How to determine the timeout setting?

I read all the items about the time out. I created a javascript function which informs you that you only have 5 (after that 1) minutes before logout. But in the profile file the setting for http timeout 180 and the rz11 setting icm/keep_alive_timeout is set to 60. But when waitng for 180 seconds I can still go on with the application. No timeout occur.
How can I determine the real timeout so I can use this in the setting for the Javascript (reading it for the system and concatenate into the javascript statement)!
With regards,
Frank Roels

Hai Frank,
You can follow the methodology described by thomas in this blog.
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1063. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
When I have opened this blog now it was not opened properly(Formating lost),Make sure that u read it properly.
Regard,
venkatesh.

Similar Messages

How to up the timeout setting to solve password reset portal error "Authentication gate timed out waiting for a challenge response"?

Hi Everyone,
We have the password portal up and running on one box and another server with FIM R2 and SharePoint 2010. All is good with the exception that our end users typically get distracted during the password registration and/or reset process and receive:
"An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000) ". The timeout kicks in after 5 minutes of inactivity in the browser.
The FIM Service log shows the following:
"Authentication gate timed out waiting for a challenge response".
I have confirmed that the default password portal web.config setting is <add key="SessionTimeoutInMinutes" value="20" />.
We have also updated Microsoft.ResourceManagement.Service.exe.config per this
article to the following but with no luck:
<resourceManagementClient resourceManagementServiceBaseAddress="myAddress" timeoutInMilliseconds="600000" />
<resourceManagementService externalHostName="myHost" dataReadTimeoutInSeconds="600" dataWriteTimeoutInSeconds="600"/>
We did not update the Windows SharePoint Servicesweb.config setting per the article about since we are on SharePoint 2010.
There is no NLB or firewall in front on this server.
If anyone has any solution to how to solve this on FIM R2/SharePoint 2010 please let me know.
Cheers!

FIM_Admin,
You could try changing the receiveTimeoutInSeconds parameter of the resourceManagementService node in your Microsoft.ResourceManagement.Service.exe.config file. However, you are warned not to do this unless instructed to by MS customer support.
http://msdn.microsoft.com/en-us/library/windows/desktop/ee652424(v=vs.100).aspx
http://technet.microsoft.com/en-us/library/ff800821(v=ws.10).aspx

Shopping cart : how to determine the timeout

Hello guys,
Where can I know (and modify) the Shopping cart Timeout?
Thanks for your input,
Regards,
Thomas

Hi Masa,
Thanks for your answer.
The point you're talking about is my issue. What does determine the Shopping Cart timeout?
Is it the Session Timeout? Or is there also a special value for the shopping cart.

How to determine the get/set methods of an element from the schema

Is there a way that I can obtain the java method call to an element using only the schema (maybe using SchemaTypeSystem, SchemaType, SchemaComponent)? For instance, as I traverse the schema is there a method that I can call that will return:
"getPurchaseOrder().getCustomer().getName()"
for the name element in the form of a string or some other representation?
Thanks in advance.
Joey

Sorry Manoj,
but i didn´t find out, why these programs should be able to solve my issue. They just display a picture using the CL_GUI_PICTURE control.
I am looking fo a way to resize a given control to the very maximum, so that it fills the whole SAPGUI window!
Thanks anyway...
MIKE

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the value of -D__SUNPRO_CC?

Could any body tell me how to determine the value of -D__SUNPRO_CC? Iam now using Sun Studio 9.
Thanks in advance.

The C++ Users Guide describes all the predefined macros set by the compiler.
The __SUNPRO_CC macro is a 3-digit hex number. The first digit is the C++ compiler major version number, which is 5 for all releases from WorkShop 5 in 1998 through the current release, Sun Studio 10. The second digit is the minor version number, increasing by 1 for each release in the major release series. The 3rd digit is a place holder for the very rare (none since 1994) cases when we have a micro version number. It is zero in current releases.
The current compiler release is C++ 5.7, so __SUNPRO_CC is set to 0x570.
You can see the macro setting by running
CC -dryrun -c foo.cc
and look for the -D__SUNPRO_CC =0xNNN on the ccfe command line.

Insufficient rights - How to determine the correct rights?

All,
Does anyone know how to determine the correct rights if you get the error message "Insufficient rights for operation"?
In SAP backend systems you can start transaction SU53 to check your "missing" authorizations, but is something like that also possible in MDM?
I also don't see any detailed information in the logs or reports.
If anyone has an good suggestion, please let me know, since I don't want to do "trail and error" to know what Functions to set to Execute and what Tables/Fields to set to Read/Write (because there are quite some combinations to check).
p.s. I've read the complete reference guide of the MDM console and sometimes it's really obvious what Functions and Tables/Fields you have to set, but for instance when I want to give authorization to maintain Relationships in the DataManager and have set the Main table and all Relationships to Read/Write and have set all Records and DataManager functions to Execute it still doesn't allow me to maintain the relationships on the records! I only get the message "insufficient rights" and it's unclear what rights are missing!
Regards,
Marcel

hi Marcel,
I doubt if we have anything in MDM to show you what authorizations are missing.However,you can check the following :
1. What activity are you trying to perform when you get this error.
2. Check if authorization are given in the role for that actitvity.
3. Check how many roles are allocated to user and Is authorization given in all roles if more than 1 role is assigned to that user?
Please let us know answer of the queries...
Regards,
Vineet

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the field size

I am going to make a multiplatform application that hopefully
will run on linux and windows 2000.If the os is 2000, then I will use
vb.net/aspx else I'll use java servlets. I make the connection
to the web server ( through HTTP) not directly to database server.
So, the resultset will be stored in the String object. The columns
will be separated by delimeter. Our problem is how to determine
the size and type of the fields of mssql,oracle and postgres database
so that we can include it in the String object.
Ex.
String sResultSet=new String();
ResultSet rs=statement.executeQuery(sSQL);
while(rs.next()){
sResultset=sResultSet + rs.getString(field1) + "||" + rs.getString(field2) + "||";
vertical bars acts as delimeter
supposedly this is the code:
sResultset=sResultSet + rs.getString(field1) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||" + rs.getString(field2) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||";
supposedly this is the code if rs.getFieldType() and rs.getFieldSize() methods are existing
Anyone can give me an idea how to get the field type and field size of the database?
thanks in advance

Yes, but I dont know how to do it.
Can you give me an example of using it.
Thanks in advance

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

How to determine the type of the jobject... similar to instanceof

hi,
I would like to know how to determine the jobject reference of an instance is of which class.
this is something similar to instanceof we use in java.
is there any thing like 'instanceof' in JNI. if there how to use it?
i got this as objective question for which answers were(i do not remember exactly)
1.instanceof
2.assignedto
i could nt het much help in googling.
thanks in advance

Hi
The JNI provides a native version to the java instanceof operator, this function takes two arguments
an object refrence and a class refrence and reports JNI_TRUE.
jclass myclass = env->FindClass("your class name");
if(env->IsInstanceOf(obj,myclass) == JNI_TRUE)
// obj is of type myclass
}Regards
pradish

How to determine the solution's ID in absl?

Hello Community,
I have a simple question yet I fear there is no simple answer (possibly no answer at all).
The question is:
Does any body know ways how to determine the ID (e.g. Y123ABCDY_) of the solution the code is running in?
My use case is the following:
We have a solution template which will be deployed in different customer tenant.
Thus, each deployment will have a different solution ID.
Now, somewhere in code, we generat PDFs using the OutputManagementUtilities.GetPDF reuse library.
This method requires the form template code of the pdf to be generated as a parameter.
However, this PDF form template code is composed of the solution ID and a fixed suffix.
Thus, currently I need to modify the absl code in each customer installation to manually modify the form template code prefix to the solutions solution ID.
Therefore I'd like to construct the form template code in absl but for this I need a way to determine the solution's ID.
Any ideas?
Best regards,
Ludger

Hi Fernando.
After reading your post I initially thought "what is the ObjectTypeCode" supposed to do any good to determine the solution ID"?
Using the Object Type code of a custom bo is indeed a way to solve this problem.
With a little additional code I can extract the relevant solution ID part from there.
Thanks for the hint, that was really useful.
Best reegards,
Ludger

How to determine the length of a curved path in illustrator CS2

how to determine the length of a curved path in illustrator CS2?

bornfree,
The free Patharea/Pathlength Filters from Telegraphics is your friend (the former gives you both area and length, both in different units):
Telegraphics - Free plugins for Photoshop & Illustrator...and other software

How to determine the maximum allowable length of a filename for Window ?

Hi all,
Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
However, while i try to extract some files from the zip file i just created, i encountered the error
java.util.zip.ZipException The filename is too long.
I am using the class ZipFile to extract the files from the zip file like the following
String absPath = "A very long filepath which exceed 260";
ZipFile zipF = new ZipFile(absPath); //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
Thanks

Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

How to determine the size of the JVM process?

Hi,
How to determine the total process size of the JVM process (that includes Heap, Non Heap and Native memory)?
Is there any command to obtain this value on Solaris (for Sun JVM)?
I refer the process size to http://middlewaremagic.com/weblogic/wp-content/uploads/2010/11/Java_Heap_Diagram_12.jpg) here.
Many thanks for your help in advance!

Hi,
Make sure that Total Heap + Native memory will be consider as total Memory.
That means in 32 bit you will have only at most 4 GB for process + additional 2 GB for OS.
So let assume if you have 4GM RAM then out of the 4GB you can allocate 2GB as Heap and 512m as Perm in case of Hot spot and remaining will be consider as Native memory.
But in case of 64 bit will change you will have good amount of the memory so you can use plenty of Heap and Perm size.
Still if you have query let me know.
Regards,
Kal

How to determine the timeout setting?

Similar Messages

Maybe you are looking for