How to design simple person like this image(attached) using illustrator ??

hi ,
i want any one help me and tell me steps to design simple person like this using illustrator :

hello,
thanks ,

Similar Messages

How to make an avatar like this,

Hello Adobe Community, i'm new here, i have a big question. I want to know HOW to make an avatar like this:
I want to know how to do that effect that who zoom in and zoom out etc. WITHOUT SNOWING, only that effect, if you can help me please!
That zoom effect is AWESOME... send me a tutorial please!

I thought you said you knew how to make animated gif. A frame is the composite of the layers that have their visibility on for the frame a frame may be made using many layers. You use tools and filters on layers.You make frame using layers.
Photoshop also supports any size layer. Layers can be larger the canvas size can have image data out side the canvas. Layer image data position above can be move relative to the canvas. The Cloud logo animation has two layer one is masked is masked the mask is not linked to the layers image data it stationary over the canvas and is more on less a masks more foe the background canvas then the layer its on. The layer it is on image data is more off canvas then over canvas. Photoshop also notes layer position in a frame information, A layer potion can be change from frame to frame. I only create two frame for that animation. The first and last frame, The first frame I had the top late image JJMACK high and off canvas to the left. The last frame had it low and off canvas to the right. I then had Photoshop generate 138 frames between the two frames I created. So Photoshop moved the top layer position across the canvas left to right and high to low direction and the stationary layer mask masked it as if it were going through the background layers clouds. The two layers are visible in all frames.

How Could I Make Something Like This.

http://www.youtube.com/watch?v=vlRdjAwEzbU
I Am Wondering How I could make something like this in AfterEffects CS4.
Any Help Would Be Appreciated.

dx394 wrote:
Is There A Tutorial Anywhere About It?
You could contact the animator or whoever posted the clip.
Deconstruct the sequence. observe the moves and decide, with your present level of familiarity, how you would approach it. Scaling of the ten or so different layers is simple enough but acquiring the contents of the layers is not something you will do in AE.
As Todd says, start small, figure it out one step at a time, move on to more advanced functions. Animting 3D layers is 9 times more difficult than 2D. when you add lighting and camera moves you raise the complexity level and rendering time to another power making your project about 27 times more difficult.
bogiesan

How can i generate xml like this?

Hi all,
How can i generate xml like this & i need to send it to via HTTP :
<mms>
             <subject>message subject</subject>
             <url_image>http://image_url</url_image>
             <url_sound>http://sound_url</url_sound>
             <url_video>http://video_url</url_video>
             <text>message text</text>
             <msisdn_sender>6281XYYYYYY</msisdn_sender>
             <msisdn_receipient>6281XYYYYYY</msisdn_receipient>
             <sid>to be define later</sid>
             <trx_id>Unique number</trx_id>
             <trx_date>yyyyMMddHHmmss</trx_date>
             <contentid>see note</contentid>
</mms>& how can i get the value of the sid (for example)?
I hav tried to generate that xml by using StringBuffer & append, but it's not what i mean...
Anyone can help me?

Ok...i got it. But i still hav some problems.
This is the sample code that i used :
public class XMLCreator {
     //No generics
     List myData;
     Document dom;
        Element rootEle, mmsEle, mmsE;
        StringWriter stringOut;
        mms mms;
     public XMLCreator(String subject, String image, String sound,
                String video, String text, String sender, String recipient,
                int id, String date, String contentid) {
          mms = new mms(subject, image, sound, video, text, sender,
                        recipient, id, contentid, date);
                createDocument();
     public void run(){
          createDOMTree();
          print();
     private void createDocument() {
          //get an instance of factory
          DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
          try {
          //get an instance of builder
          DocumentBuilder db = dbf.newDocumentBuilder();
          //create an instance of DOM
          dom = db.newDocument();
          }catch(ParserConfigurationException pce) {
               //dump it
               System.out.println("Error while trying to instantiate DocumentBuilder " + pce);
     private void createDOMTree(){
          //create the root element <Mms>
          rootEle = dom.createElement("mms");
          dom.appendChild(rootEle);
          createMmsElement(mms);
     private Element createMmsElement(mms b){
          Element subjectEle = dom.createElement("subject");
          Text subjectText = dom.createTextNode(b.getSubject());
          subjectEle.appendChild(subjectText);
          rootEle.appendChild(subjectEle);
          //create url_image element and author text node and attach it to mmsElement
          Element imageEle = dom.createElement("url_image");
          Text imageText = dom.createTextNode(b.getUrl_image());
          imageEle.appendChild(imageText);
          rootEle.appendChild(imageEle);
          // & etc....
          return rootEle;
      * This method uses Xerces specific classes
      * prints the XML document to file.
     private void print(){
          try
               //print
               OutputFormat format = new OutputFormat(dom);
               format.setIndenting(true);
                        stringOut = new StringWriter();
               //to generate output to console use this serializer
               XMLSerializer serializer = new XMLSerializer(stringOut, format);
               //to generate a file output use fileoutputstream instead of system.out
               //XMLSerializer serializer = new XMLSerializer(
               //new FileOutputStream(new File("mms.xml")), format);
               serializer.serialize(dom);
          } catch(IOException ie) {
              ie.printStackTrace();
        public String getStringOut() {
            return stringOut.toString();
}when i tried to show the stringOut.toString() in my jsp, it's only showed string like this :
The Lords Of The Ring http://localhost:8084/movie/lotr.3gp 6281321488448 6281321488448 123 0 20070220114851 LOTR.
1. Why this is happen?i want to generate xml which its format is like above.
2. How can i send this xml (put in msg parameter) using jsp (via web) without creating the mms.xml?
3. if i want to set the msg parameter equal to mms.xml - means that msg = mms.xml, what is the data type for msg? is it an object or anything else?
Thx b4 in advance...

I was wondering how you would do something like this?

Hi i was wondering how you would do something like this?
i recently got photshop CS5 and wanted to do something like this!

Not sure exactly what the effect you are looking at, but my first glance is just an overly of 3 or more pictures. The portrait in the back is just like 50% transparency.

HT201441 I found a phone that had been stolen, so I asked apple id to its original owner she said that she had forgotten and replace the apple id, how to solve a problem like this?

II found a phone that had been stolen, so I asked apple id to its original owner she said that she had forgotten and replace the apple id, how to solve a problem like this?

Send the original owner this link.
(120249)

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

I need to send a large amount of photos. How do I share them like I did previously using Mobile Me?

I need to send a large amount of photos. How do I share them like I did previously using Mobile Me?

Directly from iPhoto use Facebook and/or Flickr. SmugMug is another one some people like. Google will show many more.
LN

How can I design hand logo like this?

I want to explain how to design a hand logo like this, thank you very much.

Have a look at this http://www.youtube.com/watch?v=-Uxl9-ktPN8 to get you started.
For this kind of design (which CAN be designed in Photoshop) you might be better exploring Illustrator.
Good Luck
Cheers
John

How do you get something like this? I think it some kind of roll over effect

Hello, I was wondering if it is pretty simple to set something up like this? and how it was done
http://www.professional-organizer.com/photos.html#
I am talking about the pictures, where you roll over the bottom number and they change
thanks

CSS Disjointed Rollovers.
http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
CSS Disjointed Image Viewer
http://alt-web.com/DEMOS/CSS-Image-Viewer.shtml
(='.'=)
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

How to make a website like this

Does anyone know a good publication or training DVD that will
quickly teach me how to make websites like this:
http://blusites.com/adam/
I've been taking a flash course through a local college and
all they teach me is how to do stupid animal animations, animated
gifs etc... I'm dropping the class hoping that I can teach myself
and not waste anymore time
Thanks!

Personally, why pay to view linda.com videos when you can
access all the videos you could want for free at
http://www.adobe.com/designcenter/video_workshop/
I'm not crazy about the videos anywhere because I might have
to watch them again and again, but some of the videos have a
tutorial and a file to download.
If you're the type that you like to do all you can before
going to a forum, then you can do these things:
1. I don't know if you have Adobe Creative Suite 3, but if
you want to make websites with flash, you will need the program.
2. I like the flash movie at
http://blusites.com/adam/blu1.swf,
but believe it or not, it's a very simple movie. The photographs
are supplied by a professional photographer, and the flash movie is
simple.
3. If you already know how to make movies using Flash, then
get yourself an Advanced Flash book to to learn faster and become a
better flash creator. Flash CS3 uses ActionScript 2.0 and 3.0. You
might like to get a book on ActionScript 3.0 to learn faster.
You can and will learn faster and better if you take the time
to do 2. and 3.
There is a ton of Flash Tutorials at Adobe and other
websites, do a search and you'll get so many sites it could take
years to visit them all.
good luck, hope this helps
jan

How are PHP pages created like this ...

http://www.foo.com/fooing.php?id=10
OR
http://www.foo.com/fooing.php?id=20
etc.
Shane H
[email protected]
http://www.avenuedesigners.com

<a href="detailpage.php?id="10">Article 10</a>
<a href="detailpage.php?id="20">Article 20</a>
<a href="detailpage.php?id="30">Article 30</a>
In DW server behavior parlance, it's a master/detail page
arrangement.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Shane H" <[email protected]> wrote in
message
news:[email protected]...
> Okay - say I have something like this on a page called
list.php :
>
> Article 10 (link)
>
> Article 20 (link)
>
> Article 30 (link)
>
> Article 40 (link)
>
> I want those to open with the .php page say
"articles.php" but have
> ?id=20, 30, etc.
>
> Do those need seperate .php pages created for them, or
how exactly would I
> do that?
>
> Thanks for sticking with me here, guys.
>
> --
> Shane H
> [email protected]
>
http://www.avenuedesigners.com
>
>
> "(_seb_)" <[email protected]> wrote in message
> news:[email protected]...
>> Shane H wrote:
>>>
http://www.foo.com/fooing.php?id=10
>>>
>>> OR
>>>
>>>
http://www.foo.com/fooing.php?id=20
>>>
>>> etc.
>>>
>>> --
>>> Shane H
>>> [email protected]
>>>
http://www.avenuedesigners.com
>>
>> whatever is after the "?" is a variable ("id") and
its value ("20").
>> The variable value is retreived by PHP via the $_GET
array:
>>
>> <?php
>> $var = $_GET['id'];
>> echo $var;
>> ?>
>>
>> This will output the variable value (10 or 20).
>>
>> Then you can use these values to outup different
things:
>>
>> <?php
>> $var = $_GET['id'];
>> if ($var == 10){
>> do_something();
>> }
>> if ($var == 20){
>> do_someting_else();
>> }
>> ?>
>>
>> A typical example would be withy an image gallery,
each thumbnail would
>> have a link to the same page, but with a different
variable:
>> <a href="big_image.php?id=10"><img
src="thumb10.jpg"></a>
>>
>> so each thumbnail would open the same page, but in
this page, the
>> approperiate bigger image would be outputted buy PHP
according to the
>> variable:
>>
>> <?php
>> $big_image = $_GET['id'].'.jpg';
>> echo '<img src="'.$big_image.'">';
>> ?>
>>
>> this will output:
>>
>> <img src="10.jpg">
>>
>> --
>> seb ( [email protected])
>>
http://webtrans1.com | high-end web
design
>> Downloads: Slide Show, Directory Browser, Mailing
List
>
>

How to create a report like this.

Userid       logintime                                                    logouttime
367     2008-12-22 08:58:09.000          2008-12-22 10:18:02.000
369     2008-12-22 08:52:04.000          2008-12-22 10:18:13.000
371     2008-12-22 08:58:27.000          2008-12-22 10:36:24.000
374     2008-12-22 08:01:26.000          2008-12-22 10:17:54.000
375     2008-12-22 08:56:14.000          2008-12-22 10:18:16.000
376     2008-12-22 08:57:38.000          2008-12-22 10:17:57.000
463     2008-12-22 12:05:13.000          2008-12-22 13:01:39.000
450     2008-12-22 12:01:31.000          2008-12-22 12:14:42.000
from this data....i want to find how many people online each hour.
Time      Login
8AM         0
9AM     5
10AM     5
11AM     0
12PM     2
01PM     0
02PM     0
03PM     0
04PM     0
05PM     0

I don't think..both person's solution will work in this case.
My user table data is like this.
Userid          logintime                                  logouttime
367              2008-12-22 08:58:09.000           2008-12-22 10:18:02.000
369              2008-12-22 08:52:04.000           2008-12-22 10:18:13.000
371              2008-12-22 08:58:27.000           2008-12-22 10:36:24.000
374              2008-12-22 08:01:26.000           2008-12-22 10:17:54.000
375              2008-12-22 08:56:14.000           2008-12-22 10:18:16.000
376              2008-12-22 08:57:38.000           2008-12-22 10:17:57.000
463              2008-12-22 12:05:13.000           2008-12-22 13:01:39.000
450              2008-12-22 12:01:31.000           2008-12-22 12:14:42.000
from this data....i want to find how many people online each hour using a report.
Time              Login
8AM              0
9AM              5
10AM            5
11AM            0
12PM            2
01PM            0
02PM            0
03PM            0
04PM            0
05PM            0
i think this is not possible using report.
maybe i need to create a view in db from above table first and out of view should be report data...then just use report to display.
is there a better and easy solution than above?
nobody ever tried a report like this?.
we need group by time function in crstal...each hour, each 30 mins, each 15 mins etc...more time features..

How to make a photo like this? (footballer)

Dear All,
I am enclosing a photo that I found in the Internet. This is a footballer photo.
May I know how I can make a photo like this in terms of color and texture in Photoshop? Many thanks!
Best regards,
Keith

What you'll want to do is pick a photo with something like a person or an animal in the foreground. Then, use the Lasso tool to trace around the outside. Separate the person and the background into two or more layers, depending on how much you want to change. Up the saturation on the background, and apply a blur under the filter menu. It might just be the angle the photo was taken from, but they could have possibly added a light effect behind him as well. As for the guy, it looks like they upped the contrast and lowered brightness. Since i don't know from what angle the photo was taken, those are the only effects I can say were most likely used.
Hope this helps,
Cole

Bridge: How to make PDF looking like this:

I try to arrange my images in PDF document, which I'm making in Adobe Bridge CS5.
I want to make this looking something like this:
How to make it?

Or get a decent program like Contact Sheet X.
http://csx.riaforge.org/

How to design simple person like this image(attached) using illustrator ??

Similar Messages

Maybe you are looking for