How to determine frequency band for one's iMac?

I recently bought a TC and (think I) want to set up two networks. The one network I haver set up presently has an older AEBS (b/g) connected to my modem and an older AX (to extend the network and play iTunes on my sound system). This network connects wirelessly to my two iMacs: a 2.0 GHz G5 and a 2.8 GHz Dual Core.
Someone suggested that I could leave my old network as is and design a new network with TC for backups, utilizing the faster "n" standard of the TC. But when I read through the manual "Designing Airport Networks Using Airport Utility," I see that setting up two networks requires, apparently, knowing whether or not my iMac is a 2.4 GHZ or a 5 GHz client computer? How do we determine this?
Any other info you can provide me on how to setup TC to my wireless network would be appreciated.

So, in the manual Designing Airport Networks, they pair the TC with the "n" capable computer, but in the illustration provided, they have the modem connected to the TC with an Ethernet WAN cable and a LAN ethernet cable connected between the TC and the older AEBS. Is this how it HAS to be configured?
I assume that you are depicting the illustration on page 48. If so, yes this would be the proper configuration for a "Dual Band" network. In this case, you definitely do not want to connect the 802.11g base station wirelessly to the TC, because doing so you would not be able to run the TC's wireless in pure 802.11n.
Could the TC be connected wirelessly in another room to the modem? This is where the 2.8 GHZ iMac is. The modem and the older AEBS are paired presently.
Not to the modem, but to another AirPort. Again, however, if the other AirPort is the older 802.11g version, you will only be able to connect them wirelessly in a Wireless Distribution System (WDS).
Also, I've read a lot about backing up each computer the first time by way of an ethernet cable, i.e., not wirelessly? Does one simply forego configuring the network until those first backups are finished?
Not doubt not an ideal situation, but many have reported that performing the first Time Machine backup to the Time Capsule wirelessly is not quick. Depending on the amount of data being backed up, I heard anywhere from 4 to 24 hours ... or more. As a workaround, most found that performing this first backup while connected directly via an Ethernet cable reducing this time significantly.

Similar Messages

How can I buy apple watch for the space black stainless steel case and the black sport band for one order?

How can I buy apple watch for the space black stainless steel case and the black sport band for one order?

Unfortunately no. I asked the same question when I went to the local Apple Store for my "try on" and as of now you would have to order the watch with the metal link band and the black sports band separately.

How to download pixel bander for photoshop cs5 mac

hi
any one know how to download pixel bander for photoshop cs5 mac please help
Thanks

Hi Eman,
You can download it from : http://www.adobe.com/devnet/pixelbender.html
Regards,
Rave

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

How do i transfer music for one computer to a laptop via home sharing?

how do i transfer music for one computer (desktop) to a laptop via home sharing? the home share is switched on but cant see how to transfer music over
i cant see the little house on the left hand side under where it says genius, 90s music classical music etc, there is also no import or export botton at the bottom of the screen.

Welcome to the Apple Community.
Select the content you want to import from the shared library and click the import button at the bottom of the screen.

How to boldface the header for ONE column

hi,
I want to know how to boldface the header for ONE column. The following will boldface the header for all the columns in the table
table.getTableHeader().setFont(new java.awt.Font("Dialog", 1, 12));
Thanks.
Jrabi

jtable.getColumnModel().getColumn( indexOfBoldColumn ).setHeaderRenderer( TableCellRenderer aRenderer )

How to Upload the Materials for one Plant and then copy the same to all oth

Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>

Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K

How to determine number range for billing document based on company code ..

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...plz help me!!

Hi Amit,
1. Define different Billing Document number ranges in SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
e.g.
NO. From number To Number    Current number Ext
A1   0930000000    0930999999
A2   0940000000    0940999999
A3   0950000000    0950999999
2. Define a Ztable ZNUMB_RANGE as follows
Comp. Code | Tax departure country | Billing Doc Type | Number Range
100                IN                               F2                      A1
200                IN                               F2                      A2
200                US                              F2                     A3
3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
If found pass this number range value to us_range_intern.
us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
Let me know if you are clear.
Thanks,
Mandar

How to stop update notification for one app (iMovie) that I do not want to update

How to stop update notification for one app (iMovie) that I do not want to update. I do not want iMovie 10 taking up nearly 3 gb on my hard disc. iMovie 9 is just fine and only takes up 1.5 gb. But I get notifications to update and don't know how to turn it off. I've gone into the Purchases tab of the App store and deleted it. I don't want to turn off Update notifications (which is irrelevant in any case because I see no option to do that in Notifications system preference pane). I just don't want to be bugged about iMovie updates. The only option I'm given is to postpone the next reminder until the next morning. -- Franklin

Interesting; never came across that - here is the window I get (just double clicked on a random doc in the trash):

How to determine pricing procedure for invoice list

Hi ,
Could you pl let me know "How to determine pricing procedure for invoice list"
All other things are available i.e.
Create Condition Tables
Maintain access sequences
Maintain pricing procedures
Define condition types
Basically how the pricing procedure will be assigned for the Invoice list.
br
pinky

Hi Pinky,
Create a billing doc type by coping std.(ZF1)
Assign invoice list to billing type Zf1
Now maintain a document pricing procedure (for Eg: Z )
Assign this to billing type in pricing control - document pricing procedure.
Now maintain the pricing procedure determination as per the sales area /doc pp/cust pp.
Also in copy control in VTFL maintain pricing type as " B".
REgards,
Krishna O

I have an ipod I want to sell, but I don't know how to determine the specs, which one it is, how much memory, etc. Where can I find this information?

I have an ipod I want to sell, but I don't know how to determine the specs, which one it is, how much memory, etc. Where can I find this information?

See this Apple support document.
http://support.apple.com/kb/ht1353
B-rock

How to determine database growth for new B1 instalation

Hello B1 people,
I'm working on the capacity planning of my new business one project and must know how to determine database growth. Does anyone did something like that before?
Wich tables should I consider?
Thanks in advance.

Hello Gabriel,
I think it is difficult to make any predictions about database growth because this depends on the volume of your business transactions, the number of users, the continuity of your master data...
For example a small number of users can create a lot of transactions (accounting, logistics) with big documents like sales orders with more than 100 items, or a lot of users who primarily look up things but only create small transaction won't create too much data and thus influence database growth in totally different ways.
You should collect information about the volume of daily business to make any forecasts.
If you start with an empty database, the first big growth will be when you upload your master data, but if only few business transactions follow, you shouldn't use that first increase for your calculation.
Is this your very first B1 installation, or do you already have B1 systems running? If you use the EWA service on a running B1 installation on a regular basis, then you will get a good impression of database growth and transaction volume but you should only use this as a basis for your calculation if the business of the new installation is similar to already running company's.
Hope that helps,
Sandra

How to change Group Asset for one Asset

Hi,
Please how can i change a Group Asset for one Asset ?
i try with Tcode AS02 but i find "Act determination" in grey.
i hope ur help
Regards
Edited by: jehade el aoumari on Jan 22, 2008 11:38 AM
Edited by: jehade el aoumari on Jan 22, 2008 12:35 PM

HI,
In the Depreciation tab, double click on the the Depreciation area, where you want to change the Group Asset. because Group asset is specific to the Depreciation area.
You will see the Group Asset field.
If you still do not see the Group Asset field, then you have to change the Screen Layout in the Customisation for the Depreciation area in T-Code AO21.
Hope this helps you.
Thanks
Siva

How to put schedule lines for one year in a schedule line agreement

dear all
thanks for the support till now from the forum
now i need some seetings by which the scheduling agreement will autoumatically take the schedule line for one year automatically
in my client we are getting open PO so
we have to make one agreement acording to that PO and thats for one year
and this one yr will have same quantity to be produced everyday
means 12nos of material every day for 12 month and this will be for every day
and as per that it should generate a sales order.i need to put schedule line automatically not mannually one by one for each date.so wat is the settingand how to reffer this scheduling agreement we can produce sales order.
please help
subrat
Message was edited by:
subrat panda

Dear Subrat,
you cannot create a yearly schedule line in the scheduling agreement. It is not possible due to format restrictions of the date field. But what you can do is the follows (it is the modification, but it should work with the help of user-exits):
1. You can split the year schedule line to the monthly schedule lines. There are two ways to do it. If you apply the DELINS IDOC, then you can do it already during transfer of the data to the application (itr is the best way). Here you can use, for example, user-exit USEREXIT_ZUORDNEN_IDOCS (include LVED4FZZ) or customer function EXIT_SAPLVED4_002, called from the subroutine USEREXIT_DYNPRO (Include LVED4F0U). Alternatively, you can use the user-exit USEREXIT_MOVE_FIELD_TO_VBEP (Include MV45AFZZ) within the call transaction, then it will work also in the dialog case.
2. After getting the monthly schedule lines, you can create a planning delivery schedule, where you can split mothly schedule lines automatically to daily schedule lines according to the customer factory calender.The settings for generation of planning delivery schedules can be found under:
Customizing SPRO: Sales and Distribution => Sales => Sales Documents => Scheduling Agreements with Delivery schedules => Maintain Planning Delivery Sched. Instruct./Splitting Rules
It is the only ways, how you can reach your aim. I hope, this information will help you further.
Kind Regards,
Akmal Vakhidov
Development Support SD, SAP, Walldorf/Germany

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

How to determine frequency band for one's iMac?

Similar Messages

Maybe you are looking for