How to determine whether process Chain is active or Not

Hello Experts,
How to determine whether process Chain is active or Not, because i have large number of PC to activate.

Hi,
Please check this program in SE38---- /SSA/BWT
This program will give you information regarding all your process chains which are active and running based on there timings.
Hope it helps.
Regards,
AL

Similar Messages

How to identify whether that particular process chain is active or not?

Hi all,
How to identify whether that particular process chain is active or not ?
thanxs
haritha

If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
RSPCCHAIN
RSPCCHAINT
to check the logs
RSPCLOGS
RSPCPROCESSLOG
Give the chain name and check in the object version.
Khaja

How to determine whether a recordset is Empty or not ?

Please see my snippet code below :
<%
 String sql="";
 String username="CDS";
 try
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 Connection con = DriverManager.getConnection("jdbc:odbc:Employees","","");
 Statement stmt = con.createStatement();
 ResultSet rs=null;
 sql = "Select * from Employee where code='" + username + "'";
 rs = stmt.executeQuery(sql);
 rs.next();
 if (rs==null)
 %>
 <jsp:forward page="Login.jsp?msg=Username not recognized"></jsp:forward>
 <%
 else
 %>
 <jsp:forward page="Login.jsp?msg=Halo"></jsp:forward>
 <%
 catch(ClassNotFoundException e)
 out.println("Driver not found");
 catch(SQLException e2)
 out.println(e2.getMessage());
 out.println(" ");
 out.println("Wrong SQL Statement");
 out.println(" ");
 out.println(sql);
 out.println(" ");
 %>How to determine whether a recordset has no result ?
From the above code, i use if (rs==null) and that's not worked.
Help me, guys.

ResultSet rs = stmt.executeQuery(sql);
if (rs.next()) {
%>
 <jsp:forward page="Login.jsp?msg=Halo"/>
<%
} else {
%>
 <jsp:forward page="Login.jsp?msg=Username not > recognized"/>
<%
}

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to test the process chains

hi sap gurus,
Can anybody tell me how to test the Process chains before i load real time data,i run process chains every morning 6.15 am,before that i want to test every process is linked to another.
thanks in advance.

Hi,
Scheduling the process is the only way to check whether it is running fine or not. The process chains should be checked first in the Dev server and then in the QA server before transported to Prod.
You can also check the process chain using the "check" button to see if the processes are in the proper sequence or not.
There is a "log" button to keep track of the progress of the chain
suresh

How to Notify if Process Chain DOES NOT complete?

How do I use Process Chains to notify me if the end process of a chain DOES NOT run by a certain time? Example: Chain starts at 6PM every night, always finishes by 7:30. If it doesn't complete by 8:00, I want to be notified. I can spawn an event on completion of the chain, but the 8PM job has to notify me ONLY IF this event is not active. How to do that?

Well you can make the ABAP process type send message
RSPC>from main menu Settings>Maintain process types
change mode -->select process type "ABAP" and change "possible events" to "Process ends successful or Incorrect" save it.
come out of process chain and goto the process chain maintenance again.
In regards to your question of 18 steps ,as i said you only need this ABAP process type once at the END of the Process chain to SET the flag status = X.
Another Process chain runs at 8.00 with only one process type ABAP process type to check the status in table if empty or X and send message accordingly,
Fyip - table RSPROCESSLOG and FM - RSPC_PROCESS_FINISH also available at your disposal to get some leads.
You can wait until some one has better solution and implemented it before,i just put my thoughts in to it,its not imperative for you.
I leave the thoughts with you.
Hope it Helps
Chetan
@CP..

How to debug completed Process chain

Hi Experts,
Can you please let me know how to debug completed Process chain.
In my Process Chain, we have one ABAP step to update Z-Table entries.
But it was updated wrong entry into Z-Table.
Now i want to debug ABAP step in Process chain which was completed successfully (This is Monthly load).
I have tried to debug the back ground job but it throws an error message in middle of the debugging.
Could you please tell me how to debug ABAP step in completed Process Chain.
Thanks
Shaik

http://help.sap.com/saphelp_nw04s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
http://help.sap.com/saphelp_nw70/helpdata/en/21/15843b74f7be0fe10000000a114084/frameset.htm
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
http://help.sap.com/saphelp_nw70/helpdata/en/21/15843b74f7be0fe10000000a114084/frameset.htm
1.Go to RSPC to view all the chains.
2.There click on any chain which you want to run/view.
3.Click on the log view(shift+F1) to view all the previous runs of the chain and whether they have failed or successful(here you can select 1 day,week ,month etc in the display range)
4.If you want to modify the chain /add a process type /change the variant then click (Ctrl+F9) and do the changes.
Even you can change the start variant in change mode for manual scheduling>right click on start process typeselect display variant--now select start Direct Scheduling/ API or Metachain
under direct scheuling option you can trigger it by setting start immediately /Date-time/After job/event whatever you want to do
Else you can make it part of a Metachain consisting of different such small local process chains.
Now Click on Schedule (F8) to run this chain manually.
5.For Monitoring use Tcodes SM37/RSPCM/SM50
Also you can use BWCCMS.
I usually prefer sm37 to view all the background jobs but SM50 is also useful.
6.debug loop can be used to debug a process chain.(you have to specify here the gap between one event been triggered and the next subsequent process starting)
to capture process in debugger go to SM37(job overview) or to SM50(process overview)
Hope this would help you.

How to kill a process chain in an intermediate step...?

How to kill a process chain in an intermediate step...?
I have tried doing it using SM37... but still the chain is hanging....
Please help ASAP...
Regards
Sneha

Hi Sneha,
If its a loading process then:
1. Go to monitor & make its overall status RED.
2. Go to the target & make the QM status RED.
3. Since its loading data to BW, its R/3 will be active even if you make any status RED in BW.
4. Cancel its corresponding R/3 job. U'll get its R/3 job from monitor>Header tab>Job name. Copy that job name& go to R/3 side>sm37>in Job name add B*followed by the job name copied & then delete the Active job.
Once this is done then your loading process will anyhow stop further stopping the Process chian.
If your job is other than loading, then simply go to that process chain & remove the link between the active process nad the next process after cancelling the active job (as mentioned in the various replies for your question).
Give some time to update the staus of that cancelled job in Db, because even if you cancel any active job, it requires some time to refresh it updated status. Once it is cancelled you can rejoin the link between the proceses and reactivate & schedule your process chain.
hope it'll help

How to kill the process chain

hi,
I have question how to kill the process chain during running.
thank you.

Hi
If the process chain is running in background,
goto SM37
Give * in the jobname
Give the username who scheduled the process chain
Job status - check the check boxes - SCHED, relased, ready, active
click execute.
It displays all the process chains that, scheduled & running.
You can select the process chain that need to be stopped & click STOP active job or ctrl+F1.
Hope this helps!
Kindly award points for all useful answers.
If you post the BW related queries in the BI general forum, you will get more answers.
Best regards,
Thangesh

How to schedule the process chain fr the report

hai experts,
i have a query which i need to generate for every five hours? i know that we can generate the report thr process chain but i dont know how to build that..
my question is how to schedule the report,how to build the process chain,....
can any one plz tell me how to start this generating report for every five hours
thanks in advance..points will be alloted surely ,i need this urgently..
Suri

First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Also, have a look at this links to make urself clear about the steps in creating Process Chain.
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
Hope it helps.
Regards,
Archna

How to find out whether USER-EXIT is active or not

Hello!
How can I find out whether USER-EXIT is active or not ?
I set a break-point at these points and nothing happens
if I want save my daocument ???
Why
PERFORM USEREXIT_SAVE_DOCUMENT.
PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Ragards
Ilhan

Hi Ilhan
The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
When placing breakpoints, don't use Breakpoints > Breakpoint at > Statement... and enter
PERFORM USEREXIT_SAVE_DOCUMENT
because you won't get any hits since the function module names are stored dynamically.
Rather use Breakpoints > Breakpoint at > Function Module... and enter
USEREXIT_SAVE_DOCUMENT
for a better chance of hitting the breakpoint.
Cheers
Lyal
Message's terrible grammar was edited by:
Lyal Schumann

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to move the process chain from Unassigned node to a new node in 3.5?

Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja

Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram

How-to trigger a process chain using ABAP?

Does anybody know how to trigger a process chain using ABAP code?
Any help would be appreciated!
Thanks
Ioan

Hi Ioan,
try this in your ABAP:
    CALL FUNCTION 'BP_EVENT_RAISE'
      EXPORTING
        eventid         = 'Your Event'
        eventparm       = 'START'
        target_instance = ' '
      EXCEPTIONS
        OTHERS          = 01.
and schedule your process chain, waiting for 'Your Event'.
regards
Siggi

How to stop a process chain when its running?

Dear Experts,
How to stop a process chain when its running? is it that a chain can be stoppend when we open an info package of that chain ?
Thank you,
Raj

Hi,
Goto the main menu process chain --> choose the remove from the Schudule...
Regards
sathis
I hope it helps to u... please assign the points

How to determine whether process Chain is active or Not

Similar Messages

Maybe you are looking for