08 12:49:17.288 2014 ISTR0="P01001B7" ISTR1="["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="P01001B7" AID1=404 AVAL1="["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\" $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014
14:49:17.288-120><thread=8604 (0x219C)>
Uploading package P01001B7 from source D:\Program Files\Microsoft Configuration Manager\SMS_OCM_DATACACHE\P01001B7.1.9956.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:17.397-120><thread=8604 (0x219C)>
ICM Intializing...~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:17.397-120><thread=8604 (0x219C)>
Found certificate with thumbprint 5432E7D0D36FAF934364B7E3AFC4BB181FE41185~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:17.412-120><thread=8604 (0x219C)>
Content source directory is D:\Program Files\Microsoft Configuration Manager\SMS_OCM_DATACACHE\P01001B7.1.9956~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:17.444-120><thread=8604 (0x219C)>
Creating a software distribution package for SCCM PackageId P01001B7 from location D:\Program Files\Microsoft Configuration Manager\SMS_OCM_DATACACHE\P01001B7.1.9956\Content_25b08807-a83b-4736-ac0e-64e82cbd62bc.1\App.ipa.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014
14:49:17.553-120><thread=8604 (0x219C)>
Phase: AuthoringMetadata started.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:18.270-120><thread=8604 (0x219C)>
Preparing files for upload for SCCM PackageId P01001B7, SCCM ApplicationId 283cb33f-177c-4957-9e2c-d376c2311b77, IntuneApplicationId 2c9a7e42-85e4-41a2-8754-ae971be40808~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:19.628-120><thread=8604
(0x219C)>
Progress: 100% (phase), 16% (total). ~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:19.643-120><thread=8604 (0x219C)>
Progress: 100% (phase), 16% (total). ~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:19.659-120><thread=8604 (0x219C)>
Phase: EncryptingFiles started.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:19.659-120><thread=8604 (0x219C)>
Progress: Item type: EncryptedFiles. Completed: 1. Total: 1~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.236-120><thread=8604 (0x219C)>
Progress: 100% (phase), 33% (total). ~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.236-120><thread=8604 (0x219C)>
Files are ready for upload for SCCM PackageId P01001B7. Folder 'C:\Windows\TEMP\SoftwarePublishing\5104_46\12189ee0-304b-494d-b1e2-f45a61200e0b'.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.236-120><thread=8604 (0x219C)>
Uploading metadata for SCCM PackageId P01001B7, Intune PackageId 2c9a7e42-85e4-41a2-8754-ae971be40808~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.252-120><thread=8604 (0x219C)>
Phase: UploadingMetadata started.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.298-120><thread=8604 (0x219C)>
Progress: 100% (phase), 50% (total). ~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.860-120><thread=8604 (0x219C)>
Uploading files for SCCM PackageId P01001B7, Intune PackageId 2c9a7e42-85e4-41a2-8754-ae971be40808~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.860-120><thread=8604 (0x219C)>
Phase: UploadingFiles started.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:20.860-120><thread=8604 (0x219C)>
Progress: 100% (phase), 66% (total). ~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.808-120><thread=8604 (0x219C)>
Upserting MDMContent table for SCCM PackageId P01001B7.~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.871-120><thread=8604 (0x219C)>
Upload is complete for SCCM PackageId P01001B7~~ $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.917-120><thread=8604 (0x219C)>
Successfully processed package ID P01001B7 for MDM distribution point ["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\. $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.917-120><thread=8604 (0x219C)>
~Successfully created/updated the package server in the data source. $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.933-120><thread=8604 (0x219C)>
STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_OUTGOING_CONTENT_MANAGER" SYS=SERVER.fqdn SITE=P01 PID=5104 TID=8604 GMTDATE=Di Apr 08 12:49:43.949 2014 ISTR0="P01001B7" ISTR1="["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="P01001B7" AID1=404 AVAL1="["Display=\\manage.microsoft.com\"]MSWNET:["SMS_SITE=P01"]\\manage.microsoft.com\" $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014
14:49:43.949-120><thread=8604 (0x219C)>
StateTable::CState::Handle - (2330:1 2014-04-08 12:49:43.949+00:00) >> (2331:1 2014-04-03 14:33:42.595+00:00) $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.949-120><thread=8604 (0x219C)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='7F6041B0-3EE2-427F-AB72-B89610A6331C' SID=2330 MUF=0 PCNT=2, P1='P01' P2='2014-04-08 12:49:43.949+00:00' P3='' P4='' P5='' $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.949-120><thread=8604
(0x219C)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1mdiw5qb.SMX $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.995-120><thread=8604
(0x219C)>
Successfully send state change notification 7F6041B0-3EE2-427F-AB72-B89610A6331C $$<SMS_OUTGOING_CONTENT_MANAGER><04-08-2014 14:49:43.995-120><thread=8604 (0x219C)>
I searched the log file in the company portal for the app name but i couldn't find anything.

How to Deploy exe application using SCCM 2012 SP1

Hi,
While creating deployment type wizard (for exe application deployment) , i am not able to see the "Windows Installer (native)" option in the drop down menu. Kindly refer snapshot. If i select "script installer" , deployment is not working.
I am taking it for adobe reader 9.1 exe application. Can anyone please suggest which option should i take.
Regards
Manish

I believe the thinking was that most people wrap their .exe in an .msi anyway, so that would have been way more common.
Really?
That seems bizarre to me. I guess, if this thinking occurred, it might have been based on the idea that lots of people are using Group Policy Software Installation (Intellimirror), since GPSI does a less-horrible job when you use MSI.
But, a lot of software I've seen, uses a setup.exe bootstrapper to launch one or more MSI's.
So, MSI wraps EXE wraps MSI would be the outcome of this thinking.
Which is why I chose the word... bizarre.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

MS Office Pro 2013 Deployment through SCCM 2012 R2

Hi Friends,
I have deployed MS Office Pro 2013 through SCCM 2012. But from Windows 7 Client Machines It's not Installing. Noticed following error in Software Center.
I'm testing two deployments before bring into production.
Test Machine 1 : Purpose = Available
From Software Center I have found Test Machine 1 is Status failed.
Test Machine 2 : Purpose = Required
From Software Center I have found Test Machine 2 is Status post due-will be retried
The following Error code is same for both Machines.
====================================================
The software change returned error code 0x87D00607(-2016410105).
====================================================
Any idea please .
Regards,Ali

Hi,
Check out this great guide from Ronni on how to deploy Office 2013 using Configuration Manager 2012, a good read.https://gallery.technet.microsoft.com/office/How-to-Deploying-Office-0f954e7f
Are the content succefully deployed to all DPs?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to manage Work group Computer through SCCM 2012 R2

Hello..Experts,
We have to manage the Workgroup Computers both Linux and windows Environment through SCCM 2012 R2.
what are limitation associated with managing Workgroup computer both with Linux and windows Computers through SCCM.
Please help us how to achieve this.

Windows devices that are Workgroup members have the same features for management as domain joined devices except that it is slightly more difficult to get the client installed on these 'unmanaged' devices.
The Linux computers have only basic support for Inventory, Application Management, and Compliance.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Found error while Deploying office 365 through SCCM.

Hello Experts,
We are currently working to deploy office 365 through SCCM but on client system it failed to installed.
found error in AppEnforce.log file.
Please help to resolved the error.

ConfigMgr is doing it's job and trying to install the application. However the installation times out after an hour.
See:
Waiting for process 5820 to finish.
That would suggest to me that there is something wrong with your installation parameters. The installation is probably not fully silent and is awaiting user input (that you cannot see).
Narcoticoo's advice is good. Try to install the app silently manually. Until you can do this successfully ConfigMgr will not be able to deploy it.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to deploy sca files and navigate to web services?

Hello All,
Installed SAP MDM 7.1 and also got sapmmc on my desktop.. Wondering how can I deploy sca files and how can I get web service navigator page to see web services? Any light on this?
Thanks
Rajeev

Hi,
Please find details below:
1. How to deploy SCA files:---> You need to deploy these .SCA files through JSPM on any JAVA AS server (7.0 or 7.1 depending upon .sca files version you have). make sure your MDM version should be minimum 7.1.02.51.
2. How to get webservice Page:--> To Access web service page using the following link
http://<Netweaver Java AS Machine>:<NetWeaver Java AS HTTP port>/webdynpro/dispatcher/sap.com/tcmdmwsgeneratorui/WSGenerator
For more details please check [this|http://help.sap.com/saphelp_nwmdm71/helpdata/en/45/018c03166a0486e10000000a155369/frameset.htm] link.
Regards,
Shiv

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

Hot to run "Deploy WSP" file through sharepoint Powershell from C# win Application

HI All,
I have create one web part (wsp) and also i have created one window application for deploy wsp file through powershell commands but i am stuck in executing the commands from powershell from c# win app .please let me know any have idea about
this ?
Software developer

Hi,
The following code snippet for your reference:
public string RunPowershell(string powershellText, SPWeb web, string param1, string param2)
// Powershell ~= RunspaceFactory - i.e. Create a powershell context
var runspace = RunspaceFactory.CreateRunspace();
var resultString = new StringBuilder();
try
// load the SharePoint snapin - Note: you cannot do this in the script itself (i.e. add-pssnapin etc does not work)
PSSnapInException snapInError;
runspace.RunspaceConfiguration.AddPSSnapIn("Microsoft.SharePoint.PowerShell", out snapInError);
runspace.Open();
// set a web variable.
runspace.SessionStateProxy.SetVariable("webContext", web);
// and some user defined parameters
runspace.SessionStateProxy.SetVariable("param1", param1);
runspace.SessionStateProxy.SetVariable("param2", param2);
var pipeline = runspace.CreatePipeline();
pipeline.Commands.AddScript(powershellText);
//add a "return" variable
pipeline.Commands.Add("Out-String");
var results = pipeline.Invoke();
//convert the script result into a single string
foreach (PSObject obj in results)
resultString.AppendLine(obj.ToString());
finally
// close the runspace
runspace.Close();
// consider logging the result. Or something.
return resultString.ToString();
More information:
Running Powershell from within SharePoint
http://geekswithblogs.net/Norgean/archive/2012/09/19/running-powershell-from-within-sharepoint.aspx
Best Regards
Dennis Guo
TechNet Community Support

Error while deploying EAR file through SDM

Hi All,
I am deploying EAR file through SDM. Its taking too much time to deploy in the 3rd stage (its just a simple hello file for testing purpose and its still in that stage for 2 hours).
When I see the log, I can see some fata error. Please suggest me what should I do.
==
Oct 15, 2008 4:31:44 PM Info: SDM started successfully.
Oct 15, 2008 4:33:21 PM Info: Opened client connection to sapretail (IP address
sapretail/172.20.177.203, remote port 58645)
Oct 15, 2008 4:33:23 PM Info: Request for Logon as admin accepted
Oct 15, 2008 4:39:07 PM Info: Loading archive '/usr/sap/trans/EPS/sap.comwdtu
torial~ex1.ear'
Oct 15, 2008 4:40:50 PM Info: Actions per selected component:
Oct 15, 2008 4:40:50 PM Info: Initial deployment: Selected development componen
t 'wd/tutorial/ex1'/'sap.com'/'LOKAL'/'0.2008.10.14.12.51.57' will be deployed.
Oct 15, 2008 4:44:41 PM Info: Saved current Engine state.
Oct 15, 2008 4:44:48 PM Fatal: State BeforeNextDeployment can't process event I
nitiateDeployment
The reason I am doing through SDM because while deploying through NWDS its throwing an error
Oct 13, 2008 12:44:41 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : sapretail
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/231477/LOCALS1/Temp/temp41002sap.comwdtutorial~ex1.ear
Deployment exception : Server sapretail did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server sapretail at port 50118: sapretail
Inner exception was :
Server sapretail did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server sapretail at port 50118: sapretail
Please suggest a solution.
Regards,
Jitender

Now, when I deploy through NWDS, I get the following error.
Result
=> deployment aborted : file:/C:/DOCUME1/231477/LOCALS1/Temp/temp51346sap.comwdtutorial~ex1.ear
Aborted: development component 'wd/tutorial/ex1'/'sap.com'/'LOKAL'/'0.2008.10.15.21.04.16':Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [sapretail] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

How to deploy .msp files through SCCM 2012

Similar Messages

Maybe you are looking for