How to determine ACR version in Lightroom 5?
I have Lightroom version 5. How do I determine what version of Adobe Camera Raw is installed with it? I want to get a new lens so I'm interested in checking compatibility. Thanks.
In LR, do Help / About Adobe Photoshop Lightroom x.x.x to see what x.x.x version of LR you’re running.
The LR 5.7.1 update, which is the latest one, was rushed out to fix a problem with NX processing, as well as adding Sony Alpha 7 II support. I believe the LR-has-an-update detection does not see LR 5.7.1 as a new update if you have LR 5.7, at least with the serial-number-activated version. You can always download the update from the Adobe Updates page:
http://www.adobe.com/downloads/updates
I myself have the CC-licensed version of LR 5 and I did get an Install button next to Lightroom in my CC Apps list, indicating there was an update, although normally there would be an Update button not an Install button so the CC deployment was slightly off, as well.
Similar Messages
-
How to determine the version of Adobe Reader X I have
How to determine the version of Adobe Reader X, I have
I am in the software, where can I find it?
On Tue, Jan 27, 2015 at 9:59 AM, Sara.Forsberg <[email protected]> -
How to determine full version of latest adobe reader
Hi,
How can I determine full version of latest Adobe Reader without installing Adobe Reader?
I mean I need to know 4th digit of version, it is the most important for me.
Adobe Shockwave and Flashdownload pages provide such informations via JSON from
HTTP request.
Reader download website shows me only 3 digits 10.1.3 and I need to read 10.1.3.23
to automate my security checker.
Thanks in advance for reply.
Daviddaviddavid3 wrote:
No it's not true. latest version is 10.1.3.23.
Latest digit is probably security patch.
The latest digit is the build number. This may be different for different modules; you may find DLLs that have a higher build number than AcroRd32.exe
If there is a new security release, it will be identified by the first three digits. -
5s How to determine which version of operating system is currently installed
How can I determine which version of the operating system is currently installed in my 5s without having to go to iTunes using my PC?
Tap Settings > General > About.
-
How to Determine .INDD version?
Hi,
Can someone give me information on how to determine version number of .INDD file using JScript or C# using SDK?
Thanks
VishHi. Get a connection and do this:
DatabaseMetaData dm = conn.getMetaData();
System.out.println( dm.getDriverVersion() );
This info is not available via the console.
Joe -
How to uninstall previous versions of lightroom?
how do you uninstall previous versions of lightroom?
Do you also need to delete any folders?
I have Updated to the new LR CC version a couple of days ago and need space.Knowing whether you are using a Mac or a PC would be rather important to answer your question.
Anyhow, there is not need to delete any program folder manually. Simply use the respective method of your OS.
LR CC created a copy of your LR5 catalog and upgraded it. If you remove LR5 you might want to remove the catalog file as well as the preview folder (make sure not to delete the new ones of LR CC ).
Here is how to find everything: https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html -
How to Determine What Version of JDK I Have?
Hi,
How do I determine what version of the JDK or SDK is installed on our server?
Thanks,
KenThere isn't any readme or license file in the JDK folder. Our JDK is not direct from Sun, it came with WebSphere App Server, so maybe IBM left out such files. Anyway, the "java -fullversion" command works. Thanks!
Ken -
How to determine the version of xmlparserv2.jar?
Hi,
Is there any way I can determine the version of an
xmlparserv2.jar file?
I am using XML Parser V2 (xmlparserv2.jar) with the following
file size: 1,086,234 bytes.
This was supplied with JDeveloper 3.1 but I have no idea what
version is it? Any help on this will be appreciated.
TIA,
-Piyushthe class oraxml does not exist in this version of the jar!
however i do see an entry like: xmlparser_2.0.2.6_production
when i open the jar file in winzip!
i have cross verfied with other xmlparserv2 files (diff file
sizes) and this seems to be it.
thanks for the suggestion.
regards,
-Piyush -
How to determine the version of Forms (Old version)
Can anyone help me determine the version of forms running on a Unix server, I believe it is either 2.3 or 3.0?
Thanksls $ORACLE_HOME/bin|grep formsIf there file sqlforms30 is in result of command , then run:
sqlforms30 and in appeared screen you can see version. As sample:
SQL*Forms Design: Release 3.0.16.12.9
If there is no any sqlforms30 in directory $ORACLE_HOME/bin your version is not 3.0 :)))
In this case run file with name forms and u'll find out the answer for your question.
Best regards, Natalia -
How to uninstall previous version of Lightroom without affecting new version
I just upgrade from Lightroom 1.4 to 2.1
But I know have 2 version of Lightroom on my computer. I want to uninstall 1.4 without affecting my back-ups and my stored edit which are all in place for 2.1.
I figure I could probably do this safely by backing up the Lightroom folder below in case it's removed while uninstalling 1.4. But before I go ahead and do this I would like to be sure.
Below is the location for where I think is my Lightroom Back-ups.
C:\Documents and Settings\All Users\Documents\My Pictures\Lightroom
Thanks.There is no point installing 2.0 indeed. The 2.1 installer is a full installer and will take the 2.0 serial. You cannot use a Lightroom 2 catalog in 1.4. When you upgrade a catalog, Lightroom will automatically upgrade a copy and keep the old 1.4 catalog untouched, so you can still use that in the old version. They won't be kept in sync however going forward.
-
How to determine firmware version of brick?
Is it possible to determine the firmware version that the logic board has installed? I might be wrong about how the firmware operates, but the word 'firmware' to me usually implies flashing the BIOS. I know what version of 'firmware' the OS portion of the HDD has installed, but I'm not sure that it matches the BIOS and I'm still hoping I can revive the unit without repartitioning, etc. Background - I made the boneheaded mistake of trying to run sudo apt-get install -f <whatever> and was left with an SSH session where only bash built-ins would even run. No `ls`, no `cat`, no `sudo`. I tried to revive the system as best I could while the SSH session was still open using the errors reported and using this guide to abuse shell built-ins to recover a system in this state. But I ran out of time and had to close the connection (on a laptop). After this the system would power up but stay at white light LED indefinitely. So I popped the HDD into a spare linux machine and confirmed the drive looks fine - all data there and the OS RAID partitions were easily browsable. So I reimaged the OS RAID partition with rootfs.img from several different firmware versions (I really don't know whch one I was running as I've updated a few times but not sure when last), but still no luck. Am I wrong in assuming there's a BIOS update as well when we talk about 'firmware'? Am I missing some steps after reimaging the OS partition? Any help would be very appreciated.
I ended up soldering leads on the main board and captured the boot log. I managed to find only one other boot log to compare to (here) but comapring the two hasn't given me much insight. On the surface it seems like my issue is that the AHCI SATA loader is trying and failing to get port 0 to respond. I've posted the full boot log here, but I'll post the last bit here in hopes that someone can point me in the right direction. Thanks. Hit any key to stop autoboot: 0
init_sata:
serdes: 24Mhz ref clk
Serdes 1 : CMU OK
Serdes 1 : Lane OK
Serdes 2 : CMU OK
Serdes 2 : Lane OK
cap 0x6f26ff81 port_map 0x3 n_ports 2
P#SERR 0x4050002
IS 0x0
Port 0 control: 0x300
Port 0 status: 0x123
P#SERR 0x0
IS 0x1
Port 1 control: 0x300
Port 1 status: 0x0
GHC 0x80000000
GHC 0x80000002
ahci_init_one: SUCCESS
SATA Controller Info:
AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part
Enter start port: 0
Port 0 status: 123
cmd_slot = 0xb06000
Device not ready. BSY, DRQ or ERR in TFD!
Can not start port 0
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 7 not an environment
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 8 not an environment
timeout exit!
GPT header not found
Bad Magic Number
arg1 char: s
Barebox-C2K >/ -
How to determine different versions 7950 Twin Frozr?
Hi all,
I have got myself an MSI 7950 Twin Frozr and I am really happy with it thus far. I had a question though, in time I want to get a second one for crossfire and I read that there are different versions. A OC version, a BE version, a V2, with a 7950 board, a 7970 board etc. How can I determine which one I got so my second card will be the same?
Many thanks in advance!I have got the 7950 OC Boost edition, apparently on a 7970 board (it has a 6 pin and 8 pin connector). Do all the OC BE editions have a 7970 board, and if not, would it be a problem if I pare the 7970 one with one with a 7950 board?
-
How to determine JDBC version?
How do I determine the JDBC driver/version that is associated with a connection pool in a running instance? I don't see JDBC info when I right-click on the console/properties in the Admin tool. I am using ver. 7, sp2.
Hi. Get a connection and do this:
DatabaseMetaData dm = conn.getMetaData();
System.out.println( dm.getDriverVersion() );
This info is not available via the console.
Joe -
How to determine the version of Identity Manager 9.1 with the build number
Friends,
I have a query this compilation of Identity Manager that show below that corresponds Identity Manager version: 9.1.0.1, 9.1.0.2 or 9.1.0.3
As I can determine this information.
Diagnostic Dashboard
System Information:
Application Server: JBoss
Oracle Identity Manager Installation:
Product Version: *9.1.0.1860.16*
Build Number: 1860.16
Host: serveroimoooo53
Location: C: / IOM / xellerate
ThanksThat is version 9.1.0.1 base installation.
You can find the information by logging into metalink (http://metalink.oracle.com) and searching. I used the Build Number to return results.
-Kevin -
I
Thanks, ssprengel!
Updates did not install a version of ACR that would handle the files. I found the link to ACR 8.7 on another thread, but it wouldn't install on Snow Leopard.
Camera Raw plug-in installer
Fortunately I had an available install of Lion, and that did the trick -- ACR 8.7 is now installed and I can see my images! Thanks for your help.
cheers,
Bob
Maybe you are looking for
-
One iTunes, two computers, two iPods help?
I have one iTunes account shared between two computers. An iPod touch is on each computer. How can I separate the account but yet have the same one? I hope that this makes sense to everyone wanting to answer. I also found that if I purchase a song on
-
Intra company stock transfer without delivery
Hi, Can anyone give me the configuration steps for the intra company stock transport order by using UB type (Between two plants with in same company code) with out delivery.
-
My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.
-
Wacom Problems Intuos4 iMac 27"
I am getting the "A supported tablet was not found on the system" on the System Prefs. It is plugged in. I have installed the latest drivers. I have even removed and reinstalled using the Wacom Tablet Utility as per discussions I have found here. I h
-
Siri stops working after syncing with computer
I just got my iphone 4s yesterday. Everything was working great until i tried to sync my iphone with my computer and then Siri stop working. It kept saying that "i am having problems connecting to the network." If i restore my iphone it works great a