How to determin if i have 5.0 or 4.o

i need to know weather i have 5.0 or 4.o in order to set my web cam

I used to get about 300 kb/s with USB and I get in excess of 3 Mb/s with USB2. As the other reply says, sounds like USB.
To upgrade to USB2 get a PCI USB2 card. Make sure to get a reasonable quality one e.g. Belkin or Adaptec.

Similar Messages

How to determine which phone have a build-in accel...

Hi,
I know that the following phones have a build-in accelerometer:
N95, N82, 5500
But what about future N-Series phones?
Why is this HW feature nowhere documented?
If you look at http://www.forum.nokia.com/devices/matrix_all_1.html I can see some HW features of Nokia phones. But nothing about accelerometer. On the pages for N95 or N82 there is no information about this.
So, I suspect if a future N-Series phone, e.g. N83 or N79, has this HW feature it will be nowhere documented.
Why is this kept a secret?
Or is there a comprehensive list somewhere of all Nokia phones which support this HW feature?

In iPhoto make a smart album with camera = "the camera you want"
All the photos taken by that camera will be collected into the album
LN

How can I determine which machines have activated Adobe Acrobat Standard 9?

How can I determine which machines have activated Adobe Acrobat Standard 9?

Hi jrector3,
You need to go to the respective machines and launch Acrobat and check if it prompts for serial number.
You can also go to the help menu and check if 'Deactivate' option is highlighted.
Regards,
Rave

How do I determine whether I have PCI Express v1.1 or v2.0?

This article in Mac Fixit states that computers with PCI Express v1.1 slots will NOT be able to take full advantage of OpenCL in Snow Leopard:
http://www.macfixit.com/article.php?story=20090612121357227
... In terms of PCI Express, My Mac Pro is on the cusp. PCI 2.0 was announced in January 2007 and presumably made it's way onto the assembly line a few months after that. I bought my refurbished Mac Pro in June 2007. I can't determine in the System Profiler if I have PCIv1.1 or v2.0. Does anyone know how to find out? MacTracker and machistory.com haven't answered the question. It seems some of the MacPro1,1 models shipped with v1.1 and some with v2.0. How do I determine what I have? Thanks for your help!
SPECS FROM MY SYSTEM PROFILER (SERIAL RM727......)
GRAPHICS/DISPLAYS
NVIDIA GeForce 7300 GT
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
PCI CARDS
NVIDIA GeForce 7300 GT
Name: NVDA,Display-B
Type: display
Bus: PCI
Slot: Slot-1
Vendor ID: 0x10de
Device ID: 0x0393
Subsystem Vendor ID: 0x0000
Subsystem ID: 0x0010
ROM Revision: 3008
Revision ID: 0x00a1
Link Width: x16

How do I determine whether I have PCI Express v1.1 or v2.0?
Hi,
Open Apple System Profiler (About this Mac:More info) and look at the Hardware: Model Identifier. If it says Mac Pro 1,1 or Mac Pro 2,1 you have PCIe v1.1 slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro/
If it says Mac Pro 3,1 you have PCIe v1.1 in slots 3 and 4 and PCIe v2.0 in slots 1 and 2.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2008/
If it says Mac Pro 4,1 you have PCIe v2.0 in all four slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
Hope that helps!

How to determine the if I have iPad 2

How to determine the if I have iPad 2

Put your serial number (Settings > General > About > Serial Number) in on this page and it should tell you

How to determine I have 32-bit or 64-bit 2008 R2 edition?

I have SQL Server 2008 R2 installed. How to determine whether it is a 64-bit installation or a 32-bit.
In case it is a 32-bit edition, can I upgrade it to a 64-bit edition? If one PC has 32-bit installed and the Server has 64-bit installed, is it possible to work with database files irrespective of whichever bit edition it is?

Hello,
Please run the following command on SQL Server Management Studio:
SELECT
@@version
on the results you will find the answer.
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1765.0
(X64)
Feb 2 2011 17:33:22
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
(1 row(s) affected)
About migrating from one platform to another, yes you can do that with a side-by-side upgrade because SQL Server setup does not allow cross-platform upgrade.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Have situation on a unprotected wireless when accessing I cannot get a router address. I'm on system 10.6.8 on MacBook Pro summer 2009. Any thoughts on how to determine what's up?

Have situation on a unprotected wireless when accessing I cannot get a router address. I'm on system 10.6.8 on MacBook Pro summer 2009. Any thoughts on how to determine what's up?

You have basically verified that the issue is NOT with your MBP, but with this particular Wi-Fi network. Even though it may be unsecured, the provider may have elected to configure it for MAC filtering. In this case I am referring to the MAC (Media Access Control) address and not your Mac laptop itself. If this has been enabled, your Mac would only be able to connect if the Mac's MAC address was added to that filter.

How to determine number of photos I have?

I cannot find anywhere in Photoshop Elements where it tells the total of photographs I have in my collection. The old version told this number in the lower right hand corner. Is there somewhere in this newer version where I can find how many photos I have without having to count them? Please help. Thanks.

Thanks so much Neale!!!
In a message dated 2/19/2014 7:05:52 P.M. Eastern Standard Time,
[email protected] writes:
Re: How to determine number of photos I have?
created by nealeh (http://forums.adobe.com/people/nealeh) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6137888#6137888)

I have an ipod I want to sell, but I don't know how to determine the specs, which one it is, how much memory, etc. Where can I find this information?

I have an ipod I want to sell, but I don't know how to determine the specs, which one it is, how much memory, etc. Where can I find this information?

See this Apple support document.
http://support.apple.com/kb/ht1353
B-rock

How to determine the version of Adobe Reader X I have

How to determine the version of Adobe Reader X, I have

I am in the software, where can I find it?
On Tue, Jan 27, 2015 at 9:59 AM, Sara.Forsberg <[email protected]>

How to determine logical database in a program?

Hello guys!
How to determine logical database in a program on Eclipse?
I have not found any options:
Thanks!

Welcome to SDN
Check the table RSOSFIELDMAP
Assign points if useful
Regards
N Ganesh

Anyone know how to determine Macbook Air screen tech? Causing migraines

Hi There,
Last year, I expereinced a lot of mild migraines which I've traced back to a new Macbook Air.
At first I had no idea of the cause (diet, stress etc) but have noticed that my eyes feel uncomfortable looking at the screen of my Macbook Air (I don't have this issue with my Dell monitor).
My eyes don't hurt per se, but I can detect a sublte jittering with the screen - which can turn into a migraine.
After doing a bit of research, it seems like most (but not all) LCD and LED LCD displays use something called pulse-width modulation to control brightness but after calling Apple support, they told me my MBA doesn't use this technology.
Does anyone know how to determine the underlaying technology in Apple displays so I can research the cauase of my headaches? I found a good Ukranian website (in english) that explained pulse-width modulation but it didn't really talk about other technologies.
Any pointers in the right direction would be much appreciated.
Cheers
Ben

What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor:

How many tasks can I have in NI-DAQmx system?

I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free). For hardware we'll use your PXI modules (because your hardware is ultra-reliable). I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand. I am doing the system software architecture now. I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels. Help hasn't helped much. Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way.
We want something much more akin to random access memory. We'll have UUTs of different kinds coming on and off at random times. Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s. It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) . It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq. Even with two devices, can I only have one analog input task running? Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
I'll also have Daq digital IO and two 6509 digital io modules. Do I have to cram all of that into some "task" concept too? The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output). How many tasks can I have for that stuff? On the DMM card I can measure capacitance amoung other things. Will I have a capacitance task? The idea of a "capacitance task" hurts my head.
Golly I hate tasks. Please help.
I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
Dave

Dave,
Thanks for posting to the NI Forums.
For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email. If you want to move to email support I recommend contacting NI through the email route.
I will answer your questions here. If you need more direct contact please feel free to contact us through [email protected].
For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple. A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.) and a single timing configuration (sampling rate, continuous vs. finite, etc.). It is a way to organize configuration data.
The concept of a task is an abstraction like OO programming. Like OO programming it may take some time to understand but can be a time saver in the end. Also like OO programming it does add some initial programming overhead. It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
With very simple applications OO programming sometimes does not make sense. But as a program gets more and more complex OO programming becomes more and more useful. It takes some learning but it is worth it.
I believe the concept of a task does the same thing. It does not change the actual functionality of the device or add excessive overhead. It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations. You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time. In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate). You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation. There is a single timing engine for AI, one for AO, and so forth. You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
However, tasks can exist even when they are not being actively run. You can create all the tasks you need at the beginning of your program and simply start and stop them as you need. After the task is stopped you do not need to clear the task until the end of your program. You can further increase performance by moving the Task into the latest state possible without actually starting the task. This can be done by calling myTask.Control(TaskAction.Action). The Task states are further explained in the NI-DAQmx Help Manual.
The concept of a task will need to be used with any device that is being programmed using NI-DAQmx. The 6259 and 6509 will need to be programmed using DAQmx. With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API. The SWITCH API does not use the concept of tasks. For the 4072 you will need to use the NI-DMM API. This API also does not use the concept of tasks.
Hopefully this information is helpful. Let me know if you have any additional questions or concerns.
Regards,
Neil S.
Applications Engineer
National Instruments

How to tell if you have OEM 12c BP1 installed?

I had OEM 12c installed and attempted to download/apply the Solaris OEM agent software. I ran into the "Below host metric patches are not applied to OMS." error. I discovered this was because I needed BP1.
After 3 days of trying to uninstall OEM, finally got it uninstalled, downloaded OEM 12c w/BP1 and installed it.
Once again, I tried to download/apply the Solaris OEM agent software...and I got the same error message. Very frustrating.
I don't see anything in the "About" pop-up or "emctl status oms" output that actually says a BP has been installed though. Could I have just reinstalled the non-BP version? I got the installations zips directory from the Oracle website that says "Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) for Linux x86-64
(With Bundle Patch 1)" so I don't think that's the issue. Is there something else I need to do to get BP 1 working??

Few things:
a) If you have linux oms with bp1 and want to deploy solaris agents ( with bp1) then you need to follow the steps from this doc:
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/aix_solaris.htm#CIHJJGDG
You will be required to apply patches on OMS and plugin homes on OMS.
b) If you want to find wether the OMS installed has bp1 or not follow the note: How to Determine if EM Cloud Control 12c with bp1 has Been Installed (Doc ID 1424439.1)

How to tell if you have a duplicate adobe id to download e-books to reader

We recently updated our computer to Windows8 and lost the adobe reader and all the downloaded books purchased from Kobo. We are unsure if & what our adobe ID was, we have one know but now we cannot download any books because it gives the following error message.
Part one is - Application detects ebook download. Do you want to import this book? YES or NO if you say YES then the next message is Unable to import the item. It already exists in your library. The library does not exist. We have contact Sony(as that is what the reader is) and have talked to Kobo and have determined it is the adobe portion.

Few things:
a) If you have linux oms with bp1 and want to deploy solaris agents ( with bp1) then you need to follow the steps from this doc:
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/aix_solaris.htm#CIHJJGDG
You will be required to apply patches on OMS and plugin homes on OMS.
b) If you want to find wether the OMS installed has bp1 or not follow the note: How to Determine if EM Cloud Control 12c with bp1 has Been Installed (Doc ID 1424439.1)

How to determin if i have 5.0 or 4.o

Similar Messages

Maybe you are looking for