How to determine if printer has A4 size paper

Is there any way to determine whether the default printer is configured for A4 or NA_Letter size paper?

Have you tried a ruler??

Similar Messages

  • Printing on legal size paper

    I have an hp psc1210 and I can print on legal size paper from my desktop, but when I am on my laptop that is on the network, I can't print on legal size paper.  If I am using word perfect, the software automatically adjusts the bottom margin to 3.48" so that only what is visable on a letter size page is printed and in word it cuts off any characters below the letter size area.  Any suggestions for solving this problem?

    hi there,
    It seems that you have a software incompatibility between your word perfect and the psc,pls. try these steps:
    add a universal driver on your computer
    =open printers and faxes or printers
    =click add a printer
    =select add a local printer
    =if your printer is connected via usb cable on your desktop, pls select on use existing ports and choose usb virtual port xxx
    =if your desktop is connected via ethernet cable,pls.select create a new port and choose standard tcp/ip port and click next
    (for network connection only: if it will ask to enter your ip address pls. print the ip address from your printer and enter it on the computer) and click next
    =if it will ask for the manufacturer, pls. select hp on the left
    =on the right side find hp deskjet 990c and click next
    =use existing driver
    =set as default printer
    =you can rename the printer to psc 1210
    =try printing again
    if the issue still not resolved,uninstall and reinstall the printer software
    pls. reply for further assistance

  • MY printer officejet7​000 DOES NOT PRINT FULL A3 SIZE PAPER LIKE my prin cut for botam

    MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER my print cut for botam & top side, Same printout give in my old model printer like k7108  this printer printour full printing, but I newly purchase printer not printour full a3 size print

    Those '''user_pref("print.printer_Artisan_837 ....''' preferences are what needs to be deleted, with Firefox closed.
    I think that "ding-dong" error sound might be due to an old print job stuck in the print cache, though. Open the Windows Control Panel > Printers and Faxes and check the '''Status''' for that printer.

  • How to Determine If Printer is Offline from Terminal?

    My printer is connected via USB, but the device it powered off. In System Preferences -> Printers & Scanners, the printer has a red dot with "Offline" as its status.
    How can I obtain a printer's "online/offline" status from Terminal?
    lpstat -s reports:
    system default destination: Canon_iP4200_2
    device for Canon_iP4200_2: usb://Canon/iP4200?serial=306DD0
    lpstat -p reports:
    printer Canon_iP4200_2 is idle.  enabled since Thu Nov  7 09:36:45 2013
    So the printer is idle, but it is also "offline". How do I see the "offline" part in Terminal?

    Hi Larry
    You can use this command to list the status in terminal
    lpstat -p
    You will get a list of all the printers and for an offline one like this it will be on the next line from the current job status
    printer Samsung_ML_1510_700 now printing Samsung_ML_1510_700-131.  enabled since Wed 18 Dec 15:41:11 2013
              The printer is offline.
    For normal ones you get this
    printer Peninsula_Port_2_Datamax is idle.
    And for disabled ones this
    printer I4208 disabled since Thu 27 Jun 16:56:31 2013
    Regards
    Guy
    www.peninsula-group.com

  • JSF: How to determine which element has the focus?

    Hi all,
    I have a JSP with some input fields and a text area. When I press "ENTER" the data I have entered should be saved. That works fine (I use JavaScript to catch the keyPressed-event). But when I want to insert a new line in the text area, I press ENTER too and this invokes the javascript function. So it�s not possible to insert a new line in the text area. And I don`t want to save the data when I�m just inserting a new line.
    is it possible to determine which element has the focus at the moment of pressing ENTER? if it`s the text area then I won�t save the data and inserting a new line is possible? Or how to say: "Insert an new line if the user presses SHIFT+ENTER" or something like that?
    I�m using JSC for my application and this is my JS-function:
    function checkIt(evt)      
    var charCode = (evt.charCode) ? evt.charCode : ((evt.which) ? evt.which : evt.keyCode);
         if (charCode == 13)
              document.getElementById('form1:bt_Save').click();
              return false;
              return true;
    I�m looking for something like that:
    if(charCode == 13) {
    if(document.getElementById('form1:textArea').hasFocus())
    doNothing...
    else {
    document.getElementById('form1:bt_Save').click();
         return false;
    thanks for any help

    Hi,
    I searched through many forums (js of course too) but
    I couldn�t find a solution. Everybody knows how to
    set the focus but not how to get it. We often use
    JSF/JSP with javascript and maybe somebody here has
    another approach to this problem (how to solve it
    using jsf itself or anything else)?Take easy. I just suggested to search in a JavaScript forum , in your question you didn't mentioned this. Good luck man.
    Cya.

  • How to determine which application has focus in Windows

    Hello all-
    I'm trying to work around the "Labview freezes when there is large data on the clipboard known issue" (http://forums.ni.com/t5/LabVIEW/Labview-freeze-when-accessing-a-custom-menu-with-data-on-the/m-p/200...) and one thought is to try to determine if Labview has focus, and if it does then clear the clipboard.  If Labview doesn't have focus, then let the user use the clipboard.  This would be a good work-around because it would let the users paste screen shots and such into notes files and wouldn't risk a nasty clipboard/ menu/ freeze-crash.
    My initial search for determining windows application focus, came up empty though.  This old thread (from 2005) pretty much covers it:
    http://forums.ni.com/t5/LabVIEW/Is-there-a-simple-way-to-programatically-tell-which-VI-window/m-p/20...
    The "Is Frontmost' property does not do it.  I need to determine if Labview has focus, as opposed to Windows, notepad, firefox, etc.  I also reviewed the commad prompt commands and didn't find anything immediately helpful there either.
    Any ideas?
    Thanks,
    Casey
    Solved!
    Go to Solution.

    Christian-
    That's perfect!  By using GetForegroundWindow, GetWindowTextA and GetWindowFileNameA in user32.dll I can detect which window has focus.  If Labview has focus then I programatically clear the clipboard so the user can still use it when not clicking on Labview windowns, but also we do not risk a freeze and crash because of the clipboard/ freeze bug.
    I briefly thought about using the .NET versions of these functions, but because that would have forced an upgrade to at least .NET framework 3.0 for all of my user computers, I decided on the unmanaged user32.dll.
    Thanks for the suggestion.  I think I'm pretty close to a work around here that should last me until they fix the clipboard/ freeze bug.
    Thanks,
    Casey

  • Printing on Custom size paper

    I just purchased a HP Photosmart 7515 and I am trying to print on a paper 5 x 6.5 inches. I am doing this document in Word and I have the page set up in word correctly, but when I go to print the printer acts as if I have paper that is letter size (8.5 x 11in). When I go into the printer's properties and try to choose the paper size I get a drop down menu of several sizes, but not an option to do a custom size. Is it even possible to print on a custom sized paper or do I need to return the printer? If you know how to do it please let me know. Thank you.

    Hi,
    I afraid the printer does not support using a custom paper sizes.
    An alternative driver as the C310 is likely to fail as a such is not supported by the firmware.
    You may find the printer specification below, as you may see any custom media size paper is not listed as supported within the Paper-handling specifications, I afraid a such is not supported for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03312222&tmp_track_link=ot_faqs/top_issues/en_u​...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Officejet Pro 8500A - unable to print on odd-size paper

    After a couple of hours of frustration, I have decided that I an unable to print on odd-sized paper on our brand new HP printer!  On an older string in this user forum, one suggestion was to make a paper cut-out from regular sized paper to put on top of an envelope to "fool" the printer into thinking it was using standard sized paper.  I am trying to print odd-sized wedding invitations, and in order to to do this, I wouldn't be able to use the paper guides intended to keep the smaller paper in the middle.
    Another suggestion would be to create a "custom size" paper in the printer properties, which doesn't seem to be possible in Windows XP as far as I can see. 
    My card-stock paper measures 4 3/4" x 6 7/8"  Neither 5 x 7" nor 4 x 6" will work and I have tried numerous others, such as Janpanese postcard, Index card 4 x 6, etc. 
    Any suggestions?  This is frustrating enough to look at other namebrand printers next time, but I guess I'm stuck with this one for a while!

    Hello @drlogan0, 
    Welcome to the HP forums.
    I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
    I would like to help.
    i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
    Basically the steps are, go into the network menu, and select restore network defaults.
    If you have tried restoring the network defaults already, please review the following troubleshooting documents.
    Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
    Printer Does Not Maintain Wireless Connection
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • How to test java printing program without wasting paper?

    Hi,
    I had written a java program that prints my document. I want to know how people test their printing document generatation program?
    Because I think people don;t wastes papers..
    So can anyone tell me to test these programs efficiently and preciesly what are the best testing tools available ?
    Thank you.

    1) find a program that prints to pdf, or some other file
    2) print to pdf or some other file instead of printing to a printer.
    3) To test it perfectly you will eventually have to waste some paper.

  • How to determine binary file data set size

    Hi all
    I am writing specific sets of array data to a binary file, appending each time so the file grows by one data set for each write operation.  I use the set file position function to make sure that I am at the end of the file each time.
    When I read the file, I want to read only the last 25 (or some number) data sets.  To do this, I figured on using the set file position function to place the file position to where it was 25 data sets from the end.  Easy math, right ?  Apparently not.
    Well, as I have been collecting file size data as I have started the initial tet run, I am finding the the file size (using file size command and getting number of bytes as a result) that the size is not growing the same amount every time.  My size and format of my data being written is identical each time, an array of four double precision numbers.
    The increments I get are as follows, after first write - 44 bytes, after 2nd - 52 bytes, 3rd - 52 bytes, 4th 44 bytes, 5th - 52 bytes, 6th - 52 bytes, 7th - 44 bytes and it appears to maintain this pattern going forward.
    Why would each write operation not be identical in size of bytes.  This means that my basic math for determining the correct file poistion to read only the last 25 data sets will not be simple and if somewhere along the line after I have accumulated hundreds or thousands of data sets, what if the pattern changes.
    Any help on why this is occuring or on a method of working around the problem would be much appreciated.
    Thanks
    Doug
    Doug
    "My only wish is that I am capable of learning each and every day until my last breath."
    Solved!
    Go to Solution.

    I have stripped out the DSC module functions from the vi and attached it here.  I also set default values to all the inputs so it will run with no other inputs.  I also included my current data files (zipped as I have four of them) though the file names are hard coded in the vi so they can be changed to whatever works locally. In fact probably will have to be to modified for the path anyway.
    If you point to a path that has no file, it will create a new one on the first run and the file size will show zero since there is no data in it. It will start to show the changes on each subsequent run.
    As I am creating and appending four different files, each with it's own set of data but always the same format (array of four double precision numbers) and the file size information always increments the same for all four files (as will be seen in the File Size Array) I don't think it is a function of the size of the acutal numbers but something idiosyncracy with how the binary file is created.
    If this proves to be a major hurdle I guess I could try a TDM file but I already got everything else working with this one and need to move on to other tasks.
    Thanks for any continued assistance
    Doug
    Doug
    "My only wish is that I am capable of learning each and every day until my last breath."
    Attachments:
    !_Data_Analysis_Simple.vi ‏40 KB
    SPC.zip ‏2 KB

  • I have a MacBook Air and for what ever reason, the print settings have gone out of whack. I am not sure how to set to print a normal A4 paper size or a standard envelope. These settings were working O.K., but not now

    I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • How to determine which user has an Access 2013 databse open

    How can I tell which user / PC has opened a Backend Access database?

    If the file is stored on a server and you have access to it, you could check in Computer Management, then go into System Tools, Shared Folders, Open Files, and you should find the file listed there along with which user has it open currently.

  • How to determine realdy printed for SAP script?

    Dear all:
            When the data real printed through the printer(SAP script), then I how to knew it's printed?
            Because I need to control data printed or not. Please help.
            Thanks a lot!!

    Hi,
    You can check the NAST table entry with the document number.
    If already printed then there will be an entry.
    Regards,
    Ram

  • First boot of local zone - how to determine when sysidtool has finished

    Hello,
    we use a /etc/sysidcfg in order to do the solaris base configuration automatically. After the first boot of a local zone I recognized that some tools are started by solaris (sysidtool, etc.) which apply the settings mentioned in /etc/sysconfig.
    Since we want to script some post-install set-ups I need to know, when the first boot including all "first-boot-scripts" has completely finished. Is it possible to query this information, maybe by calliing a special tool or by looking up some string within an logfile?
    I would be grateful for any hints,
    Thomas

    I haven't checked, but I assume they have normal dependencies in the SMF tree so that other services don't start until they complete.
    I would probably look at the milestone/multi-user-server service and see if it's online yet. If it is, they're probably done.
    Darren

  • How to determin wich control has focus

    I'm using arrow keys to drive an external device. I catch the main vi key events and act on it. On this vi is also a textinput. When I navigate true is input with arrow keys the main vi events are also fired. That of course should not happen. Is there a way to distinguis between such events. Thus between a vi's main keyboard events and keyboard events in a control on this vi. I thought of finding out wich control has focus.?

    Sometimes when you dialog controls, the last "OK" button added to the front panel has the focus turned on by default. You can right click on the control and select "Customize >> Key Navigation" and select "None" in the list.
    It seems you have a different problem and are using event structure. Nomally we use the "Value Change" as event condition. Is it possible that you may choose a different condition, such as "Key Down, Key up, etc"?
    -Joe

Maybe you are looking for