How to Deselect Tool after use ?

Newbie Question - Adobe Acrobat 8.1
How do I "deselect" or turn off a tool after I have finished using it, and get the document back to original state as when first opened.
Example
When I select :
Tools-> Advanced Editing-> Link Tool
a checkmark appears next to the link tool, and I can review and edit, or create links.
Once done, How do I turn this off,?? to then see how the newly created or edited link works....without having to close the entire pdf document and then reopen it.
Thanks for any advice...I have done much searching looking for an answer to this with no success..

Click the hand tool.
Aandi Inston

Similar Messages

A question about using the history tool after using the extraction tool in photoshop cs3..

For example:
http://www.layersmagazine.com/photoshop-...
When I use the history tool, it erases the image instead. Whats up with that?

G'day Chris
I can't tell from the link exactly which tutorial you mean!
If the original layer is a white background and the snapshot is set to this then the history tool will paint back white even if you then paste or drag an image onto the layer above this.
You would have to take a seperate snapshot of your image layer and set this layer as the snapshot you want the history tool to use before you start working on it.
One neat thing you can do is if you paint back some detail with the history brush you can immediately go to Edit > Fade and fine tune how much of the effect you want to apply.
Hope this helps.
regards
John

HT3231 how to find file after using migration

how to find files after migration has finished

If you don't have any file you need in your old account, open System Preferences > Users and Groups and delete the old user. If not, I recommend you to migrate your files of your old account to the new one using Shared folder or an USB drive

How to stop Microphone after use ?

Hello,
I'm using the flash.Microphone class and when I call Microphone.get(), the microphone starts working.
But I would like to disable it after use. As on some computers, you hear yourself.
How to do something like Microphone.release() ?
Any idea ?!
Thanks.
Thomas Bullier
Le Hub Agence

SoundTransform
Volume
And it's fixed !

How to read data after using the PRINT function in visual basic

I know the benchlink can capture the spectrum analyzer screen for me, but I want to integrate it into my application. I use NI spy to detect the communications from the benchlink and put it into my application. After sending the "PRINT 0" command, my "ilrd SpectrumAnalyzer, temp, 500" command doesn't work, giving me EARG error. Does anyone knows if it is because I can not define the temp to be string or some other problem?
b.t.w, the communications I get from NI Spy actually read some unknown characters from the instrument, what kind of data it is? Any idea how to use it?
thanks.

Hello elm,
This is completely dependent on your instrument; if you are getting the data then you are halfway there. Look in your instrument's programmer's reference manual to see if they mention how the picture is encoded in bytes. There are so many different ways to encode a picture in binary that speculating and guessing would probably never yield the true result. If there is no mention in the manual, contact the instrument manufacturer.
Sorry I could not be of more help.
Scott B.
Applications Engineer
National Instruments

How to destroy object after use.

Hello friends,
i have used one class which is making telnet connection to some remote system and running commands over remote system.
after finishing everything successful, that telnet connection is not closed.
how can i close the telnet connection explicitly. i think if we forcefully destroy the class object, then the telnet connection will be closed automatically.
Is there any method to destroy the object explicitly with out using finalize() method.
rgds
tskarthikeyan

masijade. wrote:
kajbj wrote:
masijade. wrote:
TSKarthikeyan wrote:
Is there any method to destroy the object explicitly with out using finalize() method.Stand in front of your computer and watch the program execute. As soon as you get to the point where you want to destroy an object ... pull out your sledgehammer and swing away.Will that work if it's executing on a remote server?I don't know, but I'd like to give it a try. ;-)Stop stop stop stop it please
LMAO... Yep, there it goes... Don't look at me like that ya' smelly hairy little... Now i've compeltey lost it.

How can simple tools be used in 32-bit-per-channel images?

I have just begin working with HDR imaging. I am using it for what it was designed for. The subject of the photograph is a creek, looking straight across the creek to the far bank. The creek and the far bank are in bright sunlight. I was in woods, and deep shadow, when I took the photograph, and so the foreground is very dark. I converted the image to 32 bits/channel when merging it into HDR Pro, and used ACR to tone the final image. All of that worked very well.
But when I wanted to make some final little adjustments to the image, I found that I coulnd't! I wanted to select a color range, but the Color Range option was grayed out. I tried to use the magnetic lasso, but a message box popped up saying that I couldn't use that tool in 32-bit images.
I don't understand this limitation. 32 bits are supposed to be best for HDR images, but I can't use simple tools to edit the result?
And then when I switched to 16 bits, it seems I have to merge the channels first, but that loses all of the smart filters and other history that I had when working in 32 bits!
What is the best workflow for doing this? Is there something I am missing that would help?
Thanks very much!
RobR

Thanks again for helping me understand.
But I'm afraid I'm still a fair bit mystified. I'm trying to move away from why 32-bit is different from 16-bit and into what is the typical workflow for an HDR image where the goal is a realistic scene.
Are all edits typically done in ACR? Or do people accept the loss of the ability to use ACR when they switch to 16-bit mode to get the simple tools like selection, dodge/burn, and so on? It seems to me that the best of both worlds is to save the ACR-only version of the image and then convert to 16 bits and, once final editing is complete, to save that version separately? That way, should the ACR need to be adjusted, it could be done starting from the original settings, and only the 16-bit changes would need to be redone manually.
Thanks again.
RobR

Acrobat X automatically deselects Quick Tools after each use

After selecting & using a Quick Tool like line/arrow/etc, the selection is automatically dropped. It must then be clicked on again to re-use the same tool. Any ideas what might cause this. Granted, it's an annoyance, but having to click the same tool over and over again after use gets old fast.
Thanks!

I don't know if Acrobat is the same way or not. but most programs that deal with Graphics when you single-click on a Tool it selects for the duration of that particular use. And if you want it to be remain selected you double-click in fast succession. click on it again just once, deselects it.

Adobe Reader deselects the pen tool after making a single mark. How do I fix this?

I have a Surface Pro 2 tablet that deselects the pen tool after I make any kind of mark with it. It works occasionally with the mouse but not the stylus. For example, if I were to write a "41", I'd have to make one stroke, then select the pen tool, and then make the other stroke to complete the "4", select the pen tool again, and then write the "1".
The Adobe Reader is updated to the latest firmware (11.0.10).

Wow lol I think that might have been the issue I pressed it a few times and it stopped, thank you!

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps.

After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly. How do I fix it?

I use logic 9
After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro. (Obviously, I know it wouldn’t be the same quality. I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
After opening up a project I was unable to record audio. I noticed the track headers had changed. Sometimes the “record ready” button was missing. But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!” I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.” To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
Do I need to reset something?
If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future? How do I keep it permanently from this malfunction? It seems like this is something simple that would be addressed.
Also, as I was trying to think of anything it could possibly be. I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue. After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.) I used the m-box on my previous computer and it worked well. Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet. I don’t know if that could possibly be messing anything up. If so, should I uninstall it somehow?
Thanks

Ok, think this through... you've changed from a stereo source to a mono source.
The message reads: “No input source selected!”
On the track you're trying to record there is an Input section directly underneath the I/O label. Click and hold to select the correct Input for that track.
Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

Urgent - How to Run a FM using CATT script tool,

Hi All,
How to Run a FM using CATT script tool,
Thanks in advance,
KSR

choose type as "Function module test" (if you are in release less than 6.4 abap) after entering into t.code SCAT.
Pl. refer to this documentation for creating function module test cases
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf</a>
reward if it helps
Krishna

Text box tool remains "on" after use

Adobe Reader 11.0.09 on Mac OSX 10.6.8 (antique)
QUESTION: How to resolve failure of text-box tool to inactivate after use. Instead, creates numerous undesired text boxes.
I am using Adobe Reader 11.0.09 on a Mac with OS 10.6.8 (ancient). Under the Comment tab, the second set of tools has eleven "Drawing Markups." Typically, when a user has completed the use of one of the markup tools, the tool is no longer highlighted. In the recent past, the "Text Box" tool remains highlighted after creating a text box with keyed in text. The next click anywhere on the document creates ANOTHER undesired text box. Sometimes, when clicking within an existing text box to supplement/edit the text, two or more NEW text boxes are created within the original (i.e., because of a click at the location of desired text editing). Simply as a test, I examined the behavior of each of the eleven markup tools, and found that all but the pencil tool "inactivate" (un-highlight) after the drawing (e.g. a circle/oval or square/rectangle or arrow) is complete. QUESTION: Has anyone else observed that one or more "Drawing Markup" icons remain in the "active" status AFTER the mark-up drawing has been completed? If YES, did you find a fix for the annoying problem?

https://discussions.apple.com/message/25495158#25495158

AE crashes after using camera tool

Hi!
I currently have a major problem with my Adobe After Effects, my problem is that I seem to get a very annoying error when I use the Camera Tool after applying a CC Particle World (I have no idea if it's just the Camera Tool that isn't working or if it's the combination!)
The error is pretty much the same as the one in the thread I linked below, I read it but I do not get my answer, so maybe anyone could help me out? The rest of the package works fine!
http://forums.adobe.com/thread/660078?tstart=60
A picture of my actual error:
http://i42.tinypic.com/28u5zxd.jpg
Also, a picture from my dxdiag, if that helps
http://i39.tinypic.com/2vx4l1h.jpg
Videocard is an Nvidia GeForce GT 540M
Thanks in advance,
Casper

As for TimeRemapper's solution, this is how my screen looks like;
http://tinypic.com/r/sopguw/5
As for Rick Gerard's solution, this is how my screen looks like.
http://tinypic.com/r/2z3uo20/5
To me it looks like it's both disabled :/
Note: I did not roll-back my drivers yet!

"Damaged" fonts in pdf file after using TouchUp Text Tool

Hello,
I have a question regarding an issue with lost fonts in a pdf file.
The document was created in Adobe InDesign and printed to pdf.
However, after using the "TouchUp Text Tool" in order to check the font for a certain text, several attributes of the font have been damaged in the entire pdf: all characters in "small caps" have been transformed to regular.
We've had 3 cases so far.
Does anyone know how we can prevent this from happening again?
When exporting the document to pdf, all fonts were embedded, I am not sure if this can be the cause.
Thank you in advance for any suggestions!
Paula

We are using Adobe 8 Professional.
Bill@VT, I am not sure what you are asking me
I have checked the Preferences for the pdf file and the "Use system fonts" case is checked.
When opening the pdf file, the fonts were ok, but somewhere along the process, the small caps were lost.
Maybe a print screen will be of use: the presentation above is the correct presentation (the one immediately after exporting to pdf); the presentation below is the one after all fonts were damaged.

How to Deselect Tool after use ?

Similar Messages

Maybe you are looking for