How to deploy oracle 11g under cold failover cluster

Hi,
I am trying to install oracle 11g under failover cluster environments. I am trying to find some oracle documentation about it. But not able to find one. Can anyone help me. Please i need it badly.
we have two servers sun solaris 10. on which we have failover cluster being installed. one is active while one is passive. How can i install oracle 11g on this failover clusters. did i have to install oracle of shared SAN. what are the extra configuration i have to do please help
Also is it wise to install 11g warehouse with fail safe or use RAC.
regards
Nick
Edited by: Nick Naughty on Feb 1, 2009 4:02 AM

thanks alot for reply.
I am of the same point of view. but the machine i am working on is sun solaris 10 with two partitions finance and accounts which have been protected by a failed over machine having two partitions finance and accounts and i think you are right these are the same shared storage folder which are mounted on active machine as well as on passive machine.
Now my question is if i install oracle 11g on one machine without oracle cluster then sun cluster should be able to mount the database in case the primary machine fails.
I have tried hard to get some documentation on this top but nothing so far. please help
regards
Nick

Similar Messages

  • Oracle Infrastructure in Cold Failover Cluster

    Hello,
    I have browsed through the Oracle docs for High Availability, but I cannot find any information abourt achieving that CFC HA for OAS Infrastructura using RedHat EL AS and HP Serviceguard...
    Can anyone help me?
    thanks in advance, and best regards

    user7575753 wrote:
    I'm running OAS 10.1.2.2.0 on a windows 2003 server under a cold failover clustered environment and was wondering... Is it recommended to have one web application deployed in it's own separate instance? For example, webapp1 deployed to instance1 and webapp2 deployed to instance2? Or would it be better to have multiple web applications deployed to one instance?
    Thanks for any thoughts!I can say your configuration is ok for single instance failover . Once u like to make cluster and load balance , OAS hs managed and non-managed cluster.
    For Managed Cluster , you must setup either Oracle WebCache or F5 Big/IP . With regard to non-managed cluster, that means nothing required to share .

  • How to deploy Oracle Forms & Reports in Weblogic Server 11g (10.3)?

    Hi
    How to deploy Oracle Forms & Reports in Weblogic Server 11g (10.3)?
    Thanks

    Hi
    when i am going through your bleow link.
    I am not able understand the 3.3.1 step :2
    http://download.oracle.com/docs/cd/E15523_01/web.1111/e10240/basics.htm#i1010040
    edit this file in the Web Configuration,
    configuration of an application called "my_application" with a form module called "form=hrapp.fmx":
    can deploy only.fmx file ?
    if not how to find the realation between my_application and hrapp.fmx ?
    Thanks in Adavance
    Regards
    Ram

  • Oracle 10gR2 Installation on Cold Failover Cluster

    Installation document recuired for Oracle 10g R2 on Cold Failover Cluster in Redhat Linux 4 platform.
    Message was edited by:
    user491196

    user12974178 wrote:
    checking network configuration requirements
    check complete: The overall result of this check is : Not Executed
    Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
    However , the primary network Interface on the system should be configured with a static IP address
    in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
    software on systems configured with DHCP
    Could anyone help me in this regard
    Thanks in AdvanceYour problem is:
    "However , the primary network Interface on the system should be configured with a static IP address in order for the Oracle Software to function properly"
    Your solution is
    "See the Installation Guide for more details on installing the software on systems configured with DHCP"
    That book is at http://tahiti.oracle.com and the steps you need are in Chapter 2 of the Installation Guide for Linux.
    Now, I could assume this is Oracle 11gR2 and you are using Oracle Enterprise Linux 5 Update 4, but I won't. Assuming things gets me into trouble.

  • OracleAS cold failover cluster

    I am installing oracleAS cold failover cluster. but during installing a am getting error in database configuration
    assistant. can anybody help me?

    This is as simple as "Two heads think better that once", for this you will have two points (or more) of access to your applications, the process are split between servers and if one of the nodes fails, there are other to backup them. That's the only think that a Cold Fail Over cluster does, as well the administration is centralized if you have a nice configuration you will need to do only one configuration and all nodes will notice about it, finaly when you have a cold fail over cluster you have 50% of your potential workload in use, you have a server as a portrait that only is good to look at it but doesn't do nothing else, you dont need benchmarks or notes, this is really simple as it sounds.
    Greetings.

  • How to install Oracle 11g on linux from VNC

    Hi:
    I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
    under that I have
    Accept clipboard from viewers
    Send clipboard to viewers
    Send primary selection to viewers
    From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
    What is next? How do I connect to the server. (When I login I used hostname:1)
    BTW, when I click on "Start TightVNC service" from Start button, I got "Failed to start TightVNC service for the following reason: Access is denied(error code 5).
    The VNC on the linux server is running.
    Thankyou.
    Edited by: 907485 on Mar 21, 2012 7:21 AM

    907485 wrote:
    Hi:
    I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
    under that I have
    Accept clipboard from viewers
    Send clipboard to viewers
    Send primary selection to viewers
    From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
    What is next? How do I connect to the server. (When I login I used hostname:1)
    Thankyou.we only know what you post.
    where does linux reside?
    where is VNC installed?

  • Oracle 11g clusterware VIP failover failed

    I installed Oracle 11g Clusterware succesfully, without any errors as per link:
    http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnRHEL5UsingVMwareESXAndNFS.php
    After that,I did vip failover test
    I rebooted the node-2
    Before reboot,
    [root@advansrac1 bin]# ./crs_stat -t
    Name Type Target State Host
    ora....ac1.gsd application ONLINE ONLINE rac1
    ora....ac1.ons application ONLINE ONLINE rac1
    ora....ac1.vip application ONLINE ONLINE rac1
    ora....ac2.gsd application ONLINE ONLINE rac2
    ora....ac2.ons application ONLINE ONLINE rac2
    ora....ac2.vip application ONLINE ONLINE rac2
    After reboot,
    Name Type Target State Host
    ora....ac1.gsd application ONLINE ONLINE rac1
    ora....ac1.ons application ONLINE ONLINE rac1
    ora....ac1.vip application ONLINE ONLINE rac1
    ora....ac2.gsd application ONLINE ONLINE rac2
    ora....ac2.ons application ONLINE ONLINE rac2
    ora....ac2.vip application ONLINE UNKNOWN rac1
    [root@rac1 bin]# ./crs_stop ora.rac2.vip
    Attempting to stop `ora.rac2.vip` on member `advansrac1`
    Stop of `ora.rac2.vip` on member `advansrac1` succeeded.
    [root@rac1 bin]# ./crs_stat -t
    Name Type Target State Host
    ora....ac1.gsd application ONLINE ONLINE rac1
    ora....ac1.ons application ONLINE ONLINE rac1
    ora....ac1.vip application ONLINE ONLINE rac1
    ora....ac2.gsd application ONLINE ONLINE rac2
    ora....ac2.ons application ONLINE ONLINE rac2
    ora....ac2.vip application OFFLINE OFFLINE
    [root@rac1 bin]# ./crs_start ora.rac2.vip
    Attempting to start `ora.rac2.vip` on member `rac2`
    Start of `ora.rac2.vip` on member `rac2` succeeded.
    [root@rac1 bin]# ./crs_stat -t
    Name Type Target State Host
    ora....ac1.gsd application ONLINE ONLINE rac1
    ora....ac1.ons application ONLINE ONLINE rac1
    ora....ac1.vip application ONLINE ONLINE rac1
    ora....ac2.gsd application ONLINE ONLINE rac2
    ora....ac2.ons application ONLINE ONLINE rac2
    ora....ac2.vip application ONLINE ONLINE rac2
    I have only 1.5G on each node
    Here the issue is,
    1. Actual Result: # During failover why it is showing UNKNOWN state for ora.rac2.vip on member rac1
    Expected Result: # During failover,it have to be ONLINE state for ora.rac2.vip on member rac1
    2. I have to start ora.rac2.vip manually, when node-2 is up.I want VIP fail over have to happen automatically when node-2 is up to normal online state.
    Help me out from this issue

    VMware is unsupported but that is likely not your issue.
    1. Run cluster verify and report the results
    2. Did you create a failover service? How?
    3. Post your TNSNAMES.ORA

  • How to deploy oracle forms in weblogic server

    Hi,
    I have a 10g forms. How to deploy this oracle form in weblogic 11g?. I am new to this weblogic. I think this combination is new to weblogic(weblogic with forms). i configured the weblogic 11g in my machine and i have admin server only. And also I have .fmx(i.e executable version of form).how to use this .fmx to deploy in weblogic?This executable work fine in OAS. What need to be done for deploy this form in weblogic. Can anybody provide the solution for this ASAP?
    Edited by: user11337450 on 10-Sep-2009 02:11
    Edited by: user11337450 on 10-Sep-2009 02:13

    this might help.
    http://download.oracle.com/docs/cd/E12839_01/web.1111/e10240/basics.htm
    I am deploying forms in weblogic, too. Can you tell me how did you upgrade forms from 10g to 11g? Did you install HTTP Aphace server seperately or it come with weblogic server or Orcale portal, forms installation. any input will be appreciated.

  • How To Determine Oracle 11g Issues

    Is there a script or way I can run a health check or data integrity on a Oracle 11g R2 (11.2.0.3) database server I don't own or have any experience with? I'm being handed a 11.2 11g Enterprise Edition & would like to see what the state of the database is and the included data. Is there somewhere I can start or some kind of script I can run to determine if this machine is doing well or needs specific attention?

    CarlosinFL wrote:
    I'm not sure how else to state this but if you were given a database server you didn't configure or use, you would like to know if there are invalid schema entries, What is an invalid schema entry?
    critical database operational errors, Presumably, those would be logged in the alert log
    performance problems, It's impossible, in general, to script that. You'd need to know what the performance requirements of the system are. You can run an AWR/ Statspack report and see that, for example, the server has been under heavy load. But it's impossible for a script to differentiate between "everything is operating as expected, the system is well tuned so that we can use as much of the hardware as possible" and "oh crud, response times just went through the roof and users are lighting up the phones with complaints"
    loads of junk in the recycle bin, etc etc etc...Why do you care what's in the recycle bin? That's just space that Oracle is free to use when it needs to use it, there is no harm in having tons of objects and data in the recycle bin.
    I have no experience with this server so I would like to analyze it and find out what / where attention is needed.That generally requires conversations with the users that depend on the system and the documentation around the system as much, if not more so, than running scripts against the database. You'll want to see what the written backup and recovery plan is, for example, and you'll probably want to verify that you can follow the plan and recover the last set of backups. No script is going to be able to tell you whether the last set of backups are recoverable, how they were taken, whether the documentation is up to date, whether the plan itself is reasonable, etc. You'll want to talk with users to understand how they use the system, what the performance requirements are, what problems, if any, they have, etc. Depending on the organization, that may involve looking at the bug tracking/ issue tracking/ ticket tracking application(s), it may involve conversations with humans, etc.
    Justin

  • How to Install oracle 11G Solaris 10 NO GUI using command line

    Hello
    I need to install oracle 11G R2 on Solaris 10 but cant use interactive mode i tried the following
    /runInstaller -silent -force -debug FROM_LOCATION="/var/tmp/oracle/database/stageproducts.xml" ORACLE_HOME="/oracle/product"
    As per oracle metalink documentation - however i get the following messages
    [SEVERE] - My Oracle Support Username/Email Address Not Specified
    has anyone installed oracle with no interactive mode how can i do so ?
    thank you

    Have you followed the needed steps in the Install Guide ? http://download.oracle.com/docs/cd/E11882_01/install.112/e17163/app_nonint.htm#BABFEECI
    HTH
    Srini

  • How to monitor oracle 11g database sessions on Windows 2008 server?

    Hi Experts
    How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

    Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence.  i never tested it but seems impresive.  It is free and i think it would be use ful to you.
    http://myorasql.com/
    You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

  • How to install Oracle 11g R2 Express Edition in Arch 64?

    Does anybody know how to do that?
    The AUR website has a package for the beta version of Oracle 11g R2 Express Edition (https://aur.archlinux.org/packages.php?ID=48366), but somebody commented that it had some problem.
    After a few months, I think it's easier to install centos 6.2 in a virtual box and install Oracle 11g there.
    Last edited by dxxvi (2012-06-06 20:57:36)

    By default Chinese language will be selected, you can also add english language from the left panel where you find list of languages. Then drag drop English to right panel and click next to continue with your installation.

  • How to set Oracle 11g as Primary Oracle Home

    Hi All,
    I've Windows 7 operating system & have Oracle 11g client ( enterprise edition), Oracle 10g XE and Oracle Developer Suite 10g. I want to know how can I set Oracle_11g_home as my primary oracle home.
    Note: Currently, the home of Oracle Developer Suite 10g is my primary home as it gets invoked whenever I type sqlplus in the command prompt or tnsping my remote database from command prompt.
    Regards,
    MK

    You have two options. Either edit your %PATH% environment variable and place the Path related to your 11g home first. Another option is to add an ORACLE_HOME environment variable that points to your 11g home.
    Hope this helps!

  • How to connect Oracle 11g in CF9 using tnsnames

    Hi, I'm using CF9 running on Solaris and I just had Oracle 11g installed using tnsnames. Can someone explain to me how to add the Oracle string in CF admin? I have confirmed that I can connect to the database but I don't think I have the correct syntax for connection string. I think it should be similar to the following: jdbc:datadirect:oracle:TNSNAMES_FILE=/d01/oracle/product/v.11.2.0.3_client/network/admin/ tnsnames.ora:@dbserver.com:1549:SIDname;driver=oracle.jdbc.Oracle
    Does anyone have an idea?
    Thanks in advance

    I have Oracle client installed on the web server with Oracle database installed on separate server. When I add DSN and SID, I get the following error:
    Connection verification failed for data source: dsn_test
    java.sql.SQLNonTransientConnectionException:[Macromedia][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (SID_NAME) was not recognized by the Oracle server.
    The root cause was that:java.sql.SQLNonTransientConnectionException:[Macromedia][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (SID_NAME) was not recognized by the Oracle server.
    Any ideas?

  • How to uninstall Oracle 11g from windows xp professional version 2002 SP3

    Hi Peers
    I didn't know that, it's complicated to remove oracle and I was messed up with files&folders to uninstall and I'm lost :(
    can any one help me out uninstalling oracle 11g completely from windows?
    anyone's help would be greatly appreciated, hope will get out of this mess
    Thanks a lot in advanced
    Chowdary

    yes, I know that I have installed OBIEE and those services related to OBIEE
    my main objective is to install OBIEE and for that I got to install oracle database, I did install both database and OBIEE then I didn't find any database to use for OBIEE (silly right :P). yes, that is true and I'm lost
    what to do now?
    Found easy way is re-installing, I tried uninstalling both and not sure whether database was deleted or not, the same case with OBIEE
    what I'm asking you is, "HOW TO ENSURE THAT I HAVE NO ORACLE DATABASE ON MY SYSTEM?"
    Don't take me the other-way, I'm very new with Oracle products
    Thanks for the patience & time of course :)
    Awaiting for your valuable response
    Edited by: 941958 on Jul 30, 2012 7:17 PM

Maybe you are looking for