How to determine SLA in Range Gauge Report?

have a following human work flow task scenario for which we need to display SLA performance Index in a range gauge.
1) The dataobject "HumanTaskInfo" will capture task id, task status, task creation time, task completion time in their fields. one more field is been kept to calculate the time difference between task creation time and task completion time during the time of feed to this dataobject
2) Range gauge report design needs a only one field from dataobject to map. but our objective to calculate the percentage of tasks which got completed or rejected status and also their SLA of 8 hrs time period being met.
For example, dataobject "HumanTaskInfo" has 10 records. 5 got completed status and 3 got rejected status and 2 still in "New" Status. out of 8 completed and rejected tasks, only 6 met SLA time of 8 hrs. In this scenario, the range gauge should display 75% as SLA performance ( (6 divide by 8) *100) .
Can anyone help us how to achieve this calculation in Range Gauge Report design configuration?
thanks.

Anyone providing suggestions on this will be highly helpful.
Our requirement is to show the SLA of human task in Range Gauge ( 0 to 65 % - red; 65 - 80 % yellow; 80 - 100% - green) in BAM report.
The dataobject stores
1) Process Instance Id ( which is a unique key)
2) task status ( new, approved, rejected )
3) task start time
4) task end time
5) taskstart2endtime(calculated field which stores the difference between task start time and task end time in seconds)
The objective is to calculate the number of tasks for last 30 days (which has either approved or rejected status) which completed ( means approved or rejected) in 8 hrs of time period .
Assume there are 10 tasks in this data object within last 30 days of period; 4 got approved ; 3 got rejected; 3 still in new status ; out of 7 completed tasks ( sum of approved and rejected ) , 5 met SLA ( within 8 hours of time ).
Now the range gauge has to display 71.42% ( percentage value of 5 divided by 7 ) and the gauge pointer should be with in yellow region ( 65% - 80 %)
We tried to bring 71.42% and unable to succeed in that. In filter tab, we have provided for bringing data for last 30 days.
No clue how to apply the rest of the logic in the range gauge report design.
Any help in achieving this requirement will be highly appreciated.

Similar Messages

How to determine the Support Team from Reported-by?

Hi All,
We need to determine the support team based on reported-by.
I have concluded it is only possible by customization of developing ZBADI from these threads:
Re: How to determine the Support Team from the Reported by?
Automatic determination support team based on own specs?
Re: Route tickets based on Message creaters's location
So we have created ztable which has relation between SAP component, Reported-by and Support Team.
Now i need to develope a ZBADI and assign to the action definition SLFN0001_ADVANCED_FIND_PARTNER(i hope).
Can anyone help me out with the piece of code. Because i don't which FMs to be called for read and update the support desk message.
Note: Action definition SLFN0001_ADVANCED_FIND_PARTNER uses method call Z_CRM_DNO_PARTNER_1(which is a copy of CRM_DNO_PARTNER_1 and applied some correction as per note: 1041455).
Thanks in advance.
Regards
Sanjai

closing this thread.

How to determine the database driver a report uses?

Hello experts. I'm using Crystal Report XI R2 and C# (.net 4.0 runtime).
For a given report, I'd like programmatically determine what database driver(s) a report and it's sub-reports use. The nice thing is that I don't want to change it.
When I refer to database drivers I'm talking about the choices one gets when starting a new report in the Crystal UI. Something like the following:
Access/Excel (DAO)
ADO.NET (XML)
Database Files
ODBC (RDO)
OLE DB (ADO)
I've looked into the developers help file that came with Crystal XI R2, crsdk_net_doc.chm, and can't find any references that would help. Maybe it's what I'm searching on.
My goal is for a given directory produce a list of rpt files that use OLE DB and a MS-SQL Server provider.
Thanks for looking at my question, any assistance is appreciated.
Mike

Also note since you are using 4.0 framework you must also be using VS 2010.
CR for VS 2010 is the only version supported with 4.0 framework.
See this page to download it: http://www.sdn.sap.com/irj/boc/crystalreports-dotnet
Or go back to VS 2008.
Code would look something like this:
     public class frmMain : System.Windows.Forms.Form
        CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
        CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
New subrepoutine...
            ISCDReportClientDocument rcd;
            rcd = rptClientDoc;
            CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo oldConninfo;
            CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo newConnInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
            CrystalDecisions.ReportAppServer.DataDefModel.Table oldTbl;
            CrystalDecisions.ReportAppServer.DataDefModel.CommandTable newTbl = new CommandTable();
            oldTbl = (CrystalDecisions.ReportAppServer.DataDefModel.Table)rcd.Database.Tables[0];
            oldConninfo = oldTbl.ConnectionInfo.Clone(true);
Thank you
Don

How to determine the complexity of OBIEE report?

Hi BI Gurus,
We are currently planning to do OBIEE 11g upgrade. To do impact analysis, we have been asked to come with the complexity of all the reports which are now in OBIEE 10.1.3.4.2. I came up with the following points.
1) No. of tables used in the report - More no. of tables means more joins leading to complexity
2) Usage of Complex joins in physical layer
3) Complex calculations used in BMM layer
4) Usage of pivot tables, charts, guided navigation in the reports
Pls let me know if these are valid criteria to determine complexity. Pls add if anything else can be considered. Thanks in advance!

Hi,
Check data volume as well, as this is also impact your report performance.
If you are looking data model as well, then check table structure whether partioned, indexed etc.
Thanks

How to determine dialog step agent in report

Hi
I have to create a customize report of workflow status Like SWI1. problem is all the data is available in table SWWWIHEAD
but the record of the step which have to execute have empty field WI_Agent . as soon as the agent will execute it . this field will be populated.
I need the agent of that step/ record. In SWI1 out put if we click on the log and then click on the agent button it shows generic decision task and shows the agent below that.

HI
To get the uerid which in waiting state you can use this FM SAP_WAPI_DISPLAY_WORKITEM. Search with SAP_WAPI_* you will get lot of FM which can be used for your requirment.
Regards
Vijay

How to achieve the from and to date range in report builder 3.

I AM TRYING TO CREATE ONE REPORT FROM REPORT BUILDER 3.
WHERE I AM UNABLE TO DEFINE THE DATE RANGE.
HOW TO ACHIEVE THE DATE RANGE IN REPORT BUILDER.
NEED FROM DATE AND TO DATE FILTER IN REPORT BUILDER FOR PK DATE.

Hi Ganesh,
According to your description, you create a report in Report Builder 3.0, and create two parameters FromDate and EndDate, now you want to use the parameters in your MDX query, right?
If in this case, here is a sample query for your reference.
select
{[Measures].[Internet Sales Amount]
} on columns,
{[Date].[Date].members} on rows
from(
select
STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
) on columns
from [Adventure Works]
Reference:STRTOMEMBER
Regards,
Charlie Liao
TechNet Community Support

How to determine number range for billing document based on company code ..

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...plz help me!!

Hi Amit,
1. Define different Billing Document number ranges in SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
e.g.
NO. From number To Number    Current number Ext
A1   0930000000    0930999999
A2   0940000000    0940999999
A3   0950000000    0950999999
2. Define a Ztable ZNUMB_RANGE as follows
Comp. Code | Tax departure country | Billing Doc Type | Number Range
100                IN                               F2                      A1
200                IN                               F2                      A2
200                US                              F2                     A3
3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
If found pass this number range value to us_range_intern.
us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
Let me know if you are clear.
Thanks,
Mandar

How i can Select characteristics range like From To in COPA Report

HI,
I am creating copa report, I want to know how i can select characteristics with range like From / To.
e g i want to give period range from 001 To 002 Etc.
how it is possible while creating COPA report with report painter. (KE31)
Thanks
Nilesh

Hi,
see SAPNET note 516557.
Best regards, Christian

How to determine the number of rows of data in a datatable?

I have a datatable that I fill from an SQL query. I do not know exactly how many rows of data it will return (due to my selection criteria) but will be somewhere between 100 and 300 rows. I send this data into a report but need to determine the length of the report (panel height data member) programatically based on how much data the query has returned. So, I need a way to count how many rows are filled in the data table.
I tried doing a nested "if" statement checking the value of each cell but when I tested the expression at 59 "if" statements (will need 300+) I got a parser error in lookout when I tried to accept the connection. I also tried a type of loop by assigning cursor.2 either to its own value (circular) or to its own value plus one depending on the value of the cell at cursor.2. It was close but overshot by one row or more (much more sometimes).
Any clever ideas? Perhaps I have just been looking at this problem too long. Thanks, in advance, for your help.

Since the datatable gets the data from the SQL query, you can also use the SQL statement to count the number of rows in the query result.
For example, in datatable you do "select localtime, trace1 from intdata where xxx". You can get the count by "select count(trace1) from intdata where xxx". Use the same condition in order to get the same number of rows.
Maybe another SQLExec object is needed to do the count.
Whenever the datatable executes the SQL, the SQLExec executes and return the count.
Ryan Shi
National Instruments

How to determine most recent date from the date column of internal table

Dear friends
would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and time to determine which record is most recently changed...
here the scenario is.
id idnumber chdate chtime
1 123456 20060606 135312
2 123456 20060606 135900
3 123456 20060606 132300
4 123457 20060606 140000
5 123457 20060606 142500
in the above scenario i must keep in my mind that the most recently changed record is identical to its idnumber i can say that:
the record should be fetched this way
id idnumber chdate chtime
3 123456 20060606 132300
5 123457 20060606 142500
because here the id 3 is the most recently changed in the idnumber 123456
where id 5 is the most recently changed in the idnumber 123457
please help me to determin how i am supposed to carry out this task any suggestion, code will be great help of mine.
regards
Naim

After testing my suggestion above, I realized that it doesn't work because the delete adjacent actually will keep the first one and delete the rest. I'm working with Srinivas's code a bit now, I think it is almost what you want. I am under the impression that you dont' want to HIGHest date/time, but just the last record of the sequence, if this is the case, then this code will help. Here we will assign an index to each record per the idnumber, that way we can sort it and get the lastest record.
report zrich_0001.
types: begin of itab_type,
 id type i,
 idnumber type i,
 chdate like sy-datum,
 chtime like sy-uzeit.
types: end of itab_type.
types: begin of itab_type2,
 id type i,
 idnumber type i,
 index type i,
 chdate like sy-datum,
 chtime like sy-uzeit.
types: end of itab_type2.
data: itab type table of itab_type with header line,
 itab2 type table of itab_type2 with header line,
 prev_rec type itab_type.
data: v_id type i.
start-of-selection.
itab-id = 1.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '135312'.
append itab. clear itab.
itab-id = 2.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '135900'.
append itab. clear itab.
itab-id = 3.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '142500'.
append itab. clear itab.
itab-id = 4.
itab-idnumber = 123457.
itab-chdate = '20060606'.
itab-chtime = '140000'.
append itab. clear itab.
itab-id = 5.
itab-idnumber = 123457.
itab-chdate = '20060606'.
itab-chtime = '120000'.
append itab.
clear itab.
 data: counter type i.
* Assign an index to each row per idnumber
loop at itab.
 on change of itab-idnumber.
 if sy-tabix > 1.
 clear counter.
 endif.
 endon.
 clear itab2.
 move-corresponding itab to itab2.
 counter = counter + 1.
 itab2-index = counter.
 append itab2.
endloop.
* Sort it and get rid of older records.
sort itab2 by idnumber ascending
 index descending.
delete adjacent duplicates from itab2 comparing idnumber.
read table itab2 with key idnumber = '123456'.
write:/ itab2-chdate, itab2-chtime.
read table itab2 with key idnumber = '123457'.
write:/ itab2-chdate, itab2-chtime.
Regards,
Rich Heilman

How to determine the Docid

I would like to open a web intelligence detail report I created from within an xcelsius dashboard.
However, I can't use the FS command button or URL buton, because I don't know how to determine what the document id for the webi report is. I've gotton lost wandering around the business objects website. Since our company is new to BOBJ, no one on the project team is quite sure how to do this either.
Can anyone point me in the right direction. I'm not a .net or web services developer. I just create universes, webi reports and dashboards.
Thanks.

I can provide you with this tip:
To obtain the document ID, navigate to the document in InfoView, hover your mouse over the document name hyperlink, and look for the ID number in the browser's status bar. You can also obtain the document ID from the Central Management Console.

How to determine the type of the jobject... similar to instanceof

hi,
I would like to know how to determine the jobject reference of an instance is of which class.
this is something similar to instanceof we use in java.
is there any thing like 'instanceof' in JNI. if there how to use it?
i got this as objective question for which answers were(i do not remember exactly)
1.instanceof
2.assignedto
i could nt het much help in googling.
thanks in advance

Hi
The JNI provides a native version to the java instanceof operator, this function takes two arguments
an object refrence and a class refrence and reports JNI_TRUE.
jclass myclass = env->FindClass("your class name");
if(env->IsInstanceOf(obj,myclass) == JNI_TRUE)
// obj is of type myclass
}Regards
pradish

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
 <htmlb:inputField id= "ENDDA_NEW_IN"
 type= "date"
 doValidate= "TRUE"
 showHelp= "TRUE"
 disabled= "FALSE"
 width= "183"
 style= "cssTextAreadate"
 value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How do I reference items in a report region

I've created a report. You can view the region attributes at http://i3.tinypic.com/wcn59h.jpg.
I've changed the "Display As" attribute of one of the items (QUAN_ID) to 'Select List (query based LOV)'. I've set the "LOV Query" attribute on this item to the following.
select quan.answer_txt
, quan.id
from vug_question_answers quan
, vug_survey_questions suqu
where suqu.id = quan.suqu_id
and suqu.surv_id = :p33_surv_id
--and suqu.id = :suqu_id
order by quan.question_answer_seq_no
The purpose of this LOV is to return QUESTION_ANSWERS that have a foreign key to the SURVEY_QUESTIONS record identified by the sufu_id. The bind-variable ":p33_surv_id" is a page item. I THOUGHT the bind-variable ":suqu_id" (referenced in the commented-out line) would be the name of a column item in my report region. However, the LOV doesn't return correct values if I uncomment the line containing :SUQU_ID.
How do I determine the name of the report region column item so that I can reference it within the LOV of another item in the same region?
Thanks,
-Ken

Ivo,
That's it!
My original tabular form query read as follows.
select rean.id,
rean.resp_id,
suqu.surv_id,
suqu.question_txt,
quan.suqu_id,
rean.quan_id, --this is the column I was adding an LOV to
rean.entered_by,
rean.entered_on,
rean.updated_by,
rean.updated_on
from vug_respondent_answers rean
, vug_question_answers quan
, vug_survey_questions suqu
where rean.resp_id = :p33_resp_id
and quan.id = rean.quan_id
and suqu.id = quan.suqu_id
and suqu.surv_id = :p33_surv_id
I've changed it to the following.
select rean.id,
rean.resp_id,
suqu.surv_id,
suqu.question_txt,
quan.suqu_id,
htmldb_item.select_list_from_query
( 6
, rean.quan_id
, 'select quan.answer_txt, quan.id from vug_question_answers quan, vug_survey_questions suqu where suqu.id = quan.suqu_id and suqu.surv_id = :p33_surv_id and suqu.id = '|| suqu.id ||' order by quan.question_answer_seq_no') quan_id,
rean.entered_by,
rean.entered_on,
rean.updated_by,
rean.updated_on
from vug_respondent_answers rean
, vug_question_answers quan
, vug_survey_questions suqu
where rean.resp_id = :p33_resp_id
and quan.id = rean.quan_id
and suqu.id = quan.suqu_id
and suqu.surv_id = :p33_surv_id
My screen now looks as found at http://i3.tinypic.com/wgq4g9.jpg. (Note that I've also changed the question since a previous post.)

How to determine the u2018equivalent position of the same organizationu2019?

Hi,
"Position change is a transfer from one position to an equivalent position within the same org reporting structure and under the same chief position"
How to determine the u2018equivalent position of the same organizationu2019?
Cheers.

u can identity the position with help of the Holder
say for ex: A is the holder of the Position for Executive now the user performent an event called change of position so he changed to Manager (here we can find the chageing on the basis of some parameter so i have taken holder as Parameter as we dont know which has changed or wht has changed)
in this case we can use the report RHDESC20 se38
not an exact solution for ur question
will try to find some other way

How to determine SLA in Range Gauge Report?

Similar Messages

Maybe you are looking for