How to detect headphone is plugged in?

Hi
Please help me, how to detect headphone is plugged in or not?
Thanx.

Here's something to get you started:
https://developer.apple.com/iphone/library/documentation/MusicAudio/Conceptual/C oreAudioOverview/CoreAudioEssentials/chapter3_section11.html

Similar Messages

  • My ipod 5th gen won't change volume when headphones are plugged in, but when they are not I can change the volume on the speaker.  How do I fix this?

    My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker.  How do I fix this?

    Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
    B-rock

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • How to detect the Acrobat Browser Plug-in version installed on a users system for non-IE browsers?

    How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
    Or one script for detecting Plug-in version for major browsers. Need full example code.

    Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
    The script detects the browser type, and the installed acrobat version...
    Have a look here:
    Detect the Adobe Reader Plugin

  • How to detect plug-ins path for Photoshop CC?

    Hi
    I downloaded new CC SDK but unfortunatelly in html doc there is not info how to detect a plug-in path for new Photoshop CC. Pdf doc also contains very old info (still for Photoshop 5.0)
    - Could you advice how my installers can detect new Photoshop CC and detect a target place for plug-in installation? Forboth  win and Mac cases.
    - Is CC a pure 64bit windows app or it also can be presented into both C:\Program files and C:\Program files(x86) folders?
    Thanks
    Maxim

    Thank, Bartek, for your responce
    I checked this approach for CS4. In my winRegistry there is not {06870682-6f3c-4b97-9143-f03e85c0 bd3e} key. Should it work only for CC?
    Previously, I checked "HKLM\Software\Adobe\Photohsop" and found all presented PSD versions, like #12 for CS5, #55 for CS5.5 #60 for CS6. And Wow6432Node accordingly
    Will this approach work if I will search for CC the key like "HKLM\Software\Adobe\Photohsop\80\PluginPath" ? (if I had PSD CC I could check it but I dont wan to install it yet for dont break my currect working environment)
    Also, could you advise what it default installation path for Mac? Some like "/Applications/Adobe/Adobe Photoshop CC" ? Will CC have same plug-ins subfolder like previously versions?
    Best regards
    Maxim
    PS. Ilya, it means what I should check bot 32 and 64 bit windows versions and for CC also? 32bit windows version of CC is still available? wot is <version> key for CC? 80? CC? Do you know what is default installation path for CC on Mac?

  • [Solved]how to know if the headphone is plugged in or not?

    hi,
    i just want to know whether there is a package that can test if the headphone is plugged in or not?
    both of lsusb and dmesg dont work.
    thanks for your help and post.
    Last edited by yjcong (2012-09-24 07:01:56)

    brebs wrote:You could try to make sense of CONFIG_SND_KCTL_JACK.
    thank your for your link.
    i know how to solve my question.
    amixer scontrols
    to find the corresponding name. then
    amixer set "Headphone Jack Sense" off
    to disable it no matter the headphone is plugged in or not.
    these will be coded into my "alarm" script for nap.

  • My iphone5 thinks that my headphones are plugged in even when they're not. How can I fix this?

    My iphone5 thinks that my headphones are plugged in even when they're not. How can I fix this?

    Try inserting and removing headphones in succession 6-7 times.
    If this does not work, take it to an Apple Store or Apple Authorized Service Provider and have them evaluate it.

  • My phone thinks the headphones are plugged in and I can't get any sounds.  How to fix?

    My iphone 5 thinks that the headphones are plugged in and they are not.  I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones.  Any ideas on how to fix?

    I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.

  • IMac: How to use internal built-in microphone when Bose mic-headphones are plugged?

    Hi there,
    I use my  Bose AE2 for Lync conferences in my iMac, but the problem is that, when the headphones are plugged I seem "obliged" to use their  made for iPhone/Mac mic.
    The problem is that, however, the sound through this Bose's mic is terrible so the others in the conference can't properly hear me. So I just want to use the internal computer's mic, and it seems not possible when the headphones are plugged.
    In that situation, Sys Preferences > Sound > Input, only shows "External microphone" and "Line in".
    Meaning, what normally is "Internal microphone" automatically, when plugged, turns into "External microphone" and that's it. It's not possible to use the internal mic anymore if mic headphones are plugged.
    Do you know any way to workaround this?
    My OS is 10.6.8 (it's work's iMac), but I'm afraid this is not different in 10.9.X.
    Many thanks in advance!

    Hi, I plug in the headphones set with a regular  headphones jack plug. They don't go with USB.
    Thanks for answering

  • Dv6 Only plays Sound out of the built in speakers if headphones are plugged in ...please help

    My Pavillon Dv6 Only plays Sound out of the built in speakers if headphones are plugged in. It plays sound from both when there plugged in. Please hep me.

    Step 1:
    In troublshooting the problem you may follow the steps provided below.
      a. Click Start, type Sound in the Start Search box. 
      b. Click Sound in the search results at the top of the Start menu. 
      c. Click the Playback tab. Notice the check mark next to the default device. For most users,the default device is speaker, change it to headphones. Make sure that your audio settings are configured as expected.
    Step 2:
    On the Playback tab, select the playback device, click Properties, click the Advanced tab, and make sure that the Default Format is set to the value that you expect. When you finish, close this window to return to the previous window.
    Step 3:
    On the Playback tab, select the playback device, click Configure, and then make sure the configurations are set correctly.
    Method 2:
    If the issue persists then I suggest you to follow these below mentioned steps to mute all other sounds when windows detects any communications activity.
      a. Click Start, type Sound in the Start Search box. 
      b. Click Sound in the search results at the top of the Start menu. 
      c. Click the Communications tab.
      d. Click on the radio button according to your convenience, under When Windows detects communications activity.
    After performing the above steps you may check for the issue.
    For more troubleshooting you may visit this below mentioned link.
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems 
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • MBP Retina wont detect headphones

    Hey guys,
    I just recently got my laptop back from repairs after being water damaged.
    Everything seems to function fine except my headphone output won't detect when I plug in a 1/4" jack.
    Tried alt/opt clicking the sound icon as well as going to the sys. prefs. with no luck.
    As far as I can remember it works fine in bootcamp Win 7, but nothing happens in mac os.
    Will post if I am remembering wrong as I use external sound cards most of the time.
    Just blows to not be able to use headphones elsewhere when on the road.
    I suppose this would be software related, but I have no idea how to solve it.
    Any help would be appreciated!
    Cheers,
    Jamie

    Apple has 90 days warranty on all repairs.  Take the computer back to the repair shop along with the headphones. 

  • IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

    I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
    This is what happens:
    When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
    When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
    It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
    The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
    I have also restored the device in itunes, with no luck.....
    Thanks in advance for any useful answer!

    Thanks for your answer...
    The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
    The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
    I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

  • How to detect color pages in a PDF?

    I am using a C++ Acrobat plug-in do read/edit a PDF file.
    I need to get the total number of pages in the PDF as well as the page numbers of color pages.
    So far I have been able to get the total number of pages using PDDocGetNumPages() without any trouble.
    However, I cant seem to find an API that lets me know whether a particular page is color or not. Is there a way to do this?
    Thanks in advance!

    But what if there is RGB data that means black or gray (R == G == B), does that mean black or RGB?
    There is some sample code in the SDK for iterating over the content in the PDF, and then you can get the colorspace and the color of each object.
    But you really need to do some background research on colors & colorspaces to properly achieve this goal.
    From: Sachintha81 <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Wed, 8 Feb 2012 16:57:10 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: How to detect color pages in a PDF?
    Re: How to detect color pages in a PDF?
    created by Sachintha81<http://forums.adobe.com/people/Sachintha81> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4194889#4194889

  • Speakers only work when the headphones are plugged in

    I have an HP Pavilion dv6-6163cl.  I purchased it about 1 year ago.  I use windows 7 and have not altered anything.  My internal speakers stopped working about a month ago.  I uninstalled the IDT audio driver and reinstalled it with the updated driver.  I ran troubleshoot and it said they are working properly. 
    I noticed that if I plug in headphones or external speakers into the headphone jack, then the internal speakers do work and turn on.  This is backwards.  The internal speakers should work when nothing is plugged into the headphone jacks.  There is no setting in sound settings or driver settings to fix this.
    I never used headphones or plugged anything in to the headphone jacks, so I'm not sure what changed.  How do I fix this?

    Hello cgoldberg11,
    Take a look at this link, which has troubleshooting steps that should help you resolve this issue.  Please let me know if this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • IMac Doesn't Detect Headphones

    I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it always comes out of the internal speakers, no matter if the headphones are plugged in or not (the headphones also work fine when plugged in somewhere else). I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in. Does anyone have any suggestions on troubleshooting?
    I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were replugged in after the upgrade.

    It sounds like the head phone jack has been damaged. If they were connected to a port they weren't meant for, that can happen. And that in turn, can damage your audio output port.
    Try disconnecting everything but the keyboard and mouse and reboot the iMac. See if that makes a difference.
    Resetting the SMC only provides this kind of support:
    -Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
    -Handling system resets from various commands.
    -Controlling the fans. so I doubt it can fix the audio issue.
    Check the headphone port really close, make sure there isn't any dust or link or anything that might keep the jack from connecting properly.
    Carolyn

Maybe you are looking for