How to determine the Xcelsius Theme and Colour scheme used in a dashboard

I would like to know what colour scheme and xcelsius Theme has been used in creating a given dashboard.  Kindly share this information
Thanks

Hi,
Xcelisus Thems cannot be used in professional dashboards.If you are doing any dashboard's for your internal team ,It would be ok..
But the best pratice is to create ur own colors,all along the dashboard..
Regards,
satish.p

Similar Messages

  • EEWB :  how to determine the business object and the extension type ?

    Hi,
    I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
    I need to add a new tab in the ‘BaMI’ business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
    Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
    Thanks for your help,
    Marie

    Marie,
    In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
    In the IMG:
    Goto:
    Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
    You will then choose the transaction defined that you want to extend.  If you display the details of the transaction you will find an attribute called:
    "Leading Transaction Category".  This tells you the general context in which the transaction is used.  The other item to view is the assignment of business transaction categories found in the maintenance screen.
    This information general corresponds to one of the options that the EEWB will give you on the transaction type.
    As far as extensions go, my recommendation is the following:
    - Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
    - Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
    Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments.  The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures. 
    Let me know if you have any further questions.
    Good luck,
    Stephen

  • How to determine which IP address and port is used to make DNS queries?

    I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
    But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
    all the requests are sent.
    When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
    DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
    How can I specify the IP address and port to use for my client???
    Thanks for your help.

    I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.

  • How to determine the system color and set them for my app?

    Hi,
    I'd like to set the colors of my application to the system's colors. Especially the backgrounds of my JPanels, JButtons and so on should look like in the operating system. If you change the systems color scheme, my application looks really wierd with it's grey canvas an components and the border and menu of the window is displayed in the system's colors.
    any idea??
    koem

    The UIManager only seems to have control over
    awt-controls. All swing controls are not listed, when
    you try this:
            UIDefaults defaults =
    UIManager.getLookAndFeelDefaults();
    for(Iterator i = defaults.keySet().iterator();
    ator(); i.hasNext();)
    String name = (String)i.next();
    System.out.println(name);
    }It would be nice to have it set globally somewhere in
    the program.
    koemActually, the truth is quite the opposite, the UIManager only has control over swing components.
    There are many ways you can set these globally. You can sublcass your own look and feel, use the system look and feel, call UIDefaults.put() etc.
    Graeme

  • How to determine the credit memo and invoice in table RBKP?

    Hi all,
    I want to specific the credit Memo and invoice in the table RBKP using MIRO.
    Does any body know that any field can be specific that ?
    Regards,
    Luke

    Hello
    The Field  XRECH - Invoice will be populated with an "x" if it is an invoice else will be blank if it is a credit memo in the  table RBKP.
    Regards
    Anis

  • How to create the Export Data and Import Data using flat file interface

    Hi,
    Request to let me know based on the requirement below on how to export and import data using flat file interface.....
    Please provide the steps involved for the same.......
    BW/BI - Recovery Process for SNP data. 
    For each SNP InfoProvider,
    create:
    1) Export Data:
    1.a)  Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
    ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider. 
    1.b)  All fields in each InfoProvider should be exported and included in the flat file. 
    1.c)  A process chain should be created for each InfoProvider with a start event. 
    1.d)  If the file exists on the target drive it should be overwritten. 
    1.e)  The exported data file name should include the InfoProvider technical name.
    1.f)  Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
    2) Import Data:
    2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
    ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
    2.b)  All fields for each InfoProvider should be mapped and imported from the flat file.
    2.c)  A process chain should be created for each InfoProvider with a start event. 
    2.d)  The file should be archived in the
    ctnhsappdata\iface\SCPI063\Archive directory.  Each file name should have the date appended in YYYYMMDD format.  Each file should be deleted from the \Out directory after it is archived. 
    Thanks in advance.
    Tyson

    Here's some info on working with plists:
    http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
    They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

  • How to determine the slew rate of an amplifier using lab view

    gud evening all
    I have an op amp circuit built on the NI ELVIS board and I input a square wave from function generator to the circuit. I have to determine the slew rate of the op amp.In the labs, one would run the square wave over a range of frequencies and stop when the square wave looks like a triangular wave. At that frequency, one would then measure the slope of the signal and that will give you the slew rate. How can I do that in LabVIEW? How can I check when my square wave starts looking like a triangular wave? please help
    good
    good

    thank you johnsold
    i designed a voltage follower using 741, on an Ni elvis instrument. i can manually do the slew rate experiment by varying the frequency range on the coasre frequency knob( using a square wave) of the function generator until the slew rate occurs at 0.5volts, my problem is how can i do the same experiment with built in vi in labview with out touching the knob on the function generator and once the triangular wave starts to show the lab view program will automatically stop.
    find attache my vi
    good
    Attachments:
    slew rate.vi ‏21 KB

  • How to test the communication stability and calculate ber using the CVI ?

    Our chief engineer gave me a task yeasterday.He asked me to do software testing and calculate bit error rate that we would know our communication stability.
    However,I have never touched this aspect of knowledge. I have known a bit about CVI and I want to write  bit error rate code using CVI.Thus,I could test the communication stability.
    But I don't know how to analyse and judge the receiving codes whether they are right or wrong.
    We use Modbus communication protocol and receive data via serial port,so I want to save all datas and record the total datas number ,marking as M.
    then,save the eligible datas and record the mumber marking as N. So, bit error rate is (M-N)/M   .
    Whether this is feasible ? Or you have any good idea. Thank you very much.
    unsigned char in_data[100];
    inqlen = GetInQLen (comport);
    for(i=0;i<inqlen;i++)
    in_data[i]=ComRdByte(comport);
     Above is my code that receive all datas and I want to save the array in_data[] data and record the number.
    switch(inqlen)
    case 19:
    crc=usMBCRC16(in_data,inqlen );
    if((in_data[1] == 0x03)&&(crc==0)&&(in_data[0]==device_addr))
     Above is the condition judgement that receive eligible datas which number marks as N.
    I know there is a precondition that I filter out all the wrong data . However ,I don't know any good idea. I will appreciate if anyone could help me.
    Thank you very much.
    Best regards.
    xiepei
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.
    Solved!
    Go to Solution.

    Hi xiepei,
    since you are using modbus, a simple error checking is implicit in the protocol and is the comparison between returned checksum and the calculated one on the received message: checksum errors, if any, are an effect of communications errors (you should have at least 2 bits changed and on particular patterns to have the checksum be calculated correctly!). You won't be able to calculate BER on them, but you can calculate PER (Packet Error Rate).
    Another flag for communication errors, on the other direction, is to intercept error messages from the device: if it fully implements modbus protocol, it should return some warning in case of error (I seem to remember that in some cases it returns the reveived message with some error bits added: please check in modbus documentation).
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to determine the last time  a database was used

    Is it possible in to determine the time a CRUD operation occurred on a database?

    How can I activate the auditing? http://download-east.oracle.com/docs/cd/B19306_01/network.102/b14266/auditing.htm#i1011984
    Daljit Singh

  • How to cleanse the Arabic-General and Address data using Data Services 3.1

    I m working in UAE project(Sap Customer & Vendor master) data migration. Main address and customer tables are builded in english and arabic equally.
    I can able to read the arabic data, but there is no clue, how to cleanse or modify those datas?
    Is it possbile to handle the arabic data in business objects-data services XI 3.1?
    Is it possible to use the EMEA address directories to cleanse or standandize the arabic data?
    Please help me out.
    Thanks in advance.

    Dear All,
    Anyone with any inputs for above question. Please advice
    Vamshi - im also looking for some advice as per your questions with arabic versions
    Best Regards

  • How to determine the presence of adobe pdf reader using java/J2EE?

    Can someone share this with me. I need to determing how do we determine if adobe reader is installed on a user's machine or not - using java/J2EE.
    Any ideas?
    Thanks,
    Pratik.

    I am in the software, where can I find it?
    On Tue, Jan 27, 2015 at 9:59 AM, Sara.Forsberg <[email protected]>

  • Tablespace allocation type system  how oracle determines the extent size

    HI
    It may be silly question but the I have to ask and get some knowdge
    Suppose tablespace allocation_type is system then how oracle determins the inital extent and max extent size?

    Was this tablespace converted to locally managed from an existing tablespace? If so, the existing extents still exist after the conversion. Also depending on the Oracle version and maybe platform the pct_increase parameter is still honored after the conversion which can lead to odd sizes. The current value of this parameter may not be the value that was in effect when extents were allocated.
    Also Oracle enhanced the logic to not leave odd sized extents unused so that if by rights the system should take a 64K extent but there is a 56K extent available (perhaps at the end of a file) it can be used to fill the extent request.
    HTH -- Mark D Powell --

  • How to change the page Header background colour in a Theme

    Hello,
    I want to know how to change the page header background colour. If you are in the Editor I don't find a property where to change it.
    If you are in the Theme Editor in the header bar I want to change stands <b>Theme Editor</b>. This (in my case blue colored bar) I want to change in another color.

    Hello Radhika,
    thanks for your answer. Where do I find the option for the pageheader in System Administration>Portal Display>Theme Editor ->IView Trays exactly?
    The pageheader is a picture, which must be uploaded for the web dynpro. Why should any webdynpro element in the ivew tray. There is no relationship between these two parts.
    I have not found any option to change the web dynpro pageheader. Could there any extra theme editor for webdynpro?
    Thanks.
    Olaf

  • How to keep the Sonogram settings and make them "Sticky"?

    I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
    Also the Sonogram loses it's frequency range settings while changing the zoom.
    Where is the feedback link for this application?
    Thanks

    are you talking about the spectrum analysis?

  • How to remove the default theme from "Revolution theme" to create our own movies and put our own background..

    how to remove the default theme from 'Revolution theme" to create movies of our own and a background..
    how to create chapter maker for movies...

    Are you using iDVD? Or iMovie?
    If iDVD, post in -> https://discussions.apple.com/community/ilife/idvd.
    If iMovie, post in -> https://discussions.apple.com/community/ilife/imovie.
    Good luck,
    Clinton

Maybe you are looking for