How to descreen on a canoscan lide 100?

I have the canoscan but am not using the MP Navigator software
that came with it. I am just using the simple driver that I guess
is with the scanner.
I see no options to descreen.
Any ideas?
thx
deb

If you are using Image Capture then even if you selected the 'Show Details' button there is no Descreen setting. The only time I see Descreen with my LiDE200 is when I use MP Navigator and select to open the image with the scanner driver and then select the Advanced Mode.

Similar Messages

CanoScan LIDE 100

I just connected a Canoscan LIDE 100 to my MacPro.
Is there a way to get this scanner to scan directly into or through the Photoshop interface?
(example: File > Import > Canoscan LIDE 100)

I realize this is an old post but I am having the same problem. i have searched canon's site and
cannot find a driver, etc. to make this scanner scan directly into photoshop.
any suggestions?
thx
deco

Canoscan LIDE 100 platen not moving

My canon LIDE 100 scanner was working perfectly, but after a recent move, stopped. The scanner is present in About my Mac, and responds to calls but makes a short grinding noise and then a driver communication error pops up. I tried the scanner under Windows 7 in Parallels Desktop with the same results. I would chalk this up to a hardware problem, but I had a LIDE 35 last year that I chucked for the same reason. Any ideas? thx!!!
coocoo

The LiDE scanners have a lock switch underneath. These are On from factory and have been known to move enough to lock the contact sensor when transported.
If the lock is Off then it does sound like a hardware problem - again

How do I get a Canoscan Lide 600f to work?

I installed the latest software from the Canon site:
1) CanoScan Toolbox utility (5.013), followed by
2) the ScanGear CS driver (12.13.0)
and restarted the MBP (which is running 10.5.7).
Image Capture recognises the scanner, and shows the image to be scanned - but the scan button remains greyed out. What am I missing here? Any ideas would be much appreciated!

With the overview of the image displayed, you need to select a portion of that image so that the Scan button will become available.
To select a portion of the image, move your mouse to the top left corner of the image. Click the mouse and hold down. Then drag the mouse to the bottom right corner of the image and release the mouse. Now the Scan button will be available to click.
Pahu

CanoScan Lide 100 software

I bought a canon portable scanner and wonder if there is another software program
I could use with it that is more Mac-user efficient. The scanner came with an MP Navigator
program that is not great.
thx
debcoo

The Image Capture application that came preinstalled on your MBP can be used for scanning and has a simple interface. If you seek a professional-level scanning application, consider Hamrick Software's VueScan. It supports your scanner and hundreds of others.

Twain Drivers Are Not Recognizing my LiDE 100 Scanner in Photoshop CS5?

This is my first post, mainly becuase I'm stumped on every front to this problem, just bought myself a new 17" Macbook Pro the other day and immediately started to update all my drivers, through on Photoshop CS5 among a few other CS5 programs, but this is where things got hairy...
Since this is a 64 bit intel mac (Snow Leapord) , I went over and decided to download the TWAIN plugin, dropped it in the Import/Export plugins folder, went to the Adobe Photoshop app folder and happily clicked boot as 32 bit... aaaaand... NOTHING. It didn't see my scanner, and my scanner is a Canoscan LiDE 100, not that old. I've already had success doing this with Win 64 bit as long as I opened a 32 bit version of Photoshop, but no luck so far on the Mac. The scanner works fine with Image Capture so I know that he scanner is alive.
I've tried rebooting, finding other TWAIN plugins, even out of curiosity I've toggled between 32 and 64 bit Photoshop to see if the Scanner could be recognized. I know I could scan using Image capture, but I'd rather get this problem sorted out. I know that in some cases people boot using Rosetta, but this scanner isn't that old so I don't think that would be the problem.
If anyone has any advice, it would be greatly appreciated, and I realize that sometimes the most simple answer is the one that's the most easily overlooked, and I'm hoping that's the case.
Thanks everyone!

Scanning with TWAIN has become increasingly buggy.
Why not just use the Epson scanner software that came with the scanner?
That way you can continue to use Photoshop while using Epson to scan.
There are more features available from Epson than with Image Capture.
However, if you feel the need to use TWAIN, here is the link for Mac CS5 plugin.
Five seconds with Google would get you this:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4904

HT3669 Using/installing scanner Canoscan LIDE 50 with Mac OS 10.8.2

How can I use my canoscan lide 50 with my macbook pro retina (2012), which is running Mac OS 10.8.2?

It would appear that you cannot use this scanner on 10.8. Canon has not produced an ICA or TWAIN scanner driver. 10.8 does not list the LiDE 50 in its CanonIJScanner2 package. And VueScan states that to use it, you must first install the Canon TWAIN scanner driver. But the installer for this model was last written for 10.4 - meaning it requires support for PPC chipset which Apple ceased with 10.7.

How do I scan multiple pages into one document using the CanoScan LiDE 200?

How do I scan multiple pages into one document using the CanoScan LiDE 200?
I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do you get canoscan lide 110 scanner to display in "file import" menu?

I have several older versions of Photoshop Elements running on various computers. In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx". when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed. It only shows WIA under the import menu. The scanning software there is horrible. I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up. i then installed a older version of the elements software on the new computer. Again, the scanner showed up. Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it. it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need. without it, this version of elements is 100% useless to me. can someone please help me get my scanner to appear in the "file>import" menu? Yes, i do have the latest version of software downloaded from canon's website.

Hi,
I believe that this is where PC & MAC versions differ.
The PC version will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
If I find the link I'll post back.
Brian

I have a CanoScan Lide 700F scanner ,how do I scan Black and white neg.and turn them into positives?

I am scaning all old pictures, docts, slides ,but I have alot of b&w negs verious sizes, how can I turn them into b&w positives??

Hi Teddy.
The MP Navigator EX software that was bundled with your CanoScan LiDE 700F can be used to scan your black and white negatives. To use the MP Navigator, please follow these steps:
1. Start MP Navigator EX and open the Navigation Mode screen.
2. Point to Scan/Import and click Film.
3. Place the film on the Platen.
4. Click Specify... to set the document size and scanning resolution as required.
5. When setting is completed, click OK.
Important
Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again.
Note
To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box.
6. Click Scan. Preview scan starts. When preview scan of the film is completed, the preview image appears.
Important
If a message for calibration appears, remove the film, then place the Film Adapter Unit over the first frame of the Film Guide and click OK.
7. When the calibration is completed, follow the on-screen instructions to load the film into the Film Guide, then click OK.
Note
Preview image does not appear when the Preview before scanning checkbox is not selected in the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
8. Select the checkbox of the frame and click Scan. When scanning is completed, the Scan Complete dialog box opens.
9. Select Scan or Exit. To scan another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select Exit to end.
The scanned images appear in the Thumbnail window.
10. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc.
Note
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
11. Save the scanned images.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to get Mavericks Printer/Scanner to recognize Canoscan Lide 500F

I have a Canon Canoscan Lide 500 F scanner that worked perfectly with OSX 10.7.5 but Mavericks says it isn't connected? How do you get Mavericks to recognize USB devices that are connected? How do I get this scanner working again?

Hi ..
According to Canon there are no drivers for youur printer/scanner for v10.9 Mavericks compatibility here.
But there is an alternative. You can scan using the pre installed Image Capture app located in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Import To pop up menu on the right to save scanned files to.
If you need help with the Image Capture software, click Help from the Image Capture menu bar.
More help here > Mac Basics: Using a scanner

Canoscan LiDE 25 Only Scans at Low-Resolution

Since upgrading to Snow Leopard, I can't get a high-res scan out of Image Capture with my Canoscan LiDE 25. I've downloaded the 11.031 drivers from Canon's site but didn't improve anything.
I open image capture, choose the advanced options, let it run the overview scan, turn off the "Detect Separate Items" checkbox, resize the border to the part I want to scan, choose a scan location and filename, then turn up the resolution to 150 DPI. The scan runs really fast and then create a ~125 x 90 pixel image from the ~3" x 2" graphic I'm scanning. The same thing happens when I try to do a "Import from scanner" in Preview.
The Canon tools don't work with the latest driver version; anyone have an idea about how to get high-res scans again? (Besides buying VueScan…)

I know it's a great program — back when I worked in academic technology I convinced management to switch our computer labs to VueScan for both Mac and Windows.
However, considering I scan maybe 3 times a year, it seems there should be a solution for basic scanning that doesn't require a $40 license.

Is there a CanoScan LiDE 60 Driver for Lion?

Mac OS X Lion does not seem to have a driver pre-installed for the CanoScan LiDE 60 scanner. There also is no current option for a lion driver on the scanner's Manufacture support web site. Does anyone know a way to fix this?

Below is the FIX that I received from Canon - long but it works!!!
We are currently in the process of updating the listings on our website.
However, the 10.6 drivers are compatible with OS 10.7/Lion.
If you upgraded from 10.6 to 10.7, the drivers will have to be
reinstalled. The steps below will show you how to remove the drivers
from the system. If any items are not listed, move on to the next step.
Please perform the following:
1. From the Finder, hold the 'Control' key on your keyboard and click
the 'Go' menu at the top of the screen.
2. Open the 'Library' folder.
3. Open the 'Image Capture' folder, then open 'Twain Data Sources'.
4. Trash the CanoScan CanoScan XXXX.ds file.
4-1. Make note of any other files that may be in this folder. If
other files are present, move them to the desktop for now. Then place
them back after successfully using the scanner.
5. Return to the 'Library' folder.
6. Open the 'Preferences'
7. Locate and trash the 'CanoScan XXXX' folder.
8. Close the window and double-click on the Macintosh HD icon.
9. Double-click on the folder named Users.
10. Double-click on the folder named Shared.
11. Trash the folders named CanoScan, or starting with CNQL.
12. Return to the applications folder and Trash the CanoScan Toolbox
folder.
13. Open the Macintosh HD.
14. Open the 'Home' icon on the left (has a picture of a house).
15. Open the Library folder.
16. Open the Preferences Folder.
17. Locate any items named "CanoScan Toolbox", send it to the trash.
18. Restart your computer, then empty the trash.
Once this has been done, we will reinstall. To get your CanoScan LiDE
60 operating on your Mac, please follow these steps:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support
2. Just below 'Please choose your product from the menus below:',
select your model in the following manner:
2-1. Under Product Type, choose Consumer & Home Office.
2-2. Under Product Family, choose Scanners.
2-3. Under Product Series, choose CanoScan Series.
2-4. Under Models, choose the CanoScan LiDE 60 and click 'GO'.
3. On the Support page for the your unit, click the 'Drivers &
Downloads' tab.
4. Choose [MAC OSX] from the Operating System drop down box.
5. Expand the Driver listing, then click on the LiDE 60 Scanner
Driver, [lide60osx11131en.dmg].
6. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
7. A File Download box should appear. When it does, select Save.
8. When the Save As box comes up, click Save.
10. Once the download is complete, close all windows.
11. Once the download is complete, go back to the top and click on the
'Support & Service' tab and then click on the 'Drivers & Downloads' tab.
12. Choose [MAC OSX v10.6] from the Operating System drop down box.
13. Click on the CanoScan Toolbox, [cstbosx5014ej4.dmg].
14. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
15. A File Download box should appear. When it does, select Save.
16. Double click [lide60osx11131en.dmg] to install the scanner driver.
17. Double click [cstbosx4934ej4.dmg] to open the CanoScan Toolbox,
follow the steps to complete the installation.
Once this process is complete, open the CanoScan Toolbox and use the
Save function to test the scanner.

Canoscan Lide 200 will not start

After upgrading to Yosemite, when I plug in my USB-driven Canon scanner (into my Macbook Air from 2010) I get an error message advising that "a problem" occurred. Anyone else finding that a Canoscan Lide scanner will not start in Yosemite? Any suggestions as how to fix this situation? Thanks in advance.

Many thanks as well from me.
I was having a similar problem after upgrading to Yosemite with a USB CanoScan LiDE 700F. Don't think I had to install any drivers under Mavericks. Under Yosemite it just appears dead. Nothing ever happens. But, did see this error in Console whenever I plugged in the scanner. Then via a search found the above post.
For the LiDE 700F files are at:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide_700f#DriversAndSoftware
Console details for Canon IJscanner2 crashes :
Process:               Canon IJScanner2 [15959]
Path:                  /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2
Identifier:            jp.co.canon.ijscanner2.scanner.ica
Build Info:            ScanningCanon-1~1
Responsible:           Canon IJScanner2 [15959]
Library not loaded: /Library/Printers/Canon/IJScanner/Frameworks/CIJSDA.framework/Versions/A/CIJSDA
Referenced from: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2

Upgrade from Mac OSX 10.4 to 10.5 + Canoscan Lide 30 Scanner + X11

I have just changed from PC to Mac (iBook G4). The iBook is already set up and workiing properly. Some questions for an inexperienced Mac user:
1. Is it worthwhile changing to OSX 10.5? Will the personal setting be automatically updated or will it led to the inevitable Microsoft crashes?
2. have downloaded drivers (*.dmg) for canoscan lide 30 and tried to install it. The scanner does not work. Which programmes do I need?
3. How/where do I get the latest version of the X11 software for OpenOffice? The downloads from the internet cannot be installed because of the new versions of OSX 10.4.
Thanks in advance for the help.
Kindest reagrds

1. Which iBook model do you have? You need a minimum of 867 mhz, 512MB of memory,
DVD drive for installation and 9GB of available disk space. Doing an upgrade should preserve your user settings. Is it worthwhile? Only you can answer that. Frankly I would stay with Tiger 10.4.11 with your machine.
2. You may need to take that up with Canon.
3.Note 10.4 customers can install X11 by using the Tiger DVD installer disk. See here:
http://overstimulate.com/articles/installing-x11-on-os-x-10-4-tiger

How to descreen on a canoscan lide 100?

Similar Messages

Maybe you are looking for