How to determine receivers in the send step in BPM?

Hi Guys,
I have 3 send steps in BPM defined with send context and for each send step i have defined a receiver determination in ID. Each Receiver Determination has a condition based on which identifies multiple receivers.
The BPM is failing and unable to determine the conditional routing. Do i need to add the receiver determination step before each send step so that it identifies the receivers.
Any help would be appreciated.
Thanks,
Raj

Hi Guys,
Thanks for all of you for the quick replies and it is really a great help.
We have resolved the issue. The approach is as below.
we have a generic design used by multiple customers. For the interface where we have the BPM, we are doing conditional routing for each customer before they hit the BPM that is as soon as we receive the Asynchronus request based on the condition we direct the message to a particular BPM. Basically every customer will have different BPM process. ie we create the same BPM with different names specific to each customer and in this way we dont complicate the BPM process and we will know if any particular customer has problems with his process.
Please let me know comments or suggestions on the above approach
Thanks,
Raj

Similar Messages

How to handle error in Syncrounous Send step in BPM.

Hi All,
i am inserting the data into target database and getting the response from the target database in to XI(BPM) here i am sending the data as a bunch(packets), i mean i am splitting the recods into packets and inserting these packets into target database through Sync Send step... now my problem is how can i handle if any of the packet(one set of bunch recors) was fail, how can i handle this exception.
Thanks in advances for your suggesions and solutions which came by your huge experiences.
B'rgrds,
Srinivas

Since the requirement is to catch the Exception proceed as:
Include a Block in your BPM --> Include the Send Step -> Right-click on the Block and choose insert Exception Branch> In the Exception Branch inlcude the logic that you want to implement in case of error.
Possible Exception Handling logics:
1) Send email to support personnel notifying him of the error and let the remaining process continue
2) Send email to support personnel notifying him of the error and cancel the process
3) Cancel the process.
Make sure that you create a Exception Handler to be included in the Block and also in the System Error section of the Send Step.
Regards,
Abhishek.

How to determine or verify the language used if your application is in mult

hi,
How to determine or verify the language used if your application is in multi Language Env.
Thanks & Regards

Hi again;
I suggest also see below link which we discussed before here
Find languages installed in my R12 instance ?
Regard
Helios

How do i get passed the billing step when using my apple id to download apps

how do i get passed the billing step when using my apple id to download apps on my ipod touch

DId you enter a valid payment method?

I want to be a good SAP user but please help me how and can i do the right step about SAP

i want to be a good SAP user but please help me how and can i do the right step about SAP

Hi,
you can start learning SAP from an end-user/key-user perspective with the online learning portal of SAP Learning Hub, business user edition.
Further information can be found here:
SAP Learning Hub
Regards,
Arnold

Regarding send step in bpm--"send context"

i want to use the send step in my bpm with send context.
The send context is a freely definable string, which you specify in the send step. You query the send context in a condition in the receiver determination in the Integration Directory. You must specify the send context to be able to send messages from the same message interfaces to different receivers in different send steps.
but i did n't understand regarding the explanation given above.
could u plz help me out

Hi
When you use Receiver determination step in BPM to get a list of receivers for a send step.
You need to define send context to send messages from the same interface to different receivers in different send steps. As list of receivers is collected using receiver determination.
Now you can use this to set condition(send context) based receiver in ID Receiver determination.
Thanks
Gaurav

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

Send step in BPM is "logical deleted"

Hi everybody,
we are sending IDOCs from BPM to receiver determination (R/3 Backend).
The BPM protocol marks the send step as "logically deleted".
In SXMB_MONI strange!
Sender = Receiver = BPM
Any ideas?
Regards Mario

The required number in the fork was wrong!

Sync Send step in BPM.

hi all,
My BPM flow starts with a single message that I split using a message map into a list of messages into a block which is foreach mode to be sent synchronously one by one splitted messages to an Oracle stored procedure via the JDBC adapter. After the mapping step, the flow goes into a ParForEach block that executes the sync Send step to the JDBC adapter, and then has a Container Action that collects the responses.
My problem is that BPM seems to not like executing a synchronous send from inside a block. The first execution of the send step will produce an error in the BPM flow.
thanks in advance.
srinivas.
Edited by: sri_rambo on Nov 27, 2009 8:06 AM

My problem is that BPM seems to not like executing a synchronous send from inside a block.
BPM does support SYNCSend step inside a Block....but not for ForEach/ ParForEach mode of execution.
I think you are following this procedure from quite a long time.....sync send inside a foreach block.
Regards,
Abhishek.

Transport Acknowledgement in an Ansynchronous Send Step in BPM

I tried this scenario /people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments for a file acknowledgement in an ansynchronous send step in BPM and it worked fine.
This made me think of something else...
This SAP help site http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm
says - for a "Permanent negative acknowledgment" the "Send step triggers system error for which you can define a specific exception handling."
I understood this as saying "If the tartget file is not placed, a system error is thrown for which we can write our own exception handling"
In the scenario explained in the blog the 'deadline branch' was made to wait for a few miutes and once exceeded, made to throw an exception "NegAck" which is handled in the "Exception handler branch"
So what i tried was, I removed the 'deadline branch' and retained only the 'exception handler branch' and made the 'send step' to throw a system error "NegAck" so that if the "Send Step" recieves a negative acknowledgement, it would throw this error "NegAck" which I have handled in the "Exception Handler Branch"
However, this did not work. Can anyone kindly explain where was my mistake?

Dear Bharath,
hmmm nice question...
The answer to this is....whenever you configure a async send step with "transport ack" it will never go into error..
the send step will either get a positive ack(if the file reaches correctly) or a negative ack(if there is some problem like password expires) but it will will never go into error and hence directly the control will never go to exception handler block...
consider the cases :
1. Async send step with transport ack and file reaches correctly : +ve ack is generated and BPM will stop
2. Async send step with transport ack and passowrd expires : the send step will not go in error but you will get error in adapter engine(RWB) so it will keep on restarting and corresponding negative ack will keep on getting generated but here also the send step has not gone to error but the message in AE has gone into error and hence control will not pass directly to exception handler block....what you can do is keep a timelimit thru deadline branch so that after that much time control goes to exception branch...
This should solve your problem...
do not forget to close the thread marking useful answers after your query is resolved
Edited by: Tarang Shah on Mar 30, 2009 4:10 PM

Controlling a send step in BPM

Hi I have a BPM like in which the last step will be
block starts( (syn)RFC -> container->) block ends ->transformation-> send and i need to send the message in the last send step..based upon on field in the RFC response, i used a switch step after the block and in the branch i hav transform and step and in the branch otherwise i have the control step, but it seems ,it is not checking the condition, it alwys goes to the send step.
and i am not able to see the switch step in the graphical work flow..any ideas?
thanks

Some basic checks that need to be done on the BPM:
1) return code should be 0 in SXI_CACHE
2) In SXI_CACHE there is an option to see the XML of your BPM.....this indicates what all steps are present in the BPM.....open this XML and check if each and every step is mentioned there.
3) Check if there is any errored instance of the BPM in tcode SWWL...if yes then delete this instance
4) I hope that your condition in Switch block is defined properly.
5) Delete all the objects from ID (related to this interface)....then reimport the BPM from IR and again create the objects....last option
Regards,
Abhishek.

** Is it possible to call the backward steps in BPM?

Hi friends,
Is it possible to call the backward steps in BPM from the current step ? Like 'Throw Alert' in BPM whenever we restart the BPM.
Kindly reply.
Kind Regards,
Jeg P.

Hi friends,
Is it possible to call the backward steps in BPM from the current step ? Like 'Throw Alert' in BPM whenever we restart the BPM.
Kindly reply.
Kind Regards,
Jeg P.

Receiver Determination with Synchrnous Send step in BPM

Hi,
Is there any way to use BPM Receiver Determination step type with Synchronous send step ?
Is it possible to send a request to multiple receivers synchronously and capture the response?
Appreciate for your response.
Thanks,
Rao.Mallikarjuna

Use malticasting, check out these blogs
Multicasting using Receiver Determination Step in BPM
and pattern number 6 in BPM with Patterns explained Part-2
Thanks!

How to read fields from response message in send step in BPM

Hi ,
I have one BPM scenario where I am using synchronous send step to insert data into database and to get response back from database as success or failure .My scenario involves inserting data into multiple tables and in multiple rows . If all the inserts are successful then I want to write success message else I want the messaage as error . So can we read all the SQL response and store it in container varibale and the have soem decision logic ?

Hi,
for everyinsertion, you will get a response
<INSERT_COUNT> </INSERT_COUNT>
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
if the value ==1 , then insertions is sucessful, if value ==0, then insertion not succsful.
So, in your mapping, just check if any of the values is 0 and if yes, then decide if you have to write a sucess message or a failure message.
Regards,
Bhavesh
Regards,
bhavesh

How do u find out the full stepping build of a cpu

using everest i get CPU Stepping A2 CPUID Revision 000006A0h
sandra gives me generation G7,revision stepping A/0(0) stepping mask A2
CPU-Z stepping 0 i would like to know how to find out the full stepping build inthe format eg. dkv4d Aqea 0324

The BTO/CTO configuration and serial numbers will be listed on the invoice. The configuration will not be apperant on the packaging nor do the serials code configuration other than being linked to the original invoice and its descriptions.
Serials code only production plant, model family, production week, and unit number of that week.
The mac pro has only one model number that corresponds to the bsae system. Any other config is a BTO/CTO that is additions or subtractions from the base config.
The closest you will get is the as shipped config sticker on the machine itself.

How to determine receivers in the send step in BPM?

Similar Messages

Maybe you are looking for