How to determine fixed exchange rate or not on contract SD?

Hi all,
I am looking how we can determine if a contract has got fixed exchange rate or not?
In header data (first tab) we can see currency and exchange rate but I do not see a flag (as in PO) for fixing this one...
Thanks for your help.
David31

Hi,
We can check the and maintain exchange rate by following setting,
IMG->SAP NetWeaver>General Settings->Currencies--->Enter Exchange Rates
There are other setting also under the same currencies tab.
Thanks,
Rasik

Similar Messages

  • How I can fix exchange rate

    Hi all.
    I try to fix exchange rate in a post document ( With FB01 transaction ) filling the BKPF-KURSF field, and the system displays next message:
    Exchange rate of USD fixed for translation from EUR to  0,81853
    The exchange rate 0,81853 is the last filled in TCURR table.
    I want to fix exchange rate amount 0,7887, How I can fix this exchange rate???
    Thanks
    Best regards
    Ismael

    the message number is F5768.
    and the type is not important, it can be changed. The question is if I can fix my exchange rate.
    thanks
    Edited by: Ismael Navarro on Dec 21, 2007 1:54 PM

  • Fixed Exchange Rate in Journal Entry- How to use?

    Hi Expert,
    We need to create a journal entry with different rate VS exchange rate table.
    Is there any way to ovirride the exhange rate during the journal data entry?
    I hv already reads discussion on this topic but i want like following Scenario
    In Exchange rate And indexes i hv define EUR=80 And INR=1
    Now i want following Manual JE
    GL/BP code                   Debit(FC)                Credit(FC)                 Debit                       Credit
    Any Foreign Curr Acc       EUR 10.00                                            750.00
    Any INR Curr ACC                                          EUR 10.00                                             750.00
    I have already make tickmark on Fixed Exchange rate    EUR       75.00  
    but it is not working it shows following JE
    GL/BP code                   Debit(FC)                Credit(FC)                 Debit                       Credit
    Any Foreign Curr Acc       EUR 10.00                                           800.00
    Any INR Curr ACC                                         EUR 10.00                                               800.00
    Plz Replay i m waitting.......my client want result on urgent basis.....
    Regards,
    Sandy

    Hi Sandesh,
    Do you mean after you have added JE, you review it and it is not similar to the JE when you add?
    Toan

  • How to use the fixed exchange rate  1009 (global rollout subsidiaries)?

    Hi Experts,
    I am doing currency conversion.My requirement is i need to take fixed exchange rate type of 1009.
    I am handling 16 different types of currencies that to be converted into US$.
    Can anyone help me out how to use the exchange rate(1009) and do the currency conversion?
    Thanks in advance
    Ganesh

    Hi,
    Look here for currency conversion:
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=currency+conversion&adv=false&sortby=cm_rnd_rankvalue
    Cheers!
    Amit

  • Fixing Exchange rate date for Purchase invoice

    Hello All,
    As per standard SAP the exchange rate in the PO is calculated based on the PO creation date. When the exchange rate is not fixed in the PO, then the exchange rate in the subsequent GR and IR documents is calculated based on the posting dates of these docs.
    Our requiremnt is that Posting date for GR/IR  should always the system date which is possible and but in this case system also takes exchange rate as on system date. *But we want the exchange rate should be taken as on last day of the previous month.*
    If anyone have worked on such a scenario or have any idea on how can this problem be answered please share the some info.
    Points assured.
    Thanks
    Warm regards.

    Hello,
    Thanks for the prompt update.
    We are not abel to fi nd any user Exit to attain this functionality, can you let us know what user exit can be used to achieve this.
    Warm Regards,

  • Revenue at fixed exchange rate and Tax at current exchange rate.

    Hello,
    We have a requirement wherein a foreign currency sales order is negotiated at fixed exchange rate.  At the time of billing while revenue should be booked at negotiated exchange rate, tax(mwst) should be calculated at current exchange rate.
    Is this possible and how ?
    Kindly share your expertise
    Regards
    Unit.

    Hi,
    I think that it should be possible. Since I do not have system in front of me to test, I could not test it. As per the pricing procedure the price of the product gets defaulted. This can be manually modified and key in the revenue figure at a fixed exchange rate. In the case of tax calculation, the system will take the current exchange rate. If possible, pl take the help of SD Consultant.
    Trust this helps,
    Cheers,

  • Fixed Exchange Rate in JE

    Hi All,
    the "Fixed Exchange Rate" option in Journal Entry doesn't work.
    If I check the FER and write an exchange rate, when i write the debit or credit in line JE the system asks me the change of the day and uses this value rather than the value I fixed in FER.
    How can I use this option?
    I think that this option is important for insert JE with different exchange rate from daily exchange rate!!!!
    Thanks
    Simona

    Hi Simona,
    Based on my knowledge, The 'Fixed Exchange Rate' feature in the Journal Entry window has by definition no effect on the amounts in Local, System or Foreign Currency. It is mainly for reporting purposes.
    So in case the exchange rate you chose is already defined in exchange rates window for the day, system will compute currency accordingly, not by the rate you entered. When there is no exchange rate predefined, the exchange rates and indexes window will pop up.
    If you want to use the fixed exchange rate rather than the exchange rate predefined, you have to change it manually.
    To convert currency manually, you will need to have the following setting available.
    Journal entry window -> click 'Form settings' icon -> Document -> Table -> Convert amounts according to rate upon exit: -> Untick the check box 'From LC field', 'From FC field'
    Hope this explains your question.
    Regards, Summer
    SAP Business One Forums Team
    Edited by: Summer Ding on Jul 2, 2008 3:26 AM

  • "An Exchange Rate Does not Exist" error while creating an item

    Hi..
    Pre-requisites: RMS is installed without base data
    We are trying to create an item in RMS by filling the required information in "Item Maintenance window" and "Supplier details" screen. After this is done when we select the "Retail by Zone" link and the application prompts an error message : "An Exchange Rate Does not Exist", and all the values in "Retail by zone" screen are not populated. How do we ressolve this?
    Thanks in Advance
    Yamini

    Also, make sure that if a currency has a rate entry for example, 01-jul-2010, then make sure that ALL other currencies have a rate entry for 01-jul-2010, even if the rate has not changed for other currencies - a little trick I learned from an Oracle consultant.
    Alan

  • How to automate the exchange rates in BI

    Hi Guys
    can any one let me know the step by step approach of how to automate the exchange rates in BI...I know that if we right click in source system and say transfer exchange rates ..we will get those values ....But I want to automate this process in BI with a Process chain...I have created a start variant and connected it to a ABAP process type and calling the RSIMPCURR programm in sync..local....Do I need to call any Program event ? Iam not able automate this..please advice step by stepp
    After ABAP process type do I need to create any other steps ?
    regards

    Hi,
    All you have to do is to define the ABAP Process as new process variant, call mode syncronous, called from local, program name RSIMPCURR, and define a program variant for example number 12 and create it, there you select the update exchange rates., go to attributes, give a meaning and save all. You can automate the start of the porocess chain and select it as period job.
    Regards
    MK

  • Re: exchange rate did not effect for the billing M

    hi experts,
    good morning to all,
    i have a doubt my company code currency is HKD.
    the exchange rate given on 01.01.2011 is 10.26xxx and for 01.2.2011 given as 10.37xxx for HKD to EUR.
    for january the invoices generated correctly by using M, now where as for february the invoices generated did not capture the M rate. when we see the documents it captured 11.35xxx for HKD to EUR i checked in ob08 the ex.rate for M is 10.37xxx.
    so if any body face the same scenerio giveme your inputs awaiting for your golden replies and have a good day to all.
    thanks in advance,
    kumar.b

    Hi,
    I think u maintained 2 exch. rates 10.37 and 11.35 for date 01.02.2011
    So system giving priority to 11.35 because you may be enetered this rate after 10.37
    Also check which exchange rate type is maintained for customer, it might be there is diffrent exchange rate type in customer master in stead of M, and for that exchange rate type the rate is 11.35.
    Determination of exchange rate
    Exchange rate type(in customer master-billing tab) + Valid from date = Exchange rate
    Kindly check thoroughly.
    kapil
    Edited by: Kapildev Farakte on Mar 10, 2011 9:14 AM

  • Fix Exchange Rate Translation

    Hi,
    Legal Requirement
    We have a statuary requirement where one Company Code needs to use the local Fix Exchange Rate that is provided by the local national bank.
    AS-IS Scenario
    The thing is that, for the Company Code Currency, the Exchange Rate Type is defaulted to "M" (in OB22). This one is updated daily by our global bank interface.
    Because of that, we created an new local "Exchange Rate Type" and tried to do an substitution rule.
    The rule did actually worked in the sense the changed the info from the field BKPF-KUTY2 for the Exchange Rate Type that we wanted.
    Problem
    The poblem is that the calculation of the actual amount (field BSEG-DMBTR) continues to be based on ER "M" and not our local one...
    Is there any way to get around this ?
    Best Regards,
    Brno

    Hi,
    Keep 0 % Max.exch.rate dev. for your company code in following path:
    SPRO---> Financial accounting (NEW)  ->Financial accounting global settings>Global Parameter for Company code->Currencies->Maximum Exchange Rate Difference---> Define Maximum Exchange Rate Difference per Company Code
    Also keep 0 % Max.exch.rate dev. for two currencies in above path with Define Maximum Exchange Rate Difference per Foreign Currency
    Regards,
    Biju K

  • Fixed Exchange Rate Posting

    Hi Friends,
    Just a quick one,I am trying to post a journal entry with a fixed exchange rate that is different from the system exchange rate, when I type in the amount, the system still uses the system exchage rate to calculate the value despite the fact that I checked the exchange rate box and filled in different rate.
    Is there something I have to set-up before I can achieve this posting with fixed exchange rate?
    I will really appreciate your usual help.
    Regards

    hi,
    Exchange Rate
    If you created a journal entry with an exchange rate different than the one defined in the Exchange Rate and Indexes table, select this checkbox and type the exchange rate used for that specific journal entry.
    This information is essential when revaluating reports. When setting the parameters for revaluation, and choosing the option to refer to the rates defined in journal entries, SAP Business One performs the revaluation according to the exchange rate you type in this field.
    If you do not select this option, the revaluation results might be inaccurate, since SAP Business One will consider the exchange rate defined in the Exchange Rate and Indexes table, and not the actual rate used in the journal entry.
    Jeyakanthan

  • Why exchange rate is not displayed correctly when I create the PO in SRM?

    Hi Gurus,
    Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
    But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
    Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
    But when the PO is transmitted to R/3, the exchange rate is the correct.
    My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

    Hi Muthu,
    I'm in Extended classic.
    I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
    Two checks of budget exist:
    1.- When creating PO (exchange rate date of delivery date of the SC's item)
    2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
    If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
    Now my question is: It is a standard behavior? (to take different exchange rate)

  • Exchange rate difference not going to the correct GL account

    Hello,
    In the transaction OB09, I have given the GL account 702000 for exchange rate difference realized loss and gain.
    I have also maintained the exchange rates in the transaction OB08.
    In transaction F-44(clear vendor), I give the foreign curreny(EUR) in the entry screen. When I do a charge off difference, however, I need to enter the amount in local currency(USD) because our bank operates in the local currency. When I do a document simulate, it puts the exchange rate difference into another GL account (703030 - that we have defined for unauthorized deductions) and not the one defined for the exchange rate difference(702000). This does not happen if I enter the amount also in the foreign currency.
    Could anyone tell me the reason for this and the correction measures.
    Any helpful suggestion will be greatly appreciated.
    Thanks,
    Rugmani
    Edited by: Rugmani Rajan on Aug 27, 2008 11:35 AM

    Hello,
    The original problem is resolved. The current exchange rate was not getting uploaded to the system and as a result, the old exchange rate was being used. So it was putting the difference into the other account.
    That has given rise to another problem. We use the TBEX to upload exchange rates from a centrally maintained spreadsheet. The upload is giving the following errors:
    Securities master data EUR do not exist!
    Interest rate master data CNY is missing
    Suggestions and correction measures will be greatly appreciated.
    Thanks,
    Rugmani

  • Exchange rate account not defined

    While doing F-04 for a particular bank incoming clearing account, I am getting an error saying : exchange rate account not defined for G/L account and currency INR.
    All the postings in the account are in INR and I have also done settings in OBA1 for KDF.
    Please help
    Thanks

    Why would I need to maintain exchange rate settings if all entries are in local currency?
    One more observation:
    During f-04 clearing, when I toggle between local currency and clearing currency, there is a difference of 25000000.
    Any ideas?
    Thanks

Maybe you are looking for

  • Get selected row values from Table view control

    Hi , I am using transaction ME23N, would like to access row values from item table for selected row. I have written a script as in screen shot and its giving me error at java script step two. I want to get the PR number from item table for selected r

  • Underlying tables for documents stored in content area

    Can someone tell me the underlying Oracle tables/views, etc... in which documents are stored when they are uploaded to a content area? I need this information to write my own customized search routine. Thanks.

  • Htaccess, cannot get to work on mac os x lion server

    I've enabled mod_rewrite.so in httpd.conf I've updated the apache2/httpd.conf to... Code: DocumentRoot "/Library/WebServer/Documents" <Directory />    Options Indexes MultiViews FollowSymLinks    AllowOverride All    Order deny, allow    Deny from al

  • ITunes 8.02 cannot update iPod behind proxy

    I tried to update my iPod Touch today. I was able to start the download at home, but was unable to finish it. Came to the office, where we are behind a proxy server and iTunes gives the error: iTunes could not contact the iPod software update server

  • How to use the activation library on SAP J2EE Engine

    Hi my friends:    This post is referent to a note and their solution, but the solution is not clearly: Symptom: One wants to use the activation library provided together with the j2ee engine from an own library. Reason and Prerequisites: One wants to