How to determine the structure of parameter method in WebServiceDataControl

Hi all ,
I have a web Service Data Control ,this data control has web service method that take a parameter of type (java.lang.Object)
how can I determine the structure of this object to send it to the web service method
(how can create the object that satisfy the object parameter of web service data control)

I can see the constructor of data control which contain (name,age)
but I don't know how can I send these two parameter in one object that satisfy the type of object in the web service method
"parameterObject" : contain (name and age) values . (I don't know the type of "parameterObject" in web service)
Map params = operationBinding.getParamsMap();
params.put("arg0", parameterObject);

Similar Messages

How to determine the screen structure of the detail area of a screen...

Hi all,
How to determine the screen structure of the detail area of a screen?

Hi,
go to se38,
loop at SCREEN.
endloop.
put the cursor on SCREEN and press F1, then u can seee it.
Regards,
Pavan
Edited by: vishnu Pavan on Mar 23, 2009 11:03 AM

How to determine the solution's ID in absl?

Hello Community,
I have a simple question yet I fear there is no simple answer (possibly no answer at all).
The question is:
Does any body know ways how to determine the ID (e.g. Y123ABCDY_) of the solution the code is running in?
My use case is the following:
We have a solution template which will be deployed in different customer tenant.
Thus, each deployment will have a different solution ID.
Now, somewhere in code, we generat PDFs using the OutputManagementUtilities.GetPDF reuse library.
This method requires the form template code of the pdf to be generated as a parameter.
However, this PDF form template code is composed of the solution ID and a fixed suffix.
Thus, currently I need to modify the absl code in each customer installation to manually modify the form template code prefix to the solutions solution ID.
Therefore I'd like to construct the form template code in absl but for this I need a way to determine the solution's ID.
Any ideas?
Best regards,
Ludger

Hi Fernando.
After reading your post I initially thought "what is the ObjectTypeCode" supposed to do any good to determine the solution ID"?
Using the Object Type code of a custom bo is indeed a way to solve this problem.
With a little additional code I can extract the relevant solution ID part from there.
Thanks for the hint, that was really useful.
Best reegards,
Ludger

How to determine the u2018equivalent position of the same organizationu2019?

Hi,
"Position change is a transfer from one position to an equivalent position within the same org reporting structure and under the same chief position"
How to determine the u2018equivalent position of the same organizationu2019?
Cheers.

u can identity the position with help of the Holder
say for ex: A is the holder of the Position for Executive now the user performent an event called change of position so he changed to Manager (here we can find the chageing on the basis of some parameter so i have taken holder as Parameter as we dont know which has changed or wht has changed)
in this case we can use the report RHDESC20 se38
not an exact solution for ur question
will try to find some other way

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the field size

I am going to make a multiplatform application that hopefully
will run on linux and windows 2000.If the os is 2000, then I will use
vb.net/aspx else I'll use java servlets. I make the connection
to the web server ( through HTTP) not directly to database server.
So, the resultset will be stored in the String object. The columns
will be separated by delimeter. Our problem is how to determine
the size and type of the fields of mssql,oracle and postgres database
so that we can include it in the String object.
Ex.
String sResultSet=new String();
ResultSet rs=statement.executeQuery(sSQL);
while(rs.next()){
sResultset=sResultSet + rs.getString(field1) + "||" + rs.getString(field2) + "||";
vertical bars acts as delimeter
supposedly this is the code:
sResultset=sResultSet + rs.getString(field1) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||" + rs.getString(field2) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||";
supposedly this is the code if rs.getFieldType() and rs.getFieldSize() methods are existing
Anyone can give me an idea how to get the field type and field size of the database?
thanks in advance

Yes, but I dont know how to do it.
Can you give me an example of using it.
Thanks in advance

How to create a structure in a method

Hi
Would any please tell me how to delcare a structure in a method which contains a SAP defined structre in it . I have done it in normal ABAP but it not taking that syntax in ABAP objects method . Please tell me syntax for a method .
Thanks
Anita

Hello Anita
I assume you tried the statement
DATA: begin of <struct>.
In methods we have to use the following approach:
TYPES: begin of ty_s_struc.
TYPES:   field1   TYPE <fieldname>.
TYPES:   field2   TYPE <struct-fieldname>.
TYPES:   ...
TYPES: end of ty_s_struc.
DATA:
ls_struc     TYPE ty_s_struc,
lt_itab      TYPE STANDARD TABLE OF ty_s_struc
               WITH DEFAULT KEY.
I prefer to place my type definition in the "TYPES section" (see push button "Types" in SE24). However, all types defined within your class are <b>private</b> meaning you cannot use them in the interface of public methods.
Regards
   Uwe

How to determine the Support Team from Reported-by?

Hi All,
We need to determine the support team based on reported-by.
I have concluded it is only possible by customization of developing ZBADI from these threads:
Re: How to determine the Support Team from the Reported by?
Automatic determination support team based on own specs?
Re: Route tickets based on Message creaters's location
So we have created ztable which has relation between SAP component, Reported-by and Support Team.
Now i need to develope a ZBADI and assign to the action definition SLFN0001_ADVANCED_FIND_PARTNER(i hope).
Can anyone help me out with the piece of code. Because i don't which FMs to be called for read and update the support desk message.
Note: Action definition SLFN0001_ADVANCED_FIND_PARTNER uses method call Z_CRM_DNO_PARTNER_1(which is a copy of CRM_DNO_PARTNER_1 and applied some correction as per note: 1041455).
Thanks in advance.
Regards
Sanjai

closing this thread.

How to determine the support team in service ticket

Hi all,
can u guide me how to determine the support team in service ticket,
when ticket is created from customer system.is there any another way other than organizational structurel settings.
Thanks and regards,

Hi Venu,
You can get it done by development to determnie the support team , other tan org model settings
1.Develop the z table which will allow to maintain Sold to Party, Component, Support team
2. Implement the Badi for which will read the sold to party and component from the ticket and look in to ztable and fetch the corresponding support team and audate the support team feald in ticket.For this to take help of ur Abaper
3. For this to call the BADI have to confgure the actions with method call.
If u have any query revert
Regards,
Basha.

EEWB : how to determine the business object and the extension type ?

Hi,
I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
I need to add a new tab in the BaMI business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
Thanks for your help,
Marie

Marie,
In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
In the IMG:
Goto:
Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
You will then choose the transaction defined that you want to extend. If you display the details of the transaction you will find an attribute called:
"Leading Transaction Category". This tells you the general context in which the transaction is used. The other item to view is the assignment of business transaction categories found in the maintenance screen.
This information general corresponds to one of the options that the EEWB will give you on the transaction type.
As far as extensions go, my recommendation is the following:
- Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
- Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments. The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures.
Let me know if you have any further questions.
Good luck,
Stephen

Tablespace allocation type system how oracle determines the extent size

HI
It may be silly question but the I have to ask and get some knowdge
Suppose tablespace allocation_type is system then how oracle determins the inital extent and max extent size?

Was this tablespace converted to locally managed from an existing tablespace? If so, the existing extents still exist after the conversion. Also depending on the Oracle version and maybe platform the pct_increase parameter is still honored after the conversion which can lead to odd sizes. The current value of this parameter may not be the value that was in effect when extents were allocated.
Also Oracle enhanced the logic to not leave odd sized extents unused so that if by rights the system should take a 64K extent but there is a 56K extent available (perhaps at the end of a file) it can be used to fill the extent request.
HTH -- Mark D Powell --

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

How to determine the type of the jobject... similar to instanceof

hi,
I would like to know how to determine the jobject reference of an instance is of which class.
this is something similar to instanceof we use in java.
is there any thing like 'instanceof' in JNI. if there how to use it?
i got this as objective question for which answers were(i do not remember exactly)
1.instanceof
2.assignedto
i could nt het much help in googling.
thanks in advance

Hi
The JNI provides a native version to the java instanceof operator, this function takes two arguments
an object refrence and a class refrence and reports JNI_TRUE.
jclass myclass = env->FindClass("your class name");
if(env->IsInstanceOf(obj,myclass) == JNI_TRUE)
// obj is of type myclass
}Regards
pradish

How to determine the structure of parameter method in WebServiceDataControl

Similar Messages

Maybe you are looking for