How to deploy two different startups on cRIO

Hello,
I never needed to do it, but now I have to.
I need to have two versions of startup applications on my cRIO 9075. How can I do it. I tried to create two folders with different versions of applications and simply change the folder name of the application I want to run. Should it run?
Thank you,
Przemek

Hi Przemek,
I am not sure what the main goal of your application is, and what is your need for two startup applications, so I will make an asumption that you would like to use the cRIO with two different "personalities" for different use cases (if I am mistaken, please indicate that it is so).
In that case probably an online code change design might be just the right fthing for your application. This would encorporate creating a "framework" application, that would be calling the application instance that you would like to use currently.
Best regards,
Jano

Similar Messages

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • How to call two different servlet-url in the same application

    Hi,
    I want to call, consecutively these methods in my application.
    response.sendRedirect(servlet-url1)
    reponse.sendRedirect(servlet-url2)
    but the second method dont answer,
    I think, the first method redirect s with response ,
    but how to call two different servlet ?
    thanks

    if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

  • How to Maintain two different prices for same material in different qty?

    Dear all,
    How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
    (Vendor is supplying quantities in 2 different batches & also in different prices)
    Expecting valuable reply.
    Jeyakanthan

    In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
    In info record it is not possible to have different prices for the same period, except for scales.
    so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
    Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

  • How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

    How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

    Or choose Window > Arrange > Tile
    And, you of course can copy/paste without tiling.

  • How to merge two different images in photoshop?

    I am new here. I am starting to learn photoshop.How to merge two different images in photoshop? Please guide me. Thankyou.
    http://www.nissiinfotech.com/

    SPAM

  • How to change two different iCloud account from mac and iPhone?

    How to change two different iCloud account from mac and iPhone?

    Pick one to use, abandon the other.

  • How can i deploy two different versions of the same application on the same server??

    I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

    Hi
    You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
    Cheers
    -pradeep

  • SBO - How to use two different Stock Account within the same Item Group

    Hi,
    I'm currently stuck within one of my implementation.
    I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
    My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
    Do you have any clue so i can please them and keep using at the same time the item group ?
    Thanking you in advance
    Stephane

    Hi,
    In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
    As such, we can, somehow handle two different chart of accounts.
    In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
    Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
    1 - Duplicate the HQ accounts
    In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
    2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
    Regards
    Stephane

  • How to add two different database connections on Model

    Hi,
    In my application, I need to create View Objects on different databases. So I need to add two different database connections on the Model.
    But it seems like Model can be connected to only one database. I tried adding another project to add the second db connection. But after I created a read-only View Object in the second project, it didn't generate corresponding data control in the Data Controls panel.
    Could anyone help me on this?
    Thanks!

    Do you mean adding the second project folder in ViewController->Project Properties->Libraries and Classpath?Yes, either that or: ViewController -> Project Properties -> Dependencies
    And I didn't see the first Model project in the ViewController classpath. Otherwise it wouldn't work. The first model project IS in 'classpath'. Here's how:
    ViewController -> Project Properties -> Dependencies
    I tried this and recreated the View Object. Still didn't generate the datacontrol. No idea why you had to recreate the VO.
    Is your VO in an application module inside the SECOND project?
    After you are sure that everything is in the ViewController's classpath, just try restarting JDeveloper.
    This is very basic. has to work.

  • How to use two different network cards on RT?

    Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
    So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
    For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
    Thanks for your help!
    Solved!
    Go to Solution.

    Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
    As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
    Thanks

  • How to use two different versions of Firefox at the same time on Snow Leopard?

    I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
    Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
    Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
    If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
    How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
    Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
    Thanks for a great browser!

    Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
    You can find instructions on this page:
    http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
    '''A small tip:'''
    If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
    Firefox\ 3.6.15
    I hope that helps someone.
    WW

  • How to use two different ojdbc14.jar for two web application.

    Hi,
    I have two web application running in same tomcat, I need to use the two different ojdbc14.jar for two application, now both are taking the jars from tomcat common/lib directory, I tried copying the new ojdbc14.jar in web-inf/lib folder of one application, but it is not working.
    Could you please let me know whether this will take the jar from tomcat by befault or from web-inf, and a solution how to proceed with this.
    Thanks in advance.

    Yes, I tried removing the jars from common/lib, but as the connection string is mentioned inside the server.xml it is showing db connection error while trying to connect to the database

  • How to enter two different ED% in J1ID

    Hi All,
    For a single material code which is having two different ED%, how to enter Exceptional ED% in transaction code J1ID.
    For ex: Material no. XYZ is procured with material type 123 and 789 which is having different ED% of 8.13% and 8.14%.
    Regards,
    Ram

    There cannot be two different material type for same material code.
    Pl check & confirm.
    Regards
    Bhavesh Mistry

  • How to create two different implementation class for a Control

    Hi,
    I am a newbie to beehieve. I want to know that is it possible to create two different 'Impl' classes for a Control. If yes then how do we instantiate them ? How can we chain them (something like calling one 'Impl' from the other one? Thanks in Advance!!!
    Regards,
    Abhishek

    You are sure you are in the right forum?
    This is the JDeveloper and ADF forum...
    Timo

Maybe you are looking for

  • Video input with iMac 24"

    Ever since the 27 inch came out and announce the ability to input a signal via mini displayport I've been researching on how exactly this works. The majority of people are saying that it is a feature that only the 27 inch offers but there are two sit

  • Menu has 19 items...and it is not allowed???

    So i have 17 videos on a menu page plus Main Menu and Play all Adobe throws a error saying it only allows 18 items on a page So i am thinking making another additional page before it ...a page that has three buttons  Play all     go to 17 videos   ma

  • Information broadcasting not working in prod

    Dear All, have anybody my kind of situation? I have 2 box of BW system.. 1 box is for the development and QA and the other box is for production system... when I create and run the information broadcasting in dev and QA it works perfectly.. but when

  • Pathfinder Divide and white lines

    Hi guys, just 2  questions 1 - I did a simple illustration by constructing eyes with circles and croping areas with Divide tool in the Pathfinder Palette. http://www.pixentral.com/show.php?picture=1Bmm4LEGSljTvykkAx1L16fsq2hi Nevertheless, when i imp

  • Doubt with index hint

    I have a doubt with applying the index hint to fire for multiple coulmns in a query. For a single column, it is ok like:- select /*+ index( ppbS_inv_sim_serial iss_status) */ item_type_id, status, city from ppbS_inv_sim_serial where status='IT'; ther