How to design these containers for info and graphics?

I am not even sure what this is called, it is a combination of CSS and html, a simple container for information and graphics like seen on this page:
http://www.adobe.com/cfusion/labs/search.cfm?loc=en_us&term=spry&search=
with the header "Search Adobe.com"
1. Is there a way to easily design one of these in DW without knowing code?
2. Is there an extension to do this?
Thanks!!!

See here http://www.extendstudio.com/product/flexipanels_css.html

Similar Messages

  • I got a new iphone 5c for Xmas and my laptop is registered with my iphone 4, which I no longer use or have hence the new phone lol. How do I remove the old info and register my new phone? Will it let me?

    I got a new iphone 5c for Xmas and my laptop is registered with my iphone 4, which I no longer use or have hence the new phone lol. How do I remove the old info and register my new phone? Will it let me?

    You do not register the phone with the laptop. If you are using the same Apple ID on the new phone as the old, you will have no trouble. Connect the phone and you can restore from a backup of the old phone, or just sync your new phone if it is already set up, with the laptop, managing your content in iTunes.

  • How do I change the copyright info and links in collection pages?

    Can anyone tell me how I can change the copyright info and links on a collection page using the new updated Public Site Manager?
    1. When I click on 'Configure selected collection' there doesn't seem to be an option to edit copyright information and I've tried editing the info in Settings > Copyright Notice but it doesn't filter through to the collection pages.
    2. When I click on 'Configure selected collection' the links tab is empty but on my collection page there is a link called 'website' which links to our University website but the url is incorrect so I need to change it.
    Example screenshot -
    Thanks

    Also when I add a url list to a collection page and then delete all the links I'm left with a blank url list showing in preview page in iTunes. This should not happen, the admin guide says -
    "To delete a collection page URL list, delete all the links in the list. When you publish, if you have a URL list with no links, iTunes U Public Site Manager hides the empty URL list."
    It doesn't. At least it doesn't for me when I preview the collection in iTunes.
    Example screenshot

  • HT1918 how do i verify my billin info and address?

    how do i verify my billin info and address

    Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID?  --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
    Forgotten security questions - https://discussions.apple.com/message/18402551  and https://discussions.apple.com/message/18625296
    More involved forgotten question issues - https://discussions.apple.com/thread/3961813
    Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
    John Galt's tips (09/2012) - https://discussions.apple.com/message/19809294
    If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store.

  • How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

    Hi,
    How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
    I tried with acual method as below from client '000':
    DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
    After this when I tried to logon '001' using SAP* with password PASS it is giving  the message that Incorrect logon and password.
    (Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
    SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
    Can anybody throw some light on this? RewardS is guranteed for solutions!
    -B S B

    Hi again:
    I forget to tell.
    You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
    Hope this wil help,
    Eric

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

    How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

    As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number.  If you need help finding a link to download the file, please indicate the PSE version you need.

  • How to create a Templates for Categories and Products In BCC

    Hi All,
    Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
    If possible can any one send the document or where we find in atg docs
    Regards,

    At product/category/sku level there is a property called template.
    Find the property in ACC/BCC and provide all the values including the URL property.
    In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
    <dsp:valueof param="product.template.URL" />
    Using that property with <dsp:include> includes that page.
    Peace
    Shaik

  • How to set userlevel permission for GFS and NFS

    hi
    how to set userlevel permission for GFS and NFS?
    regards

    hi
    http://www.redhat.com/docs/manuals/enterprise/
    AND
    http://en.tldp.org/
    probably your best bet.
    regards

  • I want to design some products for resale and I want to know if I can use the included Fonts

    I want to design some products for resale and I want to know if I can use the included Photoshop Fonts and Images or do I have to pay additional licensing fees?  Very new to this and just looking for some basic information or a link to specifics.  Most of what I'm searching for brings up content for publishing and I'm really looking for information about reselling items in a product line.  For example Greeting Cards, Signs etc...  Thanks so much!

    As for fonts, you don't need to do anything as long as you don't try to sell the actual font files. In print or the screen your fine to do as you want. Most fonts include a license EULA for you to read when installing them anyway.
    As for images, that may be a different story, it will depend on the image. If there is a file that accompanies the image that states you can do as you please, that fine, but other wise, assume the image is copyrighted and require permission to use.
    Some programs provide clipart that is for public use this clicpart can be printed and sold. But as with the fonts, you can not sell the clipart files themselves.
    In the EULA that accompanies the software, it should state what can be done with any clipart or fonts that are included with the software.
    If you are still in doubt, contact the company and verify it.

  • How to create fxplug transition for xcode and quatrz composer

    how to create fxplug transition for xcode and quatrz composer?

    Hi Mohan,
    You have to create and configure your system in the system administration tab in the portal.
    Usually, it looks like the following:
    System from template: JDBC System
    Connector properties
       Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
       Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
    User management properties
       User mapping type: admin, user
    Set the system with an alias.
    Go to user administration tab and map the user with VCRole to the configured system
    (the default for MSSQL is usauly user: sa and pw: admin)
    Save your changes and logon to VC with this user.
    The alias name should appear in your list of systems.
    Hope I helped,
    Shay

  • What are these files for ACCFinderBundleLoader_64 and ACCFinderBundleLoader_32? They appear in my Launchpad!

    What are these files for ACCFinderBundleLoader_64 and ACCFinderBundleLoader_32? They appear in my Launchpad!
    I am thinking to delete them because they disturb me when they have a place in the Launchpad among my applications.

  • How to design SQL server data file and log file growth

    how to design SQL DB data file and log file growth- SQL server 2012
    if my data file is having 10 GB sizze and log file is having 5 GB size
    what should be the size in MB (not in %) of autogrowth. based on what we have to determine the ideal size of file auto growth.

    It's very difficult to give a definitive answer on this. Best principal is to size your database correctly in advance so that you never have to autogrow, of course in reality that isn't always practical.
    The setting you use is really dictated by the expected growth in your files. Given that the size is relatively small why not set it to 1gb on the datafile(s) and 512mb on the log file? The important thing is to monitor it on an on-going basis to see if that's
    the appropriate amount.
    One thing you should do is enable instant file initialization by granting the service account Perform Volume Maintenance tasks in group policy. This will allow the data files to grow quickly when required, details here:
    https://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
    Also, it possible to query the default trace to find autogrowth events, if you wanted you could write an alert/sql job based on this 
    SELECT
    [DatabaseName],
    [FileName],
    [SPID],
    [Duration],
    [StartTime],
    [EndTime],
    CASE [EventClass]
    WHEN 92 THEN 'Data'
    WHEN 93 THEN 'Log' END
    FROM sys.fn_trace_gettable('c:\path\to\trace.trc', DEFAULT)
    WHERE
    EventClass IN (92,93)
    hope that helps

  • I have a lock field(boot.efi) in recycle bin how to put it out (for unlock and empty my recycle bin)

    I have a lock field(boot.efi) in recycle bin how to put it out (for unlock and empty my recycle bin)

    Trying logging out/in or a restart.
    If that doesn't allow you to empty the trash:
    Trash – Empty When File is Locked or in Use
    Trash FAQ       
    Maybe this will help:
    https://discussions.apple.com/message/17029415#17029415

  • How many GB are recommended for downloading and watching movies on an ipad?

    how many GB are recommended for downloading and watching movies on an ipad?

    I agree. With a 16 gig you'll find that you only have room for a couple of movies once the operating system and any other apps take up their space.
    The other alternative would be to look into something like a wireless harddrive, where you can store your movies and stream them to your iPad via an app. However if you're purchasing content from iTunes that may/may not work. So if you consider that you may want to dig a little deeper and make sure it'll do what you want it to do.

Maybe you are looking for

  • Re Install on New Drive wont reboot (mostly)

    Im going mad... We have had to move our mail server to another system and I have put a brand new drive in the xserve and done a clean install of Server 10.5 did all the updates etc. If I restart the Xserve, I get the mac icon and then it changes to a

  • I have no "add a device" section

    I wentg to the sync tab so that I could sync my laptop with my desktop. They are boht use MAC OSX 10.6. There is no add a device tab on either computer once I click on sync--or any other tab

  • Logging to Teststand log

    I am running a test sequence.  How do I log from the test sequence to the Teststand datalog? Solved! Go to Solution.

  • Music gone after update

    I had music on my Ipod that was stored on my old computer.  I updated my ipod from a different computer.  Now all my music is gone.  My old computer still works but it won't recognize my ipod.  Any suggestions? thanks,

  • Reinstalling Adobe Acrobat 8 into new computer

    I have a new computer and I would like to reinstall adobe acrobat 8.0 into my new system currently running Windows 7 Enterprise. The serial number is reading as invalid. What do I need to do to get it installed? Thanks in advance.