How to design a mesh with 1552 AP and remote antenna ?

Hello,
I must design an architecture for a mesh deployment with 1552 access points. Quote has been done with 1522, but it seems that these access points are in end of life.
On previous deployment I've made with 1522, it was possible to have a remote 5Ghz antenna for the mesh and 2.4 Ghz antenna directly connected to the access point for coverage.
It seems that is not possible for 1552 because there is only 3 antenna dual band and no difference between them. It's a big issue for me, because in my project I must cover an industrial indoor area but i have a mesh between building. How can i do that with 1552 ? is is possible to have a remote antenna on this access point ?
Please let me know if there is something you don't understand.
Thanks in advance for your answers.
Benoit

Most of the MESH AP use a single 5GHz radio for both the uplink and the downlink, which halves your connection speed at each hop as you are repeating the signal.
The 1524SB has two 5GHz radio one for uplink and one for downlink. It was designed for when you need to go long distances. With two Blackhawks you can keep the 54 MBPS link T each hop, or whichever speed your SNR allows. It will also work for a direct shot between two buildings for bridging.
Sent from Cisco Technical Support iPad App

Similar Messages

How to design a smartform with below tables and table-fields??

How to design a smartform and driver program using this tables and table fields
FIELD DESCRIPTION     TABLE-FIELD
Tax Invoice No:     vbrk-vbeln
Code     vbpa-kunnr where parvw = RG
Ship To     vbpa-kunnr where parvw = WE
PAN No     J_1IMOCUST-J_1IPANNO for WE
ECC     ,,
Range     ,,
Div     ,,
Excise Reg No     ,,
LST No     ,,
CST No     ,,
Invoice No:      vbrk-vbeln
Do No:     vbfa-vbelv where vbeln = inv no and vbtyp_v = C get the vbeln where vbak-auart = 'ZDO'
Sales Doc Num:     vbfa-vbelv where vbeln = inv no and vbtyp_v = C get the vbeln where vbak-auart = 'ZSO'
PO:     vbkd-bstkd where vbeln = sales doc no
Delivery No:     select vbelv from vbfa where vbeln = inv no and vbtyp_v = J
Goods Removal Dt&Time:     select vbeln from vbfa where vbelv = dlv no and vbtyp_v = R Put this vbeln in mkpf and get BUDAT and CPUTM
Selection screen parameter should be : vbrk-vbeln.

Hi,
First design your form interface, this is the set of fields that you need to display in your form and create this as a structure in SE11. In your print program code the logic to extract the data into this structure, this is just regular ABAP, nothing special here.
When you have your data call function module SSF_FUNCTION_MODULE_NAME to determine the name of the generated smartform function module. Then call this function module, passing the data collected into your structure. If necessary you will need to find the print parameters required and pass these too.
In your smartform you will need to use the data structure you created in SE11 as the smartform interface and design the layout required to display these fields.
Regards,
Nick

How to design a form with multiple lang(Arabic and Eng) in a page

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

How to design a form with multiple lang(Arabic and Eng) in a pge

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to create 2D array with 3 rows and unlimit column?

how to create 2D array with 3 rows and unlimit column?

Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG ‏7 KB
2D-array_values.PNG ‏13 KB

Motion how to create 3d effect with a background and one primary object

motion how to create 3d effect with a background and one primary object

… like that?
http://youtu.be/yOht1GJpEm4

How to display polygons both with line contour and filled interior?

How to display polygons both with line contour and filled interior?
Java3D 1.3, Java 1.4.1-rc

Hi,
I just started with Java3D last week.
I assume you mean drawing polygons with outlines (wireframe) in one color and polygon face filling with another color. If so, I've got the same question! (I usually think of "contour" to refers to plotting surface intensity of independent data like temperature or elevation, but I don't think you mean this.)
The only solution I've found so far is to make two shapes with the same geometry.
Here's an example - an outlined and filled cube. I made it using a generalize class DualShape which is two shapes with the same geometry, but one filled and one as a line.
It works, although I can't say I understand the setPolygonOffset(), knowing what value to set. Without the command, the depthbuffer can't consistently decide which should be in front between the fills and lines so it looks bad.
I certainly think it would be nicer to do both internally, like:
pa.setPolygonMode(pa.POLYGON_LINE || pa.POLYGON_FILL);
And then have setFillColor and setLineColor for each.
I don't know why they don't allow this - maybe OpenGL can't do it like this so Java3D follows.
If anyone has any better ideas I'd like to hear about it.
Tom Ruen
class DualCube extends DualShape // cube with outline and fill colors
public DualCube(float ax, float ay, float az, //cube lower corner
float bx, float by, float bz, //cube upper corner
float br, float bg, float bb, //border color
float fr, float fg, float fb) //fill color
setGeometry(new CubeGeometry(ax,ay,az,bx,by,bz),br,bg,bb,fr,fg,fb);
class DualShape extends BranchGroup //general shape with outline and fill colors
Appearance ap1,ap2;
PolygonAttributes pa1,pa2;
ColoringAttributes ca1,ca2;
Shape3D s1,s2;
public void setGeometry(Geometry geo, float br, float bg, float bb, float fr, float fg, float fb)
//filled shape:
addChild(s1=new Shape3D(geo, ap1=new Appearance()));
ap1.setPolygonAttributes(pa1=new PolygonAttributes()); pa1.setPolygonMode(pa1.POLYGON_FILL);
ap1.setColoringAttributes(ca1=new ColoringAttributes()); ca1.setColor(fr,fg,fb);
//lined (wire) shape:
addChild(s2=new Shape3D(geo, ap2=new Appearance()));
ap2.setPolygonAttributes(pa2=new PolygonAttributes()); pa2.setPolygonMode(pa2.POLYGON_LINE);
ap2.setColoringAttributes(ca2=new ColoringAttributes()); ca2.setColor(br,bg,bb);
pa2.setPolygonOffset(-1000); //Uncertain what "float" value to use!
class CubeGeometry extends IndexedQuadArray //cube geometry data
private static final int[] faces =
0,3,2,1,
0,1,5,4,
1,2,6,5,
2,3,7,6,
3,0,4,7,
4,5,6,7
private static float[] verts = new float[24];
public CubeGeometry(float ax, float ay, float az, //lower limit
float bx, float by, float bz) //upper limit
super(8, IndexedQuadArray.COORDINATES , 24);
int n;
n=0; verts[n]=ax; verts[n+1]=ay; verts[n+2]=az;
n=3; verts[n]=bx; verts[n+1]=ay; verts[n+2]=az;
n=6; verts[n]=bx; verts[n+1]=by; verts[n+2]=az;
n=9; verts[n]=ax; verts[n+1]=by; verts[n+2]=az;
n=12; verts[n]=ax; verts[n+1]=ay; verts[n+2]=bz;
n=15; verts[n]=bx; verts[n+1]=ay; verts[n+2]=bz;
n=18; verts[n]=bx; verts[n+1]=by; verts[n+2]=bz;
n=21; verts[n]=ax; verts[n+1]=by; verts[n+2]=bz;
setCoordinates(0, verts);
setCoordinateIndices(0, faces);

How can I take photos with my iPhone and edit them on my iPad?

how can I take photos with my iPhone and edit them on my iPad?

Copy Photos Between iOS Devices
http://tinyurl.com/cnz95bc
 Cheers, Tom

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

How to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

how to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

Hi,
There is no way to delete those records selectively from front end.
The best possible way is to delete the records from MRP_FORECAST_DATES tables from backend.
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

How to design a mapping with a pre-mapping operator

Hi,
I want to design a mapping with only one operator: a pre-mapping operator that uses a procedure with no parameters (so there are no input/output groups). When I validate this mapping I get error VLD-1009: Mapping lines have not been created.
Question 1: how do I design a mapping if all I want to do is to execute a procedure and there are no target operators involved?
Question 2: how are pre-mapping process operators intended to be used? (apparently not the way I use one here)
Jaap.

One way of doing this is to jus add a constant and a target table to insert a value into a dummy target. (i.e sysdate into dummy_table) This way you can execute the procedure using a pre mapping operator.

How to design a mesh with 1552 AP and remote antenna ?

Similar Messages

Maybe you are looking for