How to determine the Benefit Salary based on P0168-BPLAN?

Hi All,
My requirement is calculation of Benefit salary .As per the Functional Spec ,First I have to retrieve info type PA0168
record in effect as of the system date where P0168- BPLAN = one of the STD Plan on ed on the selection screen. Using the system date as the Calculation Date, use the same logic as the I/T168 screen does to determine Benefit Salary.
My Doubt here is how the I/T168 screen determines Benefit Salary?
Please update me with your idea how can I determine the benefit Salary based on the PA0168 record.
Thanks a lot,
Srinivas.

Payload size is not the only factor while determining size of the system (h/w). You need to consider number of services, nature of services (sync/async), payload size, frequency of messages (load), peak load value, security constraints, performance requirements etc..
You may contact your local Oracle Sales Representative/ Oracle Support to get help in determining size of the system. They will provide you a sizing questionarre and on the basis of that they may suggest sizing as well (Oracle has an internal tool for proposing sizing)
Regards,
Anuj

Similar Messages

How to determine the hardware requirements based on the Services' payload

hello,Guys
i am wondering if i can calculate the hardware requirements based on the services' payload ?
what factors should i consider when to determine the hardware requirements?
is there any documents related to my questions? ;)
Thanks
Regards
Wen

Payload size is not the only factor while determining size of the system (h/w). You need to consider number of services, nature of services (sync/async), payload size, frequency of messages (load), peak load value, security constraints, performance requirements etc..
You may contact your local Oracle Sales Representative/ Oracle Support to get help in determining size of the system. They will provide you a sizing questionarre and on the basis of that they may suggest sizing as well (Oracle has an internal tool for proposing sizing)
Regards,
Anuj

How to determine the download media required from my License key?

Hi
After recently rebuilding a dead PC, The user has advised me she used to use Illustrator.
Unfortunately the user does not have the install media available.
Support advised my license key is a volume license for Design Standard.
I have downloaded Design Standard (Universal) but the Licence key is not accepted.
Can anyone advise how to determine the correct download based on my License key?
Many thanks

Some times you may need to sign in to volume licensing account and download
refer
Adobe Licensing Website | Serial numbers | Orders | Accounts

How to find the avg salary of first 3 employees based on each department?

how to find the avg salary of first 3 employees based on each department?

Hi,
Do you mean something like this?
with a as
select
deptno
,sal
,row_number() over ( partition by deptno order by sal desc) rn
from
emp
select
deptno
,round(avg(sal)) avg_sal_of_top_3
from
a
where
rn <= 3
group by
deptno
order by
deptno
DEPTNO AVG_SAL_OF_TOP_3
    10             2917
    20             2992
    30             1983
If not please give more details.
Regards,
Peter

How to determine the purchasing group using BADI BBP_PGRP_FIND

Hello Friends
We use SRM Server 5.5 (Classic scenario).
As you know that, purchasing group has the responsible product categories in PPOMA_BBP, when user creates the shopping cart to determine the purchasing group.
In our case, we should determine the purchasing group using other criteria.
MM side is OK to determine the purchasing group using specific criteria.
Because Material Master has the purch. Group information.
In case of SRM, we should develop the logic using BBP_PGRP_FIND BADI.
But Im not sure how to use this badi.
We want to determine the purchasing group based on the following logic.
If described shopping cart without product ID
Do Standard purchasing group determination logic.
Else
Assign the purch group from MARC- EKGRP (Purchasing Group)
Is it possible to determine above the logic?
If yes, Could you give me some information?
Thank you,
Best regards,
SH
Message was edited by:
So Hee Lee

Thank you for your answer.
I found the way to develop the our logic using BADI: bbp_pgrp_find.
But Im not sure the following logic is correct.
To differentiate described req. or product id req, We check the E_ITEM PRODUCT using BBP_PD_SC_GETDETAIL.
IF E_ITEM PRODUCT is blank, Read the category ID to find the purchasing group.
To find the purch. Group, we can use FM: BBP_OM_DETERMINE_RESP_PGRP.
Import parameter: IS_RESP_ITEM_DATA Category _ID
Export parameter: ES_PURCH_DATA
ELSE
CALL the customer function to read the R/3 purchasing group from MARC- EKGRP
Search the HRT5500-TABNR using purchasing group from R/3.
Search the HRP5500 OBJID using HRT5500-TABNR
Call the FM: BBP_OM_DETERMINE_RESP_PGRP
Import parameter: IS_RESP_ITEM_DATA PROC_GROUP OBJID
Export parameter: ES_PURCH_DATA
Thank you
Best Regards
SH

How to determine the Support Team from Reported-by?

Hi All,
We need to determine the support team based on reported-by.
I have concluded it is only possible by customization of developing ZBADI from these threads:
Re: How to determine the Support Team from the Reported by?
Automatic determination support team based on own specs?
Re: Route tickets based on Message creaters's location
So we have created ztable which has relation between SAP component, Reported-by and Support Team.
Now i need to develope a ZBADI and assign to the action definition SLFN0001_ADVANCED_FIND_PARTNER(i hope).
Can anyone help me out with the piece of code. Because i don't which FMs to be called for read and update the support desk message.
Note: Action definition SLFN0001_ADVANCED_FIND_PARTNER uses method call Z_CRM_DNO_PARTNER_1(which is a copy of CRM_DNO_PARTNER_1 and applied some correction as per note: 1041455).
Thanks in advance.
Regards
Sanjai

closing this thread.

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the field size

I am going to make a multiplatform application that hopefully
will run on linux and windows 2000.If the os is 2000, then I will use
vb.net/aspx else I'll use java servlets. I make the connection
to the web server ( through HTTP) not directly to database server.
So, the resultset will be stored in the String object. The columns
will be separated by delimeter. Our problem is how to determine
the size and type of the fields of mssql,oracle and postgres database
so that we can include it in the String object.
Ex.
String sResultSet=new String();
ResultSet rs=statement.executeQuery(sSQL);
while(rs.next()){
sResultset=sResultSet + rs.getString(field1) + "||" + rs.getString(field2) + "||";
vertical bars acts as delimeter
supposedly this is the code:
sResultset=sResultSet + rs.getString(field1) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||" + rs.getString(field2) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||";
supposedly this is the code if rs.getFieldType() and rs.getFieldSize() methods are existing
Anyone can give me an idea how to get the field type and field size of the database?
thanks in advance

Yes, but I dont know how to do it.
Can you give me an example of using it.
Thanks in advance

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

How to determine the type of the jobject... similar to instanceof

hi,
I would like to know how to determine the jobject reference of an instance is of which class.
this is something similar to instanceof we use in java.
is there any thing like 'instanceof' in JNI. if there how to use it?
i got this as objective question for which answers were(i do not remember exactly)
1.instanceof
2.assignedto
i could nt het much help in googling.
thanks in advance

Hi
The JNI provides a native version to the java instanceof operator, this function takes two arguments
an object refrence and a class refrence and reports JNI_TRUE.
jclass myclass = env->FindClass("your class name");
if(env->IsInstanceOf(obj,myclass) == JNI_TRUE)
// obj is of type myclass
}Regards
pradish

How to determine the solution's ID in absl?

Hello Community,
I have a simple question yet I fear there is no simple answer (possibly no answer at all).
The question is:
Does any body know ways how to determine the ID (e.g. Y123ABCDY_) of the solution the code is running in?
My use case is the following:
We have a solution template which will be deployed in different customer tenant.
Thus, each deployment will have a different solution ID.
Now, somewhere in code, we generat PDFs using the OutputManagementUtilities.GetPDF reuse library.
This method requires the form template code of the pdf to be generated as a parameter.
However, this PDF form template code is composed of the solution ID and a fixed suffix.
Thus, currently I need to modify the absl code in each customer installation to manually modify the form template code prefix to the solutions solution ID.
Therefore I'd like to construct the form template code in absl but for this I need a way to determine the solution's ID.
Any ideas?
Best regards,
Ludger

Hi Fernando.
After reading your post I initially thought "what is the ObjectTypeCode" supposed to do any good to determine the solution ID"?
Using the Object Type code of a custom bo is indeed a way to solve this problem.
With a little additional code I can extract the relevant solution ID part from there.
Thanks for the hint, that was really useful.
Best reegards,
Ludger

How to determine the length of a curved path in illustrator CS2

how to determine the length of a curved path in illustrator CS2?

bornfree,
The free Patharea/Pathlength Filters from Telegraphics is your friend (the former gives you both area and length, both in different units):
Telegraphics - Free plugins for Photoshop & Illustrator...and other software

How to determine the maximum allowable length of a filename for Window ?

Hi all,
Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
However, while i try to extract some files from the zip file i just created, i encountered the error
java.util.zip.ZipException The filename is too long.
I am using the class ZipFile to extract the files from the zip file like the following
String absPath = "A very long filepath which exceed 260";
ZipFile zipF = new ZipFile(absPath); //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
Thanks

Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

How to determine the Benefit Salary based on P0168-BPLAN?

Similar Messages

Maybe you are looking for