How to Determine which DIMM to Replace Given Kernel Panic Report
I have a dual cpu, mid-2010 Mac Pro with 32GB of Kingston RAM (8 4gb modules). Once a week or so, it suffers a kernel panic that appears to be caused by a RAM problem. Here is a typical one:
Mon Jul 18 10:01:26 2011
Machine-check capabilities (cpu 17) 0x0000000000001c09:
family: 6 model: 44 stepping: 2 microcode: 15
Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
Package 1 logged:
IA32_MC8_STATUS(0x421): 0xfe0000800001009f valid
Channel number: 15 (unknown)
Memory Operation: read
Machine-specific error: Read ECC
COR_ERR_CNT: 4
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
Error overflow
IA32_MC8_ADDR(0x422): 0x0000000408aa4340
IA32_MC8_MISC(0x423): 0x29d7aef000040383
DIMM: 0
Channel: 1
Syndrome: 0x29d7aef0
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0000000000000000 invalid
They all point to DIMM 0, Channel 1, and indicate addresses like 0x00000004xxxxxxxx. My question is: If I am interested in replacing the suspect DIMM, which one is it?
In the User Guide, it indicates I have 8 memory slots, organized in two chunks, each chunk adjacent to a cpu. The diagram says that Slots 1-4 are adjacent to one CPU, and Slots 5-8 are adjacent to the other. I, of course, filled all of them myself. System Profiler tells me about DIMMs 1-8. The kernel panic report seems to tell me that DIMM 0 is to blame, perhaps DIMM 0 in Channel 1. Here is a representation of the slot layout in the User Guide:
slot 5 CPU
slot 6 slot 4
slot 7 slot 3
slot 8 slot 2
CPU slot 1
latch latch
where the bottom of the diagram is toward the side of the tray that has the latches that release the tray. The form of answer I'd like to see is something like: Replace the DIMM in Slot 1. Or perhaps: Replace the DIMMs in slot 1 and slot 5.
Perhaps I wasn't clear. The Genius *did* look it up - it took him about 5 actual minutes - and he said that all he could tell was that it was a memory error of some sort. I was asking him specifically what the 4 and 66 meant as well as the hex number. And with a ton of google I was unable find much about it.
I know quite a lot about how to eventually find the bad DIMM, if there is one. The machine in question is used heavily for Photoshop, InDesign, audio editing, some video editing, and programming, and if the memory failures (or memory controller errors) were more frequent, I would engage in classical isolation techniques - and I probably will have to. It simply seemed to me that the information I need is in the kernel panic logs.
Similar Messages
-
How to determine which elements are queryable via Web Services QueryPage
I am trying to query opportunities by associated opportunity product revenue records, but I continue to receive errors like "Unexpected text: = '9598015'".
From reviewing the forums, it looks like this is when I am querying a field that is not defined to be queryable.
Could someone please tell me how to determine which fields are queryable on a particular record type like this? I have tried using basic short text fields and indexed short text fields - but continue to receive the error message above.
Thanks in advance.I found at least partial answers to my questions.
MessageContext.getPropertyNames() can be used to see the properties on a given flow.
MessageContext.getProperty(prop) can be used to get information for paroperties such as:
prop=javax.xml.rpc.service.endpoint.address
prop=wsdl.portName
-- Frank -
How to determine which chipset my Satellite L300/700 has?
I have a SATELLITE L300/700 (PSLB8A-047004). The User Guide covers several models. It indicates that the chipset determines which memory modules I need for a memory upgrade. How do I find out which chipset I have, please?
Kev.> I'm still curious about how to determine which chipset I have - any thoughts?
Go to the device manger and click on IDE Ata/Atapi controllers:
http://img814.imageshack.us/img814/7321/chipset.jpg
There you will see your chipset installed on your laptop. In my case, as shown on the screenshot is Intel ICH9m -
How CSSCAN determines which indexes need to be rebuild ?
Hi everybody,
i'm currently migrating 3 Oracle databases that contain CP1252 characters unproperly stored in WE8ISO8859P1 instances.
The key steps of the migration are :
1. ALTERing CHARACTERSET to WE8MSWIN1252
2. changing CHARACTER SEMANTIC LENGTH for CHAR and VARCHAR2 columns
3. truncating data stored in VARCHAR2(4000) columns
2. Full export
3. Full import in a ALL32UTF8 instance
To do all of this (and especially the step 3), i use the CSSCAN utility (very practical !!!).
And i have a question about CSSCAN: how CSSCAN determines which indexes need to be rebuild. What is the logic ?
Looking at the CSSCAN report, i have a lot of cells/columns that are affected by the characterset migration, and i have just a few index to rebuild.
Why would i like to understand the logic ? Because i would like to rebuild ONLY indexes that REALLY need to be rebuilt and i am not sure that all the indexes specified by CSSCAN really need to be rebuilt.
Thanks for any information about that.
(and sorry for my english)
NB: i have managed "function-based indexes" specifically: i drop them before the export, and i recreate them after the import. So my question mostly target the "regular indexes"1. All indexes whose key contains at least one character column with convertible or exceptional data, excluding indexes with names equal to some constraint name for the same owner.
plus
2. All functional indexes on tables that have columns needing conversion, excluding indexes with names equal to some constraint name for the same owner.
The condition regarding constraints does not seem to be very fortunate but it comes from times when the appropriate flag in index metadata was not yet available.
But note that in your migration scenario, you do not actually have to care much about indexes. Step 1 & 2 do not need any modifications to the user data and hence to index contents. Step 3, if done through UPDATE, will modify affected indexes automatically. Step 4 does not affect the database. Step 5 will recreate all existing indexes anyway.
-- Sergiusz -
How do you determine what is causing a reoccurring kernel panic?
I need help trying to determine what is causing a reoccurring kernel panic.
Mon Oct 27 14:59:57 2014
panic(cpu 0 caller 0x235410): "zalloc: \"kalloc.8192\" (209 elements) retry fail 3, kfree_nop_count: 0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/kern/zalloc.c:992
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x32513c78 : 0x21b837 (0x5dd7fc 0x32513cac 0x223ce1 0x0)
0x32513cc8 : 0x235410 (0x594ac8 0x593511 0xd1 0x3)
0x32513d68 : 0x22096a (0x33bf2d8 0x1 0x32513d98 0x0)
0x32513da8 : 0x2209aa (0x1698 0x1 0x32513dc8 0x2a45c9)
0x32513dc8 : 0x210703 (0x1698 0x246 0x32513e68 0x20ff8e)
0x32513df8 : 0x21db5d (0x10f8 0x0 0x1019b0 0x188bf3)
0x32513e38 : 0x210a86 (0xb65a900 0x0 0xb4dcce0 0x7646150)
0x32513e98 : 0x216f84 (0xb65a900 0x0 0x0 0x0)
0x32513f18 : 0x295914 (0x32513f44 0x0 0x0 0x0)
0x32513fc8 : 0x2a20f8 (0x5dde400 0x1 0x2a17ab 0x661c940)
BSD process name corresponding to current thread: mimiosys
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac9,1 (Mac-F2218EA9)
System uptime in nanoseconds: 27253242200826
vm objects:4257220
kernel map entries:2514908
kalloc.32:1425408
kalloc.64:2306048
kalloc.128:1204224
kalloc.256:1478656
kalloc.2048:1331200
kalloc.8192:1712128
vm pages:19741128
ipc ports:25930128
threads:217364000
x86_64 saved state:63879264
uthreads:110016272
vnodes:3443220
HFS node:4908420
HFS fork:2076704
buf.8192:9682944
Kernel Stacks:1245184
PageTables:15859712
Kalloc.Large:3046980
unloaded kexts:
com.apple.driver.AirPortBrcm43xx 423.91.27 (addr 0xeeb000, size 0x1900544) - last unloaded 84747336727
loaded kexts:
com.apple.filesystems.udf 2.1.1 - last loaded 2901770802225
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.GeForce 6.3.6
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.nvidia.nv50hal 6.3.6
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.AppleUSBHIDMouse 162
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleHIDMouse 162
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0Visit The XLab FAQs and read the FAQ on diagnosing kernel panics.
-
How to detect which physical drive a given file is on
Given a file that exists, is there a way within Java to detect what physical drive that file is on? I don't care how that drive is denoted, as long as it is uniquely specified. This can be through a hard drive serial number, or any other way. The specifics of the drive do not matter, I only care about uniquely identifying physical drives. If it matters, I'd like to also be able to determine if said drive is a flash drive, however programmatically I won't care that it is a flash drive, just that it is a separate drive itself.
If this isn't possible through Java, could someone point me in the direction of how to determine this through another language, possibly using JNI?mgolowka wrote:
Given a file that exists, is there a way within Java to detect what physical drive that file is on?
Check if this helps you, I'm not sure the effects when this is executed in a Unix based environment.
public static void main(final String[] args) {
final String fileName = "my_file.myext";
final File file = new File(fileName);
final File roots[] = File.listRoots();
final String rootOfTheFile = file.getAbsolutePath().substring(0,
file.getAbsolutePath().indexOf(File.separator))
+ File.separator;
System.out.println("File is present in - " + rootOfTheFile);
for (final File file2 : roots) {
System.out.println("Root in system - " + file2.getPath());
}And the output for the code is as follows, of which Y and Z are network mapped drives.
File is present in - D:\
Root in system - C:\
Root in system - D:\
Root in system - E:\
Root in system - F:\
Root in system - Y:\
Root in system - Z:\ -
How to determine which file descriptor opened my driver?
Suppose a user process opens my driver twice. How does open() determine which file descriptor opened the device? In Linux, the kernel will pass a pointer to a structure which represents the open file descriptor. However, Solaris only passes the device number to open(), so I can only determine my device was opened, but not which file. I need this information because my driver needs to keep track of all file descriptors opened for the device.
Thanks!
-DarrenI'm still at a loss why you need to know the file descriptor value (unless the app is sufficiently spaghettied that it has to query the driver to figure out what it opened with what). It's like asking what filename was used to open the device (which you can't get either). Since Solaris is based on a Streams framework, it would be bad to have drivers to even think it has a direct mapping into user space. It would be the same in asking (using /bin/sh):
prog3 4>&1 3>&1 2>&1 | prog2 | prog1
and you want to know from prog1 what descriptor prog3 wrote to. I don't see how linux even does this properly, since any given file open can have multiple file descriptors (via dup). -
How to determine which configuration is being used within a page/view?.
If I click on the little cog icon to take me into the AET for a given assignment block, how do I know which configuration is being used?. Usually one is highlighted, but the case of the Accounts main address assignment block these details are not shown. As there probably 30 of them I though there must be a quick way to determine which is being used from within the view/page.
Anyone
JasHi Jason, (great performance at the Transporter, but go easy on the steroids )
There are 2 ways to know that:
1. put your focus (not in the configuration mode) on one of the fields that are on the block. then press F2. Here you get a popup where there is the configuration searched for and the configuration found.
2. Within the configuration, when there is no configuration with the configuration key linked to your business role present, the system takes the <DEFAULT> one. there should at least one be highlighted, otherwise you get a dump NO_CONFIG_FOUND.
When you just press the copy button on the configurations tab, you get your configuration defaulted, this being, the configuration key linked to your business role + the search for component, usage, and subcomponent. here you see what was searched for.
Hopefully this helps you out a bit.
KR,
Micha
Edited by: Micha Van Nijen on Apr 20, 2010 3:03 PM
Edited by: Micha Van Nijen on Apr 20, 2010 3:07 PM -
How to determine which diskgroups a database is using
We want to be able to determine which diskgroups a database is using. We have been using the following query which works but only if the database has open or had open the "right set of files" recently --
SQL> select dg.name from v$asm_diskgroup_stat dg, v$asm_client c where dg.group_number = c.group_number and c.db_name = 'MYDB';
If no archived logs have been generated in a while then the diskgroup that contains the FRA will no be listed in this query. We can cause the FRA diskgroup to show up if we archive the current log. Here is an example.
SQL> select * from v$asm_client;
GROUP_NUMBER INSTANCE_NAME
DB_NAME STATUS
SOFTWARE_VERSION
COMPATIBLE_VERSION
5 +ASM
DBI03 CONNECTED
11.2.0.3.0
11.2.0.0.0
SQL> alter system archive log current;
System altered.
SQL> select * from v$asm_client;
GROUP_NUMBER INSTANCE_NAME
DB_NAME STATUS
SOFTWARE_VERSION
COMPATIBLE_VERSION
5 +ASM
DBI03 CONNECTED
11.2.0.3.0
11.2.0.0.0
GROUP_NUMBER INSTANCE_NAME
DB_NAME STATUS
SOFTWARE_VERSION
COMPATIBLE_VERSION
7 +ASM
DBI03 CONNECTED
11.2.0.3.0
11.2.0.0.0
Notice how diskgroup "7" shows up after the log is archived? It appears that the instance for diskgroup "7" will eventually be drop off after some idle period. Is there a way to generate the list of diskgroups consistently?Hi,
If your database was configured manually (i.e not using DBCA) you should check v$(datafile,controlfile,logfile,block_change_tracking,etc) and parameters of database (log_archive_dest,db_recovery_file_dest,spfile,etc) to map these info.
If your database was configured using DBCA you can try it:
$ srvctl config database -d <database_name> |grep "Disk Groups" -
How to determine which FileChooser ExtensionFilter has been selected
Hi,
I'm using a JavaFX fileChooser.showSaveDialog with two extension filters (*.csv and *.xml). How can I determine which filter was selected when the end-user clicks the save button?
I am writing a program that allows the end-user to create an output file in CSV or XML format.
If the end-user enters a file name with no extension, I need a way to determine if I should create a CSV or XML file. I would also like to add the proper extension to the file name if none is specified by the end-user. I want to do this based on which filter the end-user has selected. I wrote a Java program 5 years ago and I was able to do this with the following instruction:
String extension = jFileChooser.getFileFilter().getDescription();
I can't find a similar instruction for JavFX.
My JavaFX Code:
FileChooser fileChooser = new FileChooser();
fileChooser.setInitialDirectory(new File(options.getOutputDirectory()));
ExtensionFilter filter1 = new FileChooser.ExtensionFilter("Comma Delimited (*.csv)", "*.csv");
fileChooser.getExtensionFilters().add(filter1);
ExtensionFilter filter2 = new FileChooser.ExtensionFilter("XML Document (*.xml)", "*.xml");
fileChooser.getExtensionFilters().add(filter2);
File file = fileChooser.showSaveDialog(stage);
String filename = file.getAbsolutePath();...How do I determine which extension filter has been selected?
My Java Code:
JFileChooser jFileChooser = new JFileChooser();
jFileChooser.setCurrentDirectory(new File(outputDirectory));
jFileChooser.setSelectedFile(new File(backupfile));
FileFilter filter = new FileNameExtensionFilter("Comma Delimited (*.csv)", "csv");
jFileChooser.addChoosableFileFilter(filter);
jFileChooser.setFileFilter(filter);
filter = new FileNameExtensionFilter("XML Document (*.xml)", "xml");
jFileChooser.addChoosableFileFilter(filter);
jFileChooser.setAcceptAllFileFilterUsed(false);
jFileChooser.setDialogTitle("Export Alarms");
jFileChooser.setBackground(colorFileChooser);
int returnVal = jFileChooser.showDialog(jFrame, "Export");
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = jFileChooser.getSelectedFile();
String filename = file.getAbsolutePath();
String extension = jFileChooser.getFileFilter().getDescription();
if (extension.equals("XML Document (*.xml)")) {
if (!filename.endsWith(".xml") && !filename.endsWith(".XML")) {
filename = filename + ".xml";
saveTableXML(filename);
else if (extension.equals("Comma Delimited (*.csv)")) {
if (!filename.endsWith(".csv") && !filename.endsWith(".CSV")) {
filename = filename + ".csv";
saveTableCSV(filename);
}Thanks,
Barry
Edited by: 907965 on May 13, 2012 1:14 PM
Edited by: 907965 on May 13, 2012 1:15 PM
Edited by: 907965 on May 13, 2012 1:19 PMThis problem is currently tracked as http://javafx-jira.kenai.com/browse/RT-18836.
-
How to determine which Windows application has focus
I'm new to JAVA and new to programming. I hope someone will help me out. I'm trying to write a simple JLink program (JLink is a JAVA API for Pro|Engineer, a CAD design program). In part of this program I need to determine if Pro|E has focus. Is there some way to use JAVA to determine which actively running Windows application has focus?
I basically want my program to pause when focus changes to another program. For example: While Pro|E is active and has focus the program runs, when I select an Excel window, or Outlook, or Notepad or any other window my program will pause until focus is returned. I just need to determine which window within Windows has focus.
I hope I have explained this properly. I searched the internet for an answer but found nothing. I did come across some references to JNI, but I'm not sure what that is or how to use it.
Thank you!I just need to determine which window within Windows has focus.No, you don't. All you need to determine is whether your application has the focus. If it doesn't, then some other application does, but it's really irrelevant which one does. All that's relevant is that your application doesn't have the focus and hence it should pause.
-
How to determine which SUS Scenario my company is using?
Hello,
How can I quickly determine which SUS Scenario my company is using? Is this a configuration option in SPRO?
We are using ECC to create PO -> IDOC-XML -> PI -> Proxy -> SUS
SUS creates PO Confirmation, ASN, Invoice response documents to ECC.
Is this classic/ extended classic/ plan driven?
Thanks,
MattMatt,
In IMG check this setting.
Activate Extended Classic Scenario: This setting determines whether Enterprise Buyer processes processes carts with the extended classic scenario
If this setting is not on, the implementation is either classic or standalone.
Check define backend systems used. If the backend system is defined as non-sap systems, the implementation is standalone.
SG -
How to determine which new add-ons were installed?
I am troubleshooting on a system that I use regularly, but I am not the primary user. When I started Firefox today I got an Add-ons window saying that "3 new add-ons have been installed". I'd like to know which 3 are the newly installed add-ons, because I suspect they are things my mother agreed to inadvertently. This system now has 15 Extensions, 1 Theme, and 17 Plugins installed, including the 3 new ones. Is there any way for me to determine which 3 are the new ones? By the way, I'm not entering this question from the system inquestion, so any info of that type that gets appended to this submission should be ignored. The system in question is running Windows XP Home SP3 and Firefox 3.6.10.
Pre-Deployment Planning — Enterprise Administration Guide States "
Installing Acrobat DC Standard¶
Acrobat DC products delivered via an ESD EXE download provide one installer that is used for both Acrobat Standard and Professional. The serial number you use determines which product is installed. What’s important to note is that when you extract the Acrobat ESD EXE (Acrobat_DC_Web_WWMUI.exe or Acrobat_2015_Web_WWMUI.exe), you’ll see AcroPro.msi in the output folder. This is the correct behavior. Simply remember to use AcroPro.msi in any command line scripts.
Note
Existing scripts that use AcroStan.msi should be updated."
Both Acrobat DC Pro and Standard have KEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Adobe Acrobat\2015\Installer ENU_GUID {AC76BA86-1033-FFFF-7760-0E0F06755100}
On the laptop with DC standard installed C:\ProgramData\regid.1986-12.com.adobe\regid.1986-12.com.adobe_V7{}AcrobatESR-12-Win-GM-e n_US.swidtag
On the laptop with DC Pro installed C:\ProgramData\regid.1986-12.com.adobe\ is empty
Your guide does not have any information regarding Acrobat DC. Please explain how to verify if Acrobat DC Pro or standard is installed. or explain how to get the ENU_GUID for standard to start with {AC76BA86-1033-FFFF-BA7E. -
5s How to determine which version of operating system is currently installed
How can I determine which version of the operating system is currently installed in my 5s without having to go to iTunes using my PC?
Tap Settings > General > About.
-
How to determine which ipad I have by model number
How can I determine which ipad model I have by model number or serial number?
Put the serial number here: Decode Mac Serial Number or Lookup Mac Specs By Serial Number, Order, Model & EMC Number, Model ID @ EveryMac.com.
Maybe you are looking for
-
I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was
-
Iphone not showing up in iTunes or macbook
Iphone not showing up on Macbook, PC, or itunes
-
Getting an error like this The import javax.servlet cannot be resolved
HI i am getting an error like this "The import javax.servlet cannot be resolved".wht i ahve done in eclipse right click->open->servlet->packge name->servlet name->next->nexyt>finish.hereinterfaces is javax.servlet.Servlet. do i need add jar for it.ca
-
HT1491 can i purchase games using itunes credit
can i use my itunes credit for game apps on my ipod touch 5th generation
-
InDesign PDF Exports not as small as Quark
Anybody know why inDesign PDFs are double the size of Quark's? I choose the smallest file size setting and the PDFs still come out twice the size of Quark's. Thanks!