How to deploy OS via SCCM to Hybrid RAID drives (500GB+32GBFlash) on EliteBook 820 G1

Can someone please help me to deploy the OS to a EliteBook 820 G1. I have imported the "HP Client Computer Windows PE 3.0 x86 and x64 Driver Pack" into my boot image but it is still failing just after partitioning\formatting.
If I boot to the Windows CD (from USB as there is no CD ROM) that comes with the laptop then I can see that my Drive has been formatted (has name from my TS) but I have an error that states: "Windows can not be installed to Disk 0 Partition 1 (Show Details) - Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I then grabbed the WINPE driver pack from HP and tried to load the RAID driver manually but it even though it shows the driver is compatible I still get the same error.
I have also imported these drivers into my Boot Image in SCCM and tried to add it to the TS as well..
Any help would be great as I really need to get these deployed urgently.. Thanks!

Hi:
You may have better luck getting an answer to your question on the HP Business Support Forum -- Elitebook notebooks section.
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274#.U2OaJOlOW9I

Similar Messages

Deploy Smartview via SCCM 2012

I have tried everything - even calling for support which got me nothing!
How do you deploy Smartview via SCCM? What command line works? All their docs S-U-C-K and do not work!

Hi,
Am not very sure of this as i work on Hyperion but not on SCCM. but you can give a try to check with your SCCM team with below command. We have mst developed which updates the registry keys so my command looks like below.
msiexec /i "D:\OracleHyperionSmartViewforOfficeFusionEdition.msi" transforms="D:\OraHyperionSmartVw_111210_00.mst" /qb!
if you dont have mst then you can use something like msiexec /i "D:\OracleHyperionSmartViewforOfficeFusionEdition.msi" /qb!
Hope this helps.
Thanks
Amith

Deploying fonts via SCCM 2012

I'm needing to deploy a set of fonts to all of our existing workstations using SCCM 2012 if possible. I'm not looking to enforce these fonts to be set as the default on any applications just need to get them installed on the workstations. Any suggestions
or feedback is appreciated.
Thank You

More info:
Install Fonts For Logged On User via SCCM Package
http://blog.cjwdev.co.uk/2011/06/12/install-fonts-for-logged-on-user-via-sccm-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to deploy a file on all users C drive via group policy

I'm trying to deploy a file on all users C drive via group policy but its not working. logon script is already kept in place but nothing is happening. If I run the same command from my pc it's working fine. Does any one have good script to copy & deploy
the file. Pls help

Hi,
You can use Group Policy Preferences to deploy this and Item-level-Targetting to filter by OUs/groups, wmi filters ,etc.
Computer Configuration / User Configuration - Preferences - Windows Settings - Files
More on this here.
http://technet.microsoft.com/en-us/library/cc772536.aspx
Hope this helps.
Regards,
Calin

How to deploy Photoshop/Premiere Elements 13 with SCCM 2012 r2?

Hi there
I want to create a .msi package of Photoshop/Premiere Elements 13 for SCCM 2012 r2. Can me anyone give a tutorial or a tip?
thx

If you want to deploy lync by SCCM, you may utilize config.xml to do that. All the things you want to configure, you may find it can be achieved in config.xml
Run the install by using the following command line:
<path>\setup.exe /config <path>\config.xml
http://technet.microsoft.com/en-us/library/jj204651.aspx
How to deploy application by SCCM.
http://technet.microsoft.com/en-us/library/gg682082.aspx
Juke Chou
TechNet Community Support

How to deploy MS Visio & MS Project via SCCM 2012

Dear friend,
Please let me know the How to deploy MS Visio & MS Project via SCCM 2012, step by step
Thanks

You need to utilize Office Customize Tooltik to build config.xml, then distribute the config.xml with setup file. Below are some documents talking about this.
http://blogs.msdn.com/b/visio/archive/2011/02/04/more-on-visio-2010-volume-deployment.aspx
http://blogs.technet.com/b/odsupport/archive/2010/12/03/volume-license-editions-of-visio-2010-install-premium-edition-by-default.aspx
Juke Chou
TechNet Community Support

How can i deploy plugins for Firefox via SCCM

Hello All,
I've been asked to deploy some plugins for all our users (namely AdBlock, FireIE and NoScript) across the whole domain. We'd like to do this via SCCM as it is centrally managed and works the best for our environment, plus with people being offsite a lot we can also control and deploy through our VPN solution.
I've read many sources and found that it's not really centrally manageable (currently) or so straightforward. I've found a way to create a deployment that include the plugins which is sufficient in terms of deployment but not ideal, however the main problem is the automatic deployment of settings for the plugins. For example, in the FireIE plugin we have a number of internal websites that use SSO and having the ability to use these within Firefox is extremely advantageous not only for security reasons but also in terms of performance. I can export and import settings but don't want to have to do this for every single user as it would take an awful long time.
Is there a simple way to create a deployment in SCCM (whether it be MSI based, script based, whatever) that would allow this to happen.
All help is greatly appreciated!

Check out the ESR community they will have better advice.
Other resources:
*[https://developer.mozilla.org/en-US/Firefox/Enterprise_deployment]
*[https://developer.mozilla.org/en-US/docs/Deploying_a_Plugin_as_an_Extension]

Deploying Office 365 Pro Plus via SCCM

Hi
I am trying to deploy Office 365 Pro Plus via SCCM, I followed this process https://gallery.technet.microsoft.com/How-To-Deploying-Office-70e8b1eb#content , we don't use the application catalogue but I made the application available to be run via system
center.
Though can't get it deployed, I keep getting some errors about checking internet connections ...though I can run the command manually and it'works.
Does anyone managed to install it via SCCM ?

Thank you for the reply,
Where I am lost is where it downloads the Office C2R from ?
Logs from the Temp folder
03/04/2015 10:51:15.947 SETUP (0xf10)
0x107c Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
03/04/2015 10:51:16.228 SETUP (0xf10)
0x107c Click-To-Run
aoh9t Medium
TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" productreleaseid="none"
displaylevel="False" culture="en-us" baseurl="C:\WINDOWS\ccmcache\5l" lcid="1033" platform="x86" updatesenabled="False" o365proplusretail.excludedapps="access,groove,lync,project,sharepointdesigner,visio"
version="15.0.4675.1003" productstoadd="O365ProPlusRetail_en-us_x-none" trackedduration=280
03/04/2015 11:01:12.393 SETUP (0xf10)
0x107c Click-To-Run
aoh72 Medium
ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
Logs from SCCM AppEnforce shows this (can't see it failing)
<![LOG[+++ Starting Install enforcement for App DT "Install - Microsoft Office 365 ProPlus" ApplicationDeliveryType - ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision - 7, ContentPath
- C:\WINDOWS\ccmcache\5l, Execution Context - System]LOG]!><time="10:50:45.222-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:1702">
<![LOG[ A user is logged on to the system.]LOG]!><time="10:50:45.243-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2083">
<![LOG[ Performing detection of app deployment type Install - Microsoft Office 365 ProPlus(ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, revision 7) for system.]LOG]!><time="10:50:45.247-600"
date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2148">
<![LOG[+++ Application not discovered. [AppDT Id: ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision: 7]]LOG]!><time="10:50:45.287-600" date="03-04-2015" component="AppEnforce"
context="" type="1" thread="5596" file="localapphandler.cpp:291">
<![LOG[ App enforcement environment:
Context: Machine
Command line: Setup.exe /configure Install.xml
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 1
Content path: C:\WINDOWS\ccmcache\5l
Working directory: ]LOG]!><time="10:50:45.288-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcontext.cpp:85">
<![LOG[ Prepared working directory: C:\WINDOWS\ccmcache\5l]LOG]!><time="10:50:45.290-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcontext.cpp:189">
<![LOG[ Prepared command line: "C:\WINDOWS\ccmcache\5l\setup.exe" /configure Install.xml]LOG]!><time="10:50:45.340-600" date="03-04-2015" component="AppEnforce" context="" type="1"
thread="5596" file="appcontext.cpp:338">
<![LOG[ Executing Command line: "C:\WINDOWS\ccmcache\5l\setup.exe" /configure Install.xml with user context]LOG]!><time="10:50:45.341-600" date="03-04-2015" component="AppEnforce" context=""
type="1" thread="5596" file="appexcnlib.cpp:201">
<![LOG[ Working directory C:\WINDOWS\ccmcache\5l]LOG]!><time="10:50:45.341-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:215">
<![LOG[ Post install behavior is BasedOnExitCode]LOG]!><time="10:50:45.529-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcommon.cpp:1094">
<![LOG[ Waiting for process 3856 to finish. Timeout = 120 minutes.]LOG]!><time="10:50:45.533-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596"
file="appexcnlib.cpp:1958">
<![LOG[ Process 3856 terminated with exitcode: 0]LOG]!><time="11:01:12.428-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:1967">
<![LOG[ Looking for exit code 0 in exit codes table...]LOG]!><time="11:01:12.429-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:505">
<![LOG[ Matched exit code 0 to a Success entry in exit codes table.]LOG]!><time="11:01:12.430-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:584">
<![LOG[ Performing detection of app deployment type Install - Microsoft Office 365 ProPlus(ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, revision 7) for system.]LOG]!><time="11:01:12.621-600"
date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2148">
<![LOG[+++ Application not discovered. [AppDT Id: ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision: 7]]LOG]!><time="11:01:12.739-600" date="03-04-2015" component="AppEnforce"
context="" type="1" thread="5596" file="localapphandler.cpp:291">
<![LOG[++++++ App enforcement completed (627 seconds) for App DT "Install - Microsoft Office 365 ProPlus" [ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479], Revision: 7, User
SID: ] ++++++]LOG]!><time="11:01:12.748-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2448">

Deploying MBAM 2.5 via SCCM 2012R2 with minimal interaction.

Is it possible to deploy Bit-Locker encryption in a zero/minimal touch installation? I need to replace the current encryption solution on a good amount of devices and need to get them turned around and back to the users ASAP. I am still working on the back
end infrastructure but am trying to plan ahead.
In a perfect world my deployment would be as follows;
1. Deploy the client via SCCM to devices connected to the LAN and have it reboot automatically after installed.
2. Have an answer file that sets an administrator PIN answers all prompts and initiates encryption.
3. Users boot their devices and are prompted to create a PIN.

Have you already solved how you will decrypt and uninstall current security solution silently? I bet it is the hardest part here. Then you just push MBAM Client and set encryption enforcement via GPO. I don´t see any point of having PIN answer file. PIN
code is something which user owns, there is no sence admin to set it. If you want to apply PIN, you have to promt the user to enter it. But this is just my opinion. Good luck :)

How to launch IE window via SCCM 2012 R2

Hi,
we need to open / launch Internet Explorer windows at a specific time everyday on the computers of a specific collection.
How it could be achieved? Is this possible via SCCM? or it could be done via GP? What is recommended? Or with MS Orch?
Please assist.
Regards, Syed Fahad Ali

You could do this with ConfigMgr ...
You can launch IE like this %programfiles%\Internet Explorer\IEXPLORE.EXE http://www.cnn.com
Just create a batch file with all pages you'd like to open and deploy it with ConfigMgr.
If timing is an issue ... you'd probably be better of with a scheduled task (which you can also implement using ConfigMgr).
Tim | Blog |
@Tim_DK

Problem deploying OS via PXE - SCCM 2012 R2

Unable to deploy OS via PXE. This is what I'm getting on the unknown client machine when initializing PXE:
Downloaded WDSNBP from "IP"
Architecture x64
The details below show the information relating to the PXE boot request for this computer. Please provide these details to your Windows Deployment Services Administrator so that this request can be approved.
Pending Request ID: 13
Message from Administrator: Configuration Manager is looking for policy.
Contacting Server: "IP"
TFTP Download: smsboot\x64\pxeboot.com
Press F12 for network service boot
PXE-M0F: Exiting Intel PXE ROM
Operating System not found
Here are the entries in the SMSPXE.log file when I PXE boot the client machine. It stays at "Looking for bootImage"
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="09:12:33.711+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="libsmsmessaging.cpp:6346">
<![LOG[00:50:56:80:10:C0, 82760042-6D77-B44D-A365-52574A518CCB: device is not in the database.]LOG]!><time="09:12:33.711+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028"
file="database.cpp:483">
<![LOG[Getting boot action for unknown machine: item key: 2046820352]LOG]!><time="09:12:33.711+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="pxehandler.cpp:231">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>7ecc18a2-e0a0-4f63-a1e1-418366a7289f</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="DCC2000E" OfferIDTime="1/13/2014 8:11:00 AM" PkgID="DCC0001B" PackageVersion="" PackagePath="http://vmsccm001.dcci.internal/SMS_DP_SMSPKG$/DCC0001C"
BootImageID="DCC0001C" Mandatory="0"/></ClientIDReply>
]LOG]!><time="09:12:33.802+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="libsmsmessaging.cpp:6544">
<![LOG[00:50:56:80:10:C0, 82760042-6D77-B44D-A365-52574A518CCB: found optional advertisement DCC2000E]LOG]!><time="09:12:33.803+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028"
file="database.cpp:483">
<![LOG[Getting boot action for unknown machine: item key: 2046820353]LOG]!><time="09:12:35.821+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="pxehandler.cpp:231">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820353" ServerName=""><Machine><ClientID>44fa2ff5-160c-4896-bc9b-397c10e4414b</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="DCC2000E" OfferIDTime="1/13/2014 8:11:00 AM" PkgID="DCC0001B" PackageVersion="" PackagePath="http://vmsccm001.dcci.internal/SMS_DP_SMSPKG$/DCC0001C"
BootImageID="DCC0001C" Mandatory="0"/></ClientIDReply>
]LOG]!><time="09:12:35.919+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="libsmsmessaging.cpp:6544">
<![LOG[00:50:56:80:10:C0, 82760042-6D77-B44D-A365-52574A518CCB: found optional advertisement DCC2000E]LOG]!><time="09:12:35.919+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028"
file="database.cpp:483">
<![LOG[Looking for bootImage DCC0001C]LOG]!><time="09:12:35.919+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="bootimagemgr.cpp:1774">

The TS is deployed to the All Unknown Computers group. The client machine I'm trying to install the OS is a VM with no OS currently installed so I'm assuming SCCM would see it as an Unknown Computer. How would I verify that SCCM doesn't currently
hold any data for this client?
Also, I noticed the following in the SMSPXE log: <![LOG[Client boot action reply: <ClientIDReply><Identification
Unknown="0"
Does Unknown="0" mean SCCM is not recognizing the client as being unknown?

Lync 2013 client deployment via SCCM with silent uninstall of Communicator / Live Meeting / Plugin

Hi
We are rolling out Lync 2013 across our org to many remote sites and are wondering the best approach for this.
We hope to leverage our SCCM, but so far we've only been installing Lync manually in our local test group.
I noticed that when installing Lync, it doesn't remove Communicator, Live Meeting, or the Live Meeting plugin for Outlook though.
Ideally, we would want to be able to push Lync 2013 client (standalone version, not Office 2013 Suite) via SCCM as well as uninstall Communicator 2007 R2, Live Meeting 2007 and Conferencing Add-in for Microsoft Office Outlook, all silently. Whether this
can be done while the user is logged in and using Outlook/Communicator, I am unsure (probably not), so doing this overnight with users logged off but machines on would probably work best.
Is there any documentation / guides from MS or other blog sites that have gone through this same process? From the searching I've done, it doesn't seem to be too common for a large deployment / jump from OCS 2007 to Lync 2013 on-premise.

Hi,
refer to this article it might help
http://social.technet.microsoft.com/Forums/lync/en-US/cf9ca58c-b9e8-465c-afb4-ed3992092f81/lync-2013-client-silent-installation
also did you try using Group Policy?
http://blogs.technet.com/b/mir/archive/2011/06/04/how-to-automate-lync-client-2010-deployment-in-multi-architect-environment-using-active-directory-group-policy.aspx
hope this help
If you find this helpful
please click "Vote as Helpful" if it answered your question please click "Mark as Answer"
Mostafa Eltohamy
Blog: http://Lyncdude.com Twitter:
LinkedIn:
XING:

Deploy all the security patches via sccm

I have adobe reader 10.1.4 in my enviorment.
I wanted to deploy all the security patches via sccm. Can i deploy this (Check the link below) msp file instaed of deploying all the patches individually?
Link :: http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Also, after installing the patch, how can i verify theat the latest security patches has been deployed?

Hi Arnav,
You need to start with the Admin Guide which provides all your answers. The short answer is quarterly updates are cumulative and they install previous security out of cycle patches. However, read the admin guide to get the full story. There's also a SCUP catalog available.
http://www.adobe.com/devnet-docs/acrobatetk/
HTH,
Ben

Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

App gets runtime error 429 when deploying via SCCM

I have an application I'm trying to deploy and it works fine when manually running the app (silently) on my test machine. When deploying it from SCCM and then trying to run the program you get a message saying "Run time error 429 - activex component
can't create object".
I can silently run the exe for the app from a command prompt. I can also do the same if I use the programs MSI file instead.
If I use the exe, msi or batch from SCCM it fails. I've tried deploying when a user is logged in or logged off.
One of the frustrating issues is I have been able to make it work on some systems, but not all. It fails more often than not. I'm wondering if it has something to do with a windows update (maybe .net framework) that isn't the same on each system.
I have already checked logs and haven't been able to find anything.
Any ideas?

What the command-line does is up to the command-line and really has nothing to with ConfigMgr. You'll have to check with the vendor about what's going on. Error code 429 is not a standard Windows error code. You could add logging to your command-line to
maybe get more details about what it cannot successfully do (how to do that is specific to your command-line and also has nothing to do with ConfigMgr).
The only idiosyncrasy with running something in ConfigMgr is that it uses the local System account. This can have implications if the installer is expecting to add things to a normal user profile (which is generally bad thing for installers to do but
they sometimes do it anyway). You can simulate this by using psexec with the -I and -is parameters. Given that this is an ActiveX control, which I think may be user specific, this could the source of the issue.
Another thing possibly at play is that IE is open. Since the installer is running as local System, it doesn't know this and tries to install the ActiveX control but can't because there are instances of IE open.
There's really no way to know what's failing here with additional information about what the command-line is actually doing and failing to do.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to deploy OS via SCCM to Hybrid RAID drives (500GB+32GBFlash) on EliteBook 820 G1

Similar Messages

Maybe you are looking for