How to determine shipping company from trackcode format?

Hi Folks,
I'm working on a CFM project that needs to determine which
shipper a trackcode is associated with. My app gets a trackcode,
but nothing else. I could try to find it by querying all of the
shipper databases (slow, painful), but it would be easier if there
was just a format difference (like length, number/alpha, etc).
Does anyone know of a simple way to tell them apart?
Thanks!

Hi loonloon,
Based on your description, your case related to ios / android app. Both of them are third-patry mobile product. I am afraid this is out of our support. Thanks for your understanding and effort.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to determine client locale from the mail?

How to determine client locale(language/country) from the mail(header)?
I investigate that some mails have not got any content-language header...
Also, If mail is in multipart , I cannot get it throught the contentType....
e.g some header contain header like this: content-Type: "text/html; charset=Big5"
but some are : content-Type: multipart/mixed; boundary......";
So, how can I know the client locale?
Thanks

You should be able to get the charset from the content type, as u said. the reason some types don't have a charset, such as multipart/* types, is because they don't contain any content on their own! they only contain nested body parts, each of which should have a charset specified. you're gonna have to get the charset by following the mail structure recursively.

How to determine Oracle_Home default from multiple home installation?

Does anyone know how to determine the current Oracle Home default in the registry when multiple Oracle Home exists?
Both 8i and multiple 9i Version X's exist on a client machine. We need to determine the current default oracle home to determine path for various drivers.
In analyzing the Oracle Home registry keys I have been unable to find a means for identifying the current Oracle Home default.

Thank you for you reply, your advice is good. Unfortunately our application has to deal with all kinds of Oracle configurations and one of those is the multi-home issue. We have looked throughout the registry particular in the HKLM\SOFTWARE\ORACLE|ALL_HOMES\
but have not found any entry that would indicate a default home. One two different system installation of multiple client installations there is no DEFAULT_HOME. We do have the HOME0, HOME1, ... HOME4 but, these are just sequencial based on when they where installed not on the order of preference or any default setting. Problem is our application needs to know the default home to locate the appropriate drives to use and appropriate connects service to look-up(tnsname) also.
Thanks.

How to determine sales org from ship-to-party in a transaction?

Dear all, I have a situation.
I had a requirement of determining
1. sold-to-party
2. sales organization
when a ship-to-party is entered into a transaction type.
Considering that the sold-to-party and ship-to-party are different BPs.

Hi Animesh,
This process is known as reverse determination. and reversal of the search direction for partner determination uses business partner relationships using the field Reverse Determination within the access sequence customizing setting. Path is IMG>CRM>Basic functions--> Partner Processing
You create a access sequence for partner determination which should have only a single step.
This setting is only relevant when you enter either Business Partner Relationships or BP Relationships by Sales Organization as the source for this single access.
During partner determination using business partner relationships, the system normally looks in a partner's master data for the "Has the ..." relationship, such as "Has the ship-to party". Marking this field sets the system to look for the same relationship, but in the reverse direction, such as "Is the ship-to party".
Leave the field Reverse Determination unmarked to set the system to function as usual.
Mark the field to set it to read relationships in reverse for this single access.
You make the following settings for the access sequence with one single access:
Source: Business Partner Relationships
Details on the source: Ship-to Party
Reverse source (this field): marked
You assign this single access to the partner function Sold-to Party.
For the Ship-to Party, you can have either of the following settings :
1) If the document does not have a preceding document then do not assign any access sequence to the Ship-to-Party partner function or
2) If the document have a preceding document which will pass on the Ship-to Party details to the current one , then you can assign standard Access Sequence 1000 or your own copy of the standard access sequence number 1000.
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

How to determine if coming from the Error Page?

Version 4.1.1.00.23
Hello,
I have a manually created tabbed form with a collection.
I've added a validation and set the error message to display on the Error Page to preserve the information entered into the form.
One of the Select Lists is a cascading list. That list does not populate when returning from the Error Page. The parent list is populated and does show the value selected before the error was thrown. It's just the list that is based on the parent that isn't populated.
If I refresh the page the Select Lists are reset and I can access the values normally.
So, what I think I want to do (and I'm not sure here) is to refresh the page when returning from the Error Page.
How can I determine if I'm coming back from the Error Page?
Is there a better solution?
Please let me know if this isn't clear or there are questions.
Thanks,
Joe

Hello,
I'm hoping someone can help me with this.
Thanks,
Joe

How do I stop Thunderbird from Re-Formatting my forwarded email?

Every time I try to forward and html-formatted email to another recipient, the html-formatted email is changed to courier font , all formatting is removed, the text appears bunched up on the left side of the text field, each line occupying only 1/3 of the normal horizontal email line available in the body area and any images attached to the original email are omitted in the forwarded version. How can I preserve the original email's formatting when forwarding that email to another recipient? It's really frustrating.
I have already selected to send emails in html format in the options menu when composing email. There is no similar choice to format (i.e. preserve the native format of) email that I choose to forwarded to another recipient.
Presently the only way to forward readable email is to copy the original email sent to me and paste in a newly composed email, where is remains properly formatted, then reattach attachments from the original email to the new composition. Really tedious.
Thanks in advance for any help with this.
ChickNew

Please Confirm you are using all these settings;
'Tools' > 'Account Settings' > 'Composition & Addressing' for mail account
Select 'Compose Messages in HTML format'
Click on 'Global Composing Preferences' button
Options window opens on 'Composition' > 'General' tab
select; 'forward messages 'Inline'
click on 'Send Options' button
select 'Send the message in both plain text and HTML'
click on OK
Click on OK to close Options window.
Click on OK to save and close Account Settings window.

How do I delete files from HFS+-formatted network drive

Relevant system components:
Very recent iterations of a MBA and MBP both running 10.7.4
Cisco Linksys e4200v1 wireless router, FWver1.0.04
Seagate 1.5 Tb FA GoFlex external drive
Full-size, single partition reformated by DiskUtility to HFS+ (Mac extended volume, Journaled)
Connected by USB to storage port on e4200
Storage set to share at root with either Anon r&w access or admin level user acct.
Demonstrated read and write access
I have set up an external drive as above. The drive is to be used to archive large amounts of uncommonly used data (not a backup) and then is backed up to crashplan+ off-site.
The drive came formatted as FAT32 (I believe.) As we still have one PC and all individual files are smaller than 4Gb, I set up the archive drive as formated out of the box.
Data was written to the drive without issue, backed upi off-site with no issue and accessed a couple times.
The issue came when recently upgraded some itunes albums. These albums had been previously removed from the library and from the computer and stored in the archive drive. These albums were upgraded and redownloaded from apple generating a copy of the album data, but in a superior format (no-drm, greater sampling rate.) This made the archived files obsolete and generated a risk of mixing versions. I decided to delete the obsolete files from archive.
When I attempted to do this by selecting, right-clicking and chosing "move to trash" I was prompted that this was not a "undo-able" action, suggesting that while I was selecting "move to trash," the action would not generate a copy in the trash. Next I was prompted to enter my user and PW. The only user and PW combo that would not cause the dialog to "shake it's head" at me, was my computer user-specific password. The network or drive associated user and PW combos would not take. When I entered my computer user and PW, it was accepted, but a dialog labeled "Trash" popped up with small font, reading "The operation can't be completed because you don't have permission to access some of the items."
Trying to delete only a random selection of one or two files would not work.
I checked the drive permissions and was only able to see "You have custom access." This is not modifiable. I attempted to alter my access permissions from the router, but made no headway. Again, I could read and write, as the router setup suggests, but not "modify," to use a windows term.
Assuming, with little data, that the FAT32 was perhaps at issue I unmounted the network drive, connected it by USB and reformated as above. After formating, I tried the same procedure with no change in outcome.
I am nearly 100% sure that when the drive was connected by usb, I could delete to my heart's content, but not when it is connected via network.
I will note that the drive is accessed by first connecting to the router, which the mac sees as a "PC." This access can be controlled, but can be set to anon.
When I connect I see two identically named folders. One is a sharepoint folder and one is a volume. They access the same data. Deleting thorugh either route has identical outcomes.
As I am a complete newb to Macs, I am really not sure where I should even begin to look for access. Should I bind my router access to my user acct? Is this even doable? Can I reset permissions to this folder through the terminal? Is this really a Cisco or Seagate issue?
Any knowledgable advice is appretiated. I can do the speculating.

Ugh.
This is not an Apple issue. This is a permission issue associated directly with the router. No settings on the mac need to be touched to solve this issue.
In this specific case, it was required that I enter into the router storage settings (192.168.0.1,) disable all anon access, save settings, log in as admin (or just r&w) PRIOR TO deleting the files, then delete the files.
I was trying to enter login info AFTER trying to delete the files. Obviously, that didn't work.
Anyway. I hope this might help someone.

How to Write a file from hex format to another format

hi I am trying to create a file (IBM AFP-printer format) from the hex file which i have created after reading that IBM afp file. Now i have to do some changes in that hex file data and store it back to the same format.
I have tryed storing it using:
Writer out = new OutputStreamWriter(outputStream,"Cp1252");
but it is taking hex format only.
I have checked encoding of afp file by this code
File inputFile = new File( "C:\\ACode\\new2.afp" ) ;
FileInputStream inputStream = new FileInputStream(inputFile );
InputStreamReader in = new InputStreamReader(inputStream);
System.out.println(in.getEncoding());
it is showing Cp1252 only.
But i am unable to store it back to same format
Thanks

I don't really know what the IBM APF stream format is, but I suspect that your approach is not right. If you really want to read and write raw hex bytes, then do not use readers and writers; instead use pure streams. The reason is that readers and writers are designed to deal with character-oriented data, and will automatically perform translations on input and output.
On the other hand, if you could find the correct encoding/decoding software for the IBM format in question, well then readers/writers would be fine, and you could do all of your "internal" work in unicode.

How to determine which company code a customer is assigned

hi
anybody knows how a customer is connected to a company code
i know its connected to several company codes but i want to know the original company code

Hi
Anjali's question sounds valid. As per my understanding we cannot Create a customer many times. The customer will be created only once (say Customer 1000) and the same existing customer will be extended to other company codes and for other sales areas based on the requirement. The company code and the sales area details in which the customer was initially created should be traceable.
But I donot understand the reason for looking for these details.It will give more clarity on the requirement if the reason behind this requirement is also posted by Anjali.
Thanks,
Ravi

How to get ship to from bill to

Hi experts,
I am getting bill to and i need to get ship to on the base of bill to .
from which table i will get it .
thanks in advance.
thanks,
neo

You have to go to KNVP, give the following values to get the corresponding sold-to and then get the ship-to for that sold-to.
VKORG = 'your sales organization'.
VTWEG = 'your distribution channel'.
SPART = 'your division'.
PARVW = 'RE'.
KUNN2 = 'your bill-to'.
You will get the sold-to in the KUNNR field. Then using this KUNNR, go to KNVP again to get the ship-to as follows.
KUNNR = 'KUNNR obtained above'.
VKORG = 'your sales organization'.
VTWEG = 'your distribution channel'.
SPART = 'your division'.
PARVW = 'WE'.
KUNN2 will have the ship-to number. Remember that the same bill-to can be assigned to several sold-to and there can be several ship-to for one sold-to. It is not one to one.

How to determine the month from the week number?

Hi all,
in a routine i have the week number in a year and i need to find the month but i don't know the correct FM to use for this.
Is there anyone that had to face a similar problem?
I'm considering that to determine the month it will be used the first day of the week since there are weeks belonging to 2 different months...
Thank you
Stefano

Hi
If you have a Fiscal Year Variant determined for the week you can use function module PERIOD_DAY_DETERMINE by passing week,fiscal year and fiscal year variant for the week which will return fist and last date.So based on last data you can determine the month.
Regards
Srilaxmi

How to determine a BP from the user

HI Experts,
We have a scenario where there are contract employee's which are not maintained in the system as employee but maintained as BP, now during creation of any transaction i need to determine the contract BP based on the user, in the user master we are maintaining e-mail, the same is also maintained in the BP, which is also unique, is there any ways i can dtermine the BP in the transaction, please somebody help me, this is very crtical in my project.
Regards
Milan

You can always use badi. To use badi, you would have to define in partner access sequence as source COM_PARTNER_Z (Business add-in 3).
Then you would have to create your implementation of that badi (spro>crm>basic functons>partner processing>business add-in for partner). In thet badi implement method DETERMINATION_ADD_IN_3 in which you can put whatever logic you need.
Regards.

Help Please : How to determine transfer function from two signals?

Hello,
I am an intern in a research center and to do my experiment I need to use Labview. I have already managed to make VI for the signal generation and the aquisition data. But now I have to identify the transfer functin from the stimulus signal and the response signal. I would like to display the Bode diagramme and to identify thr transfer function itself.
It is quiet urgent I have to to this by the end f the week.
Sorry for my bad english...
Thank you for any help
Eva comble

The questions in this thread are really regarding System Identification. The only way to do this is using the System Identification Toolkit. LabVIEW by itself cannot do this. Once the model (transfer function, state space, etc..) has been acquired through the use of this tool, more complex design and simulation processes can be done using the Control Design and Simulation Module
Eli S.
National Instruments
Applications Engineer

How to determine from PL/SQL which processes are running

Hi,
I would like to find out which processes are runing. Is there any way how to determine this directly from PL/SQL? I know I can run external C libraries, but if there is another way, that would be great.
Thanks for help, Dan

Rahul India wrote:
YOu might want to check these
http://www.dba-oracle.com/plsql/t_plsql_v$.htm
http://www.dba-oracle.com/t_plsql_monitoring.htm
Please DO NOT post links to commercial websites. It is a breach of the Terms of Use of the forums.
Such websites tend to provide snippits or excerpts of information in order to try and get people to purchase their products (books or whatever) or services.
There are plenty of good resources out there, including the Oracle documentation, other threads on these forums with similar questions and solutions, or expert's blogs or websites that are not trying to sell something.

How to download all songs from my external drive into my itunes library

I have enough Gbytes to not use an external drive for my music.
How do I proceed to download all songs from the external drive on my internal drive?

Hello there, Laetidela.
The following Knowledge Base article offers up some great steps on how to move your iTunes library from an external hard drive to your computer:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
External drive
This option requires more work than Home Sharing, but it creates a backup of your iTunes library on the external drive in addition to moving your content.
Notes before you start:
You can use most iPods as an external drive.
Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Because of this, you can't use a Mac-formatted iPod or external drive to move your music to a Windows PC. See iPod: How to determine iPod's hard disk format if you're not sure how your iPod is formatted.
Mac OS X can read Windows-formatted iPods and drives. This means there are many ways to migrate your information from your old Windows-based PC to your new Mac.
Mac OS X: To be sure external drives appear on your desktop, choose Preferences from the Finder menu. Be sure the options for "External disks" and "Hard disks" are enabled.
Part 1: Locating and consolidating the iTunes Media folder
Part 2: Copy iTunes folder from the old computer:
Part 3: Get iTunes ready on your new computer
Part 4: Back up any music that's already on your new computer
Part 5: Copy music to your new computer
Part 6: Add preexisting music that was on the new computer back into the library
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to determine shipping company from trackcode format?

Similar Messages

Maybe you are looking for