How to determine which device made purchase

I have multiple devices for all our family/children. If an app store purchase is made and I want to know which device made the purchase, how do I determine this?
All devices have their own unique Apple ID for iMessage, but all tied to the same AppStore/iTunes account.

As long as the purchase stays on just the device that made the purchase you have your culprit. Once the purchase has been shared among multiple devices there is no way to tell upon which device the purchase was made.

Similar Messages

How can i tell which device made the itune purchased

hi every one i just want to know how to tell which device made the purchased in itune thanks.

Not much you can do...unless the bill indicates the class of device, such as iPad, so you can narrow it down.
If all have access to the same accounts using the same credit cards and do not have to identify themselves, there just isn't much you can do to tell who did the download.

I have multiple AppleTV's at different locations. Is it possible to determine which specific AppleTV purchased a movie, by tracking some type of physical device ID (similar to a hard coded MAC address or serial number)?

I have multiple AppleTV's at different locations. Is it possible to determine which specific AppleTV purchased a movie, by tracking some type of physical device ID (similar to a hard coded MAC address or serial number)?

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

How can i determine which devices are used at the moment?

Hi all,
I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface. I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
Thanks,
Omer
Solved!
Go to Solution.

Hi Omer,
so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to determine which chipset my Satellite L300/700 has?

I have a SATELLITE L300/700 (PSLB8A-047004). The User Guide covers several models. It indicates that the chipset determines which memory modules I need for a memory upgrade. How do I find out which chipset I have, please?
Kev.

> I'm still curious about how to determine which chipset I have - any thoughts?
Go to the device manger and click on IDE Ata/Atapi controllers:
http://img814.imageshack.us/img814/7321/chipset.jpg
There you will see your chipset installed on your laptop. In my case, as shown on the screenshot is Intel ICH9m

How to determine which elements are queryable via Web Services QueryPage

I am trying to query opportunities by associated opportunity product revenue records, but I continue to receive errors like "Unexpected text: = '9598015'".
From reviewing the forums, it looks like this is when I am querying a field that is not defined to be queryable.
Could someone please tell me how to determine which fields are queryable on a particular record type like this? I have tried using basic short text fields and indexed short text fields - but continue to receive the error message above.
Thanks in advance.

I found at least partial answers to my questions.
MessageContext.getPropertyNames() can be used to see the properties on a given flow.
MessageContext.getProperty(prop) can be used to get information for paroperties such as:
prop=javax.xml.rpc.service.endpoint.address
prop=wsdl.portName
-- Frank

How CSSCAN determines which indexes need to be rebuild ?

Hi everybody,
i'm currently migrating 3 Oracle databases that contain CP1252 characters unproperly stored in WE8ISO8859P1 instances.
The key steps of the migration are :
1. ALTERing CHARACTERSET to WE8MSWIN1252
2. changing CHARACTER SEMANTIC LENGTH for CHAR and VARCHAR2 columns
3. truncating data stored in VARCHAR2(4000) columns
2. Full export
3. Full import in a ALL32UTF8 instance
To do all of this (and especially the step 3), i use the CSSCAN utility (very practical !!!).
And i have a question about CSSCAN: how CSSCAN determines which indexes need to be rebuild. What is the logic ?
Looking at the CSSCAN report, i have a lot of cells/columns that are affected by the characterset migration, and i have just a few index to rebuild.
Why would i like to understand the logic ? Because i would like to rebuild ONLY indexes that REALLY need to be rebuilt and i am not sure that all the indexes specified by CSSCAN really need to be rebuilt.
Thanks for any information about that.
(and sorry for my english)
NB: i have managed "function-based indexes" specifically: i drop them before the export, and i recreate them after the import. So my question mostly target the "regular indexes"

1. All indexes whose key contains at least one character column with convertible or exceptional data, excluding indexes with names equal to some constraint name for the same owner.
plus
2. All functional indexes on tables that have columns needing conversion, excluding indexes with names equal to some constraint name for the same owner.
The condition regarding constraints does not seem to be very fortunate but it comes from times when the appropriate flag in index metadata was not yet available.
But note that in your migration scenario, you do not actually have to care much about indexes. Step 1 & 2 do not need any modifications to the user data and hence to index contents. Step 3, if done through UPDATE, will modify affected indexes automatically. Step 4 does not affect the database. Step 5 will recreate all existing indexes anyway.
-- Sergiusz

How to tell which device in-app purchases were made from?

When looking at account purchase history, how can I tell which device purchases were made from for in-app purchases?

Hey HeardItHere,
You can view your purchase history by checking iTunes. It will include in-app purchases. You can find out how to do so here:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, you'll receive an invoice by email each time your credit card is charged. An invoice is sent approximately every $20 or 12 hours, whichever occurs first.
Sincerely,
Delgadoh

How can I find out which device made a purchase on my account?

I have three children that are all attached to my iTunes account. Two of them are very good at asking me before downloading anything. One of them (my boyfriend's son) doesn't understand the concept of reading before downloading even though he's been reminded a billion times, and keeps making in-app purchases. I am trying to figure out which in-app purchases he made so that my boyfriend can pay me back, but all three kids are denying doing anything. Is there any way to tell which device has made certain purchases? I have already turned off the in-app purchase option under settings, so it shouldn't be a problem ever again, but I'd still like to know who did what. Thanks!

With "consumable" in-app purchases such as in-game currency the evidence might be visble in the app, assuming the app in question is on more than one device to start with...
tt2

Can I see which device made original purchase on itunes?

My kids live in another state but I have their ipods (touch) on my iTunes account. I was wondering if I can see which device orders an app?

No

How to determine which file descriptor opened my driver?

Suppose a user process opens my driver twice. How does open() determine which file descriptor opened the device? In Linux, the kernel will pass a pointer to a structure which represents the open file descriptor. However, Solaris only passes the device number to open(), so I can only determine my device was opened, but not which file. I need this information because my driver needs to keep track of all file descriptors opened for the device.
Thanks!
-Darren

I'm still at a loss why you need to know the file descriptor value (unless the app is sufficiently spaghettied that it has to query the driver to figure out what it opened with what). It's like asking what filename was used to open the device (which you can't get either). Since Solaris is based on a Streams framework, it would be bad to have drivers to even think it has a direct mapping into user space. It would be the same in asking (using /bin/sh):
prog3 4>&1 3>&1 2>&1 | prog2 | prog1
and you want to know from prog1 what descriptor prog3 wrote to. I don't see how linux even does this properly, since any given file open can have multiple file descriptors (via dup).

How to determine which Aperature Library is the original?

I purchased an Imac a couple of years ago and switched to Aperature to help eliminate duplicates. I spent time bringing them in a little at a time as not to duplicate. I have moved what I thought was the master copy to an external drive so that it would not take up all the space. I show eight copies of Aperature when I click option & then Aperature. Please help me determine which is the main copy as they all have different version and original numbers. I am so confused and was just trying to break it down so that I could manage it in even years at a time so that I could organize faces. Not even really sure what version means as opposed to original. I hope with some guidence I can finally get this right. Thank you in advance if you understand where I am coming from

My short guide here may help you understand the parts of Aperture better, which in turn will help you ask specific questions.
I advise all users of Aperture to read and understand the first seven chapters of the User Manual -- it's available on-line, as well as via "Help➞Aperture Help" -- as they provide a tour of the interface.
You are going to have to do some work. I can tell that you are confused -- Aperture, assuredly, is confusing at first -- but I can't tell what you are asking. You need to distinguish, in your questions, between the files you imported (Aperture calls these "Originals" after you've imported them) and the Images in Aperture (Aperture refers to these as both Images and as Versions). Every Image has an Original. The Original (remember, it's a file) can be stored inside the Aperture Library package, or outside the Library package. These distinctions are covered in both of the resources mentioned above.
If nothing makes sense, post back and we'll see how we can help you.
--Kirby.

How to determine which diskgroups a database is using

We want to be able to determine which diskgroups a database is using. We have been using the following query which works but only if the database has open or had open the "right set of files" recently --
SQL> select dg.name from v$asm_diskgroup_stat dg, v$asm_client c where dg.group_number = c.group_number and c.db_name = 'MYDB';
If no archived logs have been generated in a while then the diskgroup that contains the FRA will no be listed in this query. We can cause the FRA diskgroup to show up if we archive the current log. Here is an example.
SQL> select * from v$asm_client;
GROUP_NUMBER INSTANCE_NAME
DB_NAME STATUS
SOFTWARE_VERSION
COMPATIBLE_VERSION
            5 +ASM
DBI03    CONNECTED
11.2.0.3.0
11.2.0.0.0
SQL> alter system archive log current;
System altered.
SQL> select * from v$asm_client;
GROUP_NUMBER INSTANCE_NAME
DB_NAME STATUS
SOFTWARE_VERSION
COMPATIBLE_VERSION
            5 +ASM
DBI03    CONNECTED
11.2.0.3.0
11.2.0.0.0
GROUP_NUMBER INSTANCE_NAME
DB_NAME STATUS
SOFTWARE_VERSION
COMPATIBLE_VERSION
            7 +ASM
DBI03    CONNECTED
11.2.0.3.0
11.2.0.0.0
Notice how diskgroup "7" shows up after the log is archived? It appears that the instance for diskgroup "7" will eventually be drop off after some idle period. Is there a way to generate the list of diskgroups consistently?

Hi,
If your database was configured manually (i.e not using DBCA) you should check v$(datafile,controlfile,logfile,block_change_tracking,etc) and parameters of database (log_archive_dest,db_recovery_file_dest,spfile,etc) to map these info.
If your database was configured using DBCA you can try it:
$ srvctl config database -d <database_name> |grep "Disk Groups"

How to determine which FileChooser ExtensionFilter has been selected

Hi,
I'm using a JavaFX fileChooser.showSaveDialog with two extension filters (*.csv and *.xml). How can I determine which filter was selected when the end-user clicks the save button?
I am writing a program that allows the end-user to create an output file in CSV or XML format.
If the end-user enters a file name with no extension, I need a way to determine if I should create a CSV or XML file. I would also like to add the proper extension to the file name if none is specified by the end-user. I want to do this based on which filter the end-user has selected. I wrote a Java program 5 years ago and I was able to do this with the following instruction:
String extension = jFileChooser.getFileFilter().getDescription();
I can't find a similar instruction for JavFX.
My JavaFX Code:
FileChooser fileChooser = new FileChooser();
fileChooser.setInitialDirectory(new File(options.getOutputDirectory()));
ExtensionFilter filter1 = new FileChooser.ExtensionFilter("Comma Delimited (*.csv)", "*.csv");
fileChooser.getExtensionFilters().add(filter1);
ExtensionFilter filter2 = new FileChooser.ExtensionFilter("XML Document (*.xml)", "*.xml");
fileChooser.getExtensionFilters().add(filter2);
File file = fileChooser.showSaveDialog(stage);
String filename = file.getAbsolutePath();...How do I determine which extension filter has been selected?
My Java Code:
JFileChooser jFileChooser = new JFileChooser();
jFileChooser.setCurrentDirectory(new File(outputDirectory));
jFileChooser.setSelectedFile(new File(backupfile));
FileFilter filter = new FileNameExtensionFilter("Comma Delimited (*.csv)", "csv");
jFileChooser.addChoosableFileFilter(filter);
jFileChooser.setFileFilter(filter);
filter = new FileNameExtensionFilter("XML Document (*.xml)", "xml");
jFileChooser.addChoosableFileFilter(filter);
jFileChooser.setAcceptAllFileFilterUsed(false);
jFileChooser.setDialogTitle("Export Alarms");
jFileChooser.setBackground(colorFileChooser);
int returnVal = jFileChooser.showDialog(jFrame, "Export");
if (returnVal == JFileChooser.APPROVE_OPTION) {
    File file = jFileChooser.getSelectedFile();
    String filename = file.getAbsolutePath();
    String extension = jFileChooser.getFileFilter().getDescription();
    if (extension.equals("XML Document (*.xml)")) {
        if (!filename.endsWith(".xml") && !filename.endsWith(".XML")) {
            filename = filename + ".xml";
        saveTableXML(filename);
    else if (extension.equals("Comma Delimited (*.csv)")) {
        if (!filename.endsWith(".csv") && !filename.endsWith(".CSV")) {
            filename = filename + ".csv";
        saveTableCSV(filename);
}Thanks,
Barry
Edited by: 907965 on May 13, 2012 1:14 PM
Edited by: 907965 on May 13, 2012 1:15 PM
Edited by: 907965 on May 13, 2012 1:19 PM

This problem is currently tracked as http://javafx-jira.kenai.com/browse/RT-18836.

How to determine which Windows application has focus

I'm new to JAVA and new to programming. I hope someone will help me out. I'm trying to write a simple JLink program (JLink is a JAVA API for Pro|Engineer, a CAD design program). In part of this program I need to determine if Pro|E has focus. Is there some way to use JAVA to determine which actively running Windows application has focus?
I basically want my program to pause when focus changes to another program. For example: While Pro|E is active and has focus the program runs, when I select an Excel window, or Outlook, or Notepad or any other window my program will pause until focus is returned. I just need to determine which window within Windows has focus.
I hope I have explained this properly. I searched the internet for an answer but found nothing. I did come across some references to JNI, but I'm not sure what that is or how to use it.
Thank you!

I just need to determine which window within Windows has focus.No, you don't. All you need to determine is whether your application has the focus. If it doesn't, then some other application does, but it's really irrelevant which one does. All that's relevant is that your application doesn't have the focus and hence it should pause.

How to determine which device made purchase

Similar Messages

Maybe you are looking for