How to determine Chord and BPM

Hi everyone,
I'm a garage band beginner. I've successfully recorded 2 songs with loops, harmonies, and vocal tracks - even the occasional editing of a loop but I have difficulty when I start up a new project trying to determine chord and bpm - well, mostly bpm.
There is a song I want to cover and customize myself. Is there anything in garage band or anywhere on the web that anyone knows of where I can play a song and it determines the bpms?
Thanks in advance for your help.

Thanks HangTime! What do I multiply it by?
Multiply it by the seconds I counted?
This is going to help TONS going forward.
Message was edited by: Macthang

Similar Messages

How to determine Frozen and Running apps?

For the purpose of saving battery life, how do we determine frozen and running apps? Is there a tool available for this?

Thanks HangTime! What do I multiply it by?
Multiply it by the seconds I counted?
This is going to help TONS going forward.
Message was edited by: Macthang

How to determine INT and FLOAT in a DECODE statement

Can anyone help me with the following problem:
I have a column defined as a NUMBER(15,4). I am trying to determine the java type using the getScale() method in ResultSetMetaData. When the scale is greater than 0, then it is an float, else it is an int. In this case, the getScale() method should return 4. However, when querying with a DECODE statement on the NUMBER(15,4) field, the getScale() method always returns 0 and the value is therefore converted to an int. Anyone knows how to solve this problem?
Thanks

Alcides,
Oracle NUMBER data type is mapped to "java.math.BigDecimal" class.
You will find more information in the JDBC Developer's Guide and Reference which is part of the Oracle documentation and available from:
http://www.oracle.com/technology/documentation/index.html
Good Luck,
Avi.

How to determine height and width of a JScrollPane client

Hi,
I wish to display a webpage in a JScrollPane and wish to determine the height and width of the HTML content so that I can use the information to generate PDF and control the content on each page. Can anybody let me know how I can do this?
Thanks in advance
Prashant Baj

JEditorPane and getSize()?

How to determine Tax and Basic amount from BSEG entry

Hi Guru's,
How can I determine from the BSEG table the following lines for one BELNR?
I need to know the TAX amount and the basic amount (without TAX). When I search the bseg table I see tree lines and the field DMBTR contains all values but I need to determine which line is the line with tax amount and the line with the basic amount.
Hope someone can help me out.
Best regards.
Edited by: Julius Bussche on Jan 9, 2009 1:58 PM
Please use meaningfull subject titles.

Hello,
How can I determine from the BSEG table the following lines for one BELNR?
I need to know the TAX amount and the basic amount (without TAX). When I search the bseg table I see tree lines and the field DMBTR contains all values but I need to determine which line is the line with tax amount and the line with the basic amount.
In our system we have BSEG-BUZID: 'T' (for Tax items)
For the Tax line:
BSEG-HWBAS: Tax Base Amount in Local Currency
BSEG-DMBTR: Tax Amount in Local Currency
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Jan 9, 2009 1:39 PM

How to determine rows and columns of a two dimensional array at runtime?

Dear All,
I am using Java 5.
I have defined an array as follows:
int[][] arr= { {1,2,3}, {4,5,6}};
Using the reference of arr, how can i get the rows (2) and columns (3) of this array at run-time?
Thanks in advance.
-Sameer

rows and columns are simply the way you visualize the array.
int[][] arr= { {1,2,3}, {4,5,6}};
in above code
if you access array element as arr[x][y]
then x can have 0 or 1 where y can have 0,1 or 2
*/

How to determine type and access of REF TO DATA

Hello experts,
I have a structure with two fields, one string as name/ID and the second one REF TO DATA as placeholder for any value, so DATA can take for example another string or a numeric value or whatever. Ok, now I want to handle this DATA based on it's type, which is unknown at that point. So I first DESCRIBE the field (its type). If for example this type results in a string, I want to move this string data from REF TO DATA into a local string value. Then I want to reformat the string value and save it again to the REF TO DATA field.
So, in short, I have these tasks:
1. determine type of REF TO DATA
2a. if it's a string, then move the val. of the string into a local string variable
2b. or alternatively do something else, if it's not a string value
3. do something with the local string, then save it back to the REF TO DATA field
Any ideas?
Thank in advance for your help!
Kind regards, Matthias

Hi Matthias
I think you missed a little and very important detail here:
ASSIGN ls_rec-value TO <fs>.
That's not what we want, instead you need to use:
ASSIGN ls_rec-value->* TO <fs>.
That's why you are obtaining this type 'l' which is refering to a TYPE REF TO DATA itself. Doing it the right way your final type would be 'C' which corresponds with a character data type.
Best Regards

How to determine model and specs using serial number

I am usually a PC guy, but I recently acquired a damaged MacBook Pro 15 mid 2010 and would like to determine the parts inside ie; processor, motherboard. Is it possible to get these specs by using the serial number? Any guidance would be appreciated .

This site is thought to be benign:
http://www.appleserialnumberinfo.com
as is this one in the netherlands:
http://www.chipmunk.nl/klantenservice/applemodel.html
Once you know a little more, detailed specs for every aspect are available on:
http://everymac.com

How to Determine BHCA and ACH in UCCX Environment v8.5.1

Hi,
I need to calculate the busy hour call attempts and average call handle time in a UCCX environment.
I know for a UCCE you can simply run a SQL query, but I am having trouble with the UCCX.
UCCX version is 8.5.1
Thank you,

"The Traffic Analysis Report shows information related to any call that hits Unified CCX. In that sense, it is an accurate reflection of BHCA (Busy Hour Call Attempts).
To get the BHCC (Busy Hour Call Completion) from Unified CCX perspective, we need to calculate BHCA - (all aborted calls + all rejected calls). The Aborted and Rejected Call Detail Report can help retrieve that information."
http://docwiki.cisco.com/wiki/Which_reports_should_be_used_to_determine_BHCA_and_BHCC%3F

How to dynamically determine Receivers within BPM

Im trying to design a way to determine my receivers within my BPM process during runtime.   My Scenario is as follows:
SAP IDOC
    V
XI
             XI uses JAVA Mapping MT1 to determine vendors and if customer receives PIDX
                         JAVA Mapping MT2 to creates the PIDX output file if required
V
SENDs to required Vendor (PIDX if required otherwise email)
My problem is how to dynamically determine the appropriate receiving vendor for my PIDX.
I can not use the condition editor on the standard Receiver Determination because the output message (PIDX) doesn't have specific enough information to determine the vendor.
Other than the customer number there are no other values and we don't want to use customer number because each vendor can have multiple customer numbers (hundreds).
I've tried various attempts but none seem to work. This could also be because I have limited knowledge of BPMs and this is my first complex development. Below are the different attempts I've made at dynamically determining the receiver. Any input would be appreciated.
Receiver Scenario 1
I developed an interface mapping with MT1 as input and the SAP Receiver Determination as output. The problem is for me to use this, the interface mapping had to reference the PIDX output (MT2 instead of MT1) which has no data that I can use to determine the receiver.
Receiver Scenario 2
I added a receiver step right before my send step and used the receiver list. This appears to send the PIDX to everyone in the list and there is no way to evaluate or eliminate a name from the list.
Receiver Scenario 3
I created a context object in the Integration Builder and assigned it to a field in MT1. I then added a switch step with a branch for each vendor. Within each specific branch there is a Send step that has the context object name I created in the "Send Context" field. However, on the configuration side Im unable to access the context object which I created on the design side. Whenever I open the condition editor and select the radiobutton for "Context Object" the list does not include the context object I created in the Integration Builder.

Hi,
Try using the enhaced receiver determination concept.
Maybe based on certain field values you can write a UDF which calculates the receiver.
Try this Blog out
Link : [
http://help.sap.com/saphelp_nw70/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm]
Regards,
Abhishek
Award if helpful.

How to attach image in BPM CustomJSP and view it

Hello everyone im new here ,
Is there any tutorial how to attach file into BPM Object ?
Im using Oracle BPM Studio 10.3.1
I have seen many tutorial how to attach file into BPM using fileChooser
( https://community.oracle.com/thread/880712 )
and succeed but my next problem is how to show image that i have been uploaded before
Thaaanks
Regards
Shiddiq

Hi Shiddiq,
You can get access to an uploaded file using the execData object.
For example, you can use execData.attachment[1].name to retrieve the file name of your first attachment.
Similartly use execData.attachment[1].contents to retrieve you first file contents in a base64 format.
Antonis

How do you determine StringBuffer and List capacity?

hi all,
I'm curious and would like to post this query that how to determine the StringBuffer and List capacity after read some of the Java Platform performance book. Some of this performance books simply tells number of capacity brieftly without telling what and how does the capacity stand for.
First, the book mentioned StringBuffer(50). Note, my question is that what is this 50 stand for? 50 Characters? or any. Can someone help me to rectify this?
Second, List. ArrayList(0.75). And what is this 0.75(by default) stand for? A heap space? Then how many of them? How many objects that can be stored for not to "exceed 0.75"?
Please help. :)
regards,
Elvis
scjp

I think the capacity is the CURRENT size of a container. But it is not equal to the number of elements that container currently hold. Just like, a house can have 10 people within, but problably only 3 people at some time. Also, the capacity is not equal to the maximum size, because container can grows automatically.
For example, a container whose capacity is 50, currently has 30 elements in it. If you add 10 elements more. That is only an addition operation. But if you add 30 elements to it. Then the container first enlarge its capacity according to some arithmetic(a enlarging rate), secondly carry out the addition operation.
Now that the capacity is the size, it should be a number standing for HOW MANY elements.... In the case of StringBuffer, it should be how many chars; in the case of ArrayList, it should be how many Objects. I do not think 0.75 can stand for a capacity. Prabaly, it was used to describe the enlarging rate when containers need to contain more elements than its current capacity. ( From JDK API, you can see the type of capacity is int ).
For containers and alike, the questions "how many I can hold" and "how many I am holding", "Do I can enlarge"? are helpful for understanding how it works.

In app store some applications are of very small size like 15-20 Mb and after installing them they become more than 100 mb. how to determine their actual size???

in app store some applications are of very small size like 15-20 Mb and after installing them they become more than 100 mb. how to determine their actual size???

The app store size is probably just the software, while the size on your iPhone includes data.
You can determine the size on your iPhone by looking at Settings > General > Usage.

Hi Regarding How to work on SAP Net Weaver CE 7.1 and BPM

Hi Friends
I need Some help from u r side
Currently i have got work on SAP Net Weaver CE 7.1 and BPM (Business Process Management)
How to Work on these SAP Net Weaver CE 7.1 and BPM (Business Process Management)
If u have any Documents .can u give that links
How Configure SAP Net Weaver CE 7.1 with NWDI can u tell me this think also
Regards
Vijay

Hi Friend,
You can follow following pointers hope it will help.
[SAP NetWeaver MDM-7.1 Key Mapping interoperability with SAP NetWeaver Process Integration-7.1 using Web Services u2013 Webinar Presentation|FEATURED EVENTS;
[Best Practices Workflow for Master Data Managemen|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f1c01b-972d-2c10-3d9d-90887014fafb]
[Best Practices on Workflow Tools Usage for Master Date Management (MDM) Scenarios - Webinar Presentation|http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/c0fee6f1-8795-2c10-8ca9-e4883bae5e81]
Regards
Jeetendra

How to determine current period start and end dates

Hi All,
If given previous period start date and end date, how to determine current period start date and end date?
Suppose if given previous period start and end dates are 12/28/08 - 01/30/09, then current period start date and end date will be 01/30/09 - 02/27/09. (where 12 is the previous period, 28 is the day, 08 is the year......)
Can you please suggest an FM to determine the current period dates?
Thanks & Regards
Gowthami

>
gowthami karunya wrote:
> If given previous period start date and end date, how to determine current period start date and end date?
> Suppose if given previous period start and end dates are 12/28/08 - 01/30/09, then current period start date and end date will be 01/30/09 - 02/27/09. (where 12 is the previous period, 28 is the day, 08 is the year......)
Hello,
I am assuming you have the Company Code with you & proposing this solution.
TABLES: bkpf.
PARAMETERS:
p_bukrs TYPE bukrs.
SELECT-OPTIONS:
s_date FOR bkpf-budat.
DATA :
l_perio LIKE bkpf-monat,
l_poper TYPE poper,
l_year LIKE bkpf-gjahr,
l_spmon TYPE spmon,
l_periv TYPE periv,
l_date1 TYPE datum,
l_date2 TYPE datum.
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
    companycodeid = p_bukrs
    posting_date = s_date-high
IMPORTING
    fiscal_year   = l_year
    fiscal_period = l_perio.
CONCATENATE l_year l_perio INTO l_spmon.
* Get the next period
IF l_perio < 12.
l_perio = l_perio + 1.
ELSE.
l_perio = '01'.
l_year = l_year + 1.
ENDIF.
MOVE l_perio TO l_poper.
SELECT SINGLE periv INTO l_periv
FROM t001
WHERE bukrs = p_bukrs.
IF sy-subrc = 0.
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
    EXPORTING
      i_gjahr        = l_year
      i_periv        = l_periv
      i_poper        = l_poper
    IMPORTING
      e_date         = l_date1
    EXCEPTIONS
      input_false    = 1
      t009_notfound = 2
      t009b_notfound = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
    EXPORTING
      i_gjahr        = l_year
      i_periv        = l_periv
      i_poper        = l_poper
    IMPORTING
      e_date         = l_date2
    EXCEPTIONS
      input_false    = 1
      t009_notfound = 2
      t009b_notfound = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE: / l_date1, l_date2.
ENDIF.

How to determine Chord and BPM

Similar Messages

Maybe you are looking for