How to develop a function module

Hello everyone,
Can anyone pls help me with this..it's quite urgent.Thanks in advance.
How to develop a function module which will obtain the timestamp and give it to a particular transaction or any other transaction where it may be useful to have it. The transcation must have a new parameter to decide whether timestamp should or should not be displayed. The function module must be able to give the timestamp and some other information as follows:
Host timestamp
Local timestamp
Userid
System
SAP client

Hi Aruna,
Could not get you complete question.
But you can try to create a function module which will return you time stamp, userid and other details when you call the function module.
Goto se80, create a function group to it add the function module. In the parameters of the functin module mention the importing parameters you have any (as per your requirement) and in the exporting parameter mention time stamp, userid fields and so on . in the source sode of the function module move the item stamp and other details to the interface of the function module by passing them from the system variables.
Thanks,
George
reward to all helpful tips

Similar Messages

How to develope custom function modules in SAP R/3 system to maintain c...

How to develope custom function modules in SAP R/3 system to maintain cross
referencing tables for sales order number.

Hi Raja,
Steps to crate FM..
Follow these steps..
Go to the T: code SE37
First You Create Function Group
On That u specify
Function Group Name..............
Short Text..............................
save...
Go to SE 37
Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
Short Text.......
Save...
Next Go to Attributes..
Select Radio button : Remote enabled model
Go to Parameters..
Click Import...
Give Parameter Type Associate type S.t
next Click Export...
Give Parameter Type Associate type S.t
Next Click Tables Button..
Specify tables..
Next click source code button..
Write Source code here..
Eg : Select statements Etc..
Finally we should be select the Radio button Enable remorely
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
Hope this information is useful to you..
Reward points if it is usefulll....
Thanks ,
Satya Kumar..

How to down lode function module & how to uploaded

Dear friends,
Iam trying 2 transport request 4m development 2 production ,
unknowing i deleted customized function module,
Same functional module was in other client plz guide me how to downloaded functional module & how to up lode ,
How to down lode function module & how to uploaded
Regards,
Reddy

Hello,
Create a request of type Transport of Copies.
Go to transaction SE03 , select the option Include Objects in a Transport Request, select the object, include in your request and liberate it.
Then copy the DATA and COFILE of this request to your destination system and import it in transaction STMS.
Take a look at this: Transport error!
Regards,

How to keep multiple function modules under one Web service

Hi Experts,
I have Three RFC function modules and i need to create one web service for these three RFC function modules. I know How to crearte a web service for one function module.
please suggest me How to keep multiple function modules under one Web service.
Thanks in advance
Lakshminarayana

Hi Lakshmi,
The best way to do it is to assign all the three RFC Enabled FM's to one function group. Later on the top menu in Utilities you get an option to Create a Webservice from a Function Group.
You can create one single Webservice using all the the 3 FM's.
I hope this helps.
Thanks,
Manu

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

How to use these function modules

Hi all,
can anyone help that how to use these Function modules to update the status of a task, what are all the inputs i required to proceed
1. FC_USER_AUTHORITY_CHECK
<b>2. FC_USER_STATUS_CHECK
3. FC_USER_STATUS_UPDATE</b>
4. FC_USER_GET_CACTI
5. FC_USER_CHECK_FOR_OUTPUT
Thanks in Advance
Ganesh

Hi Rob,
thanks for ur reply,
but they are not clear what they are meant to be, I understood there are some flags needed to run the Function Modules 2 & 3 which are in bold...
but how do i populate them.. i am not getting that..
thanks
ganesh

How to use BAPI_MATERIAL_AVAILABILITY Function Module at batch level?

How to use BAPI_MATERIAL_AVAILABILITY FM to check material available at batch level?
And another question is what's the meaning of 'CHECK_RULE' in this FM. Thanks!

Field name : PRREG
fcheck more details on f1 help...
check_group defines the checking procedure to be used for availability check in individual applications.
along with the checkg group, checking rule specifies the final procedure for chkg..
eg:
ST for stock transport order
AQ for SD order project srock
also chk this help doc.
http://help.sap.com/saphelp_470/helpdata/en/cf/70124adf2d11d1b55e0000e82de178/content.htm
search the forum for sample code..
How to use BAPI_MATERIAL_AVAILABILITY Function Module....

How to use BAPI_MATERIAL_AVAILABILITY Function Module....

Hi Experts,
I want to know actual free available quantity (ATP Qty.) for mass materials,
How to use BAPI_MATERIAL_AVAILABILITY function module ?
I have select all material from MARA and inserted in itab.
LOOP AT ITAB.
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
    PLANT                    =
    MATERIAL                 =
    UNIT                     =
CHECK_RULE               =
STGE_LOC                 =
BATCH                    =
CUSTOMER                 =
DOC_NUMBER               =
ITM_NUMBER               =
WBS_ELEM                 =
STOCK_IND                =
DEC_FOR_ROUNDING         =
DEC_FOR_ROUNDING_X       =
READ_ATP_LOCK            =
READ_ATP_LOCK_X          =
IMPORTING
ENDLEADTME               =
AV_QTY_PLT               =
DIALOGFLAG               =
RETURN                   =
TABLES
    WMDVSX                   =
    WMDVEX                   =
I dont know how to use it.
pl. guide us.
Yusuf

Hi,
       data: iwmdvsx type table of bapiwmdvs with header line,
       iwmdvex type table of bapiwmdve with header line.
parameters: p_matnr type mara-matnr,
            p_werks type marc-werks,
            p_meins type mara-meins.
call function 'BAPI_MATERIAL_AVAILABILITY'
exporting
    plant            = p_werks
    material         = p_matnr
    unit             = p_meins
CHECK_RULE       =
STGE_LOC         =
BATCH            =
CUSTOMER         =
DOC_NUMBER       =
ITM_NUMBER       =
WBS_ELEM         =
STOCK_IND        =
IMPORTING
ENDLEADTME       =
AV_QTY_PLT       =
DIALOGFLAG       =
RETURN           =
tables
    wmdvsx           = iwmdvsx
    wmdvex           = iwmdvex.
check sy-subrc = 0.
Text
ATP information
Functionality
Using this function module, you can determine the receipt quantity still available for a particular material in a certain plant according to ATP logic (MRPII).
The availability check is carried out on transferring the material number, the plant and the input table (WMDVSX). The scope of the check, that is, which stocks, receipts and issues are to be included in the check is defined by the combination of checking group (material master) and cheking rule. In the function module, the system uses the checking rule defined in Sales & Distribution (A). You can overrule this checking rule by using an interface or a user-exit (exit_saplw61v_001). A similar procedure is also valid for the plant parameters. The customer number in the user-exit means that the plant selection can be controlled via the customer. If no plant parameters are given via the interface, the system uses the parameter 'WRK' saved in the user's fixed values.
The results of the availability check are recorded in the output table (WMDVEX). This table contains dates and available receipt quantities (ATP quantities). The results of the check depends on the following entries:
If no date and no quantity is transferred, the system displays the ATP situation from today's date into the future as the result.
If only a date and no quantity is transferred, the system displays the ATP situation from the corresponding date as the result.
If both a date and a quantity are transferred, the system calculates the availability situation for the quantity specified.
In the last two cases, the parameter 'DIALOGFLAG' is supplied. This can result in the following:
' ' (blank)   <=> quantity completely available
'X'           <=> only partial quantity available or not available at
                  all
'N'           <=> Material not included in the availability check
                  (Material not relevant to the availability check)
The system also displays the end of the replenishment lead time (ENDLEADTME).
regards

How to use SO_OBJECT_SEND function module

Hi friends,
how to use SO_OBJECT_SEND function module in 4.0B Server .

hi
good
check this code
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
reward point if hlepful.
thanks
mrutyun^

How to use ADD_MAINTAIN_COMPLETE function module

how to use ADD_MAINTAIN_COMPLETE function module
please help me.
by using the above function module
how can i change the ADRT table REMARK field

how to use ADD_MAINTAIN_COMPLETE function module
please help me.
by using the above function module
how can i change the ADRT table REMARK field

How to use the function module 'HR_ES_FEATURE_BACKFIELD'

Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.

hey iam from functional side can u be little bit clear of that feature
thanks
sikindar

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

How to DEBUG a function module running in background mode? Please help!

Hi Experts,
   I am calling a function module in my ABAP code in background module using the following syntax:
CALL FUNCTION 'YBBC2_CREATE_SNAPSHOT' IN BACKGROUND TASK
          TABLES
            itab_std_format_inv = itab_std_format_inv
            itab_snapshot_inv = itab_snapshot_inv.
        COMMIT WORK.
If I put the breakpoint in the CALL FUNCTION line and execute the program, the debugger does not take me to the valled function module. This may be because I am running the function module as background task.
I cannot comment this "IN BACKGROUND TASK" statement as well since i am debugging in Quality system where I don't have change access.
So how to DEBUG a function module running in background mode? Please help!
Thanks
Gopal

Hi,
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
    lx_exit_loop(1)     TYPE c.
lx_exit_loop = ' '.
DO.
    IF ( lx_exit_loop = 'X' ).
      EXIT.
    ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
<b>Reward points</b>
Regards

How to check if function module exist

Hi All!
Does anyone know how to check if function module, which name is provided by the user, exists?
I have to execute a function but when user provides a incrrect name - i receive a short dump. I would like to chceck if this function exists before execution and if not - warn user with message box.
Thanks
Tomek

REPORT z_tmtest MESSAGE-ID zz.
PARAMETER: a_fname LIKE tfdir-funcname.
PERFORM test_fun_exist USING a_fname.
      FORM test_fun_exist                                           *
Test FM Exists
FORM test_fun_exist USING f_funcname LIKE tfdir-funcname.
CALL FUNCTION 'OM_FUNC_MODULE_EXIST'
       EXPORTING
            function_module = f_funcname
       EXCEPTIONS
            not_existent    = 1
            OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE e001.
ENDIF.
ENDFORM.

How to run ABAP Function Module in Background Wchich Takes Long Time to Run

How to run ABAP Function Module in Background FOR LONG TIME
I am not that experienced with ABAP. I am on SAP BI 7.0. I WANT TO RUN A FUNCTION MODULE
RSDRT_INFOCUBE_DATA_COPY.
I used SE37 and then executed the module, I supplied the parameters on the form which opped-up and then program started running. . Program was however interrupted after 10 minutes by ABAP. How can I run it in background without interruption?
THANKS A LOT.

Hi,
You can call this FM in a program and run that program in background.
Regards,
Raju

How to develop a function module

Similar Messages

Maybe you are looking for