How to develop a webpage that allows user to customize a Mr. potatohead

Hello Gurus,
I'd like to develop a webpage that takes a shell of Mr. Potatohead and allows the user  to change colors, add/remove face/body parts, add accessories, add clothes, etc.  Something like the following sites.
http://www.customink.com/lab/?#shared
This site offers several options like adding text and graphics.  All very cool.
http://www.picassohead.com/create.html
This site offers similar options to the site above, but seems to offer more tools/options.
The user interface seems simple, but I have absolutely no idea as to where I should start on this project.  Is Dreamweaver the right tool for this sort of webpage?  I am a complete amateur who knows that Dreamweaver can be used to make websites, but I have no idea how to do any more than adding links, pics, and text to a webpage.
I would appreciate any help to get me started on this project. Thanks.

Why is flash dying out?
Many of us never liked flash in the first place. It is bloated and has never served much of a practical purpose. Adobe is not going to support flash for mobile devices, which is an increasingly large market segment. If Flash disappeared, life on the internet would hardly notice. Flash has had a position in delivering video on the web, but there are other ways, including HTML5.
You might want to explore jQuery, which is a javascript framework. It can often provide complete javascript code for various pruposes.

Similar Messages

  • What is the minimum permission level that allows users to view draft documents, other peoples' draft documents?

    What is the minimum permission level that allows users to view draft documents, other peoples' draft documents?
    Normally a person creates a draft document and when they are ready they publish it and the Approver approves it. However, what if a power user needs to be able to see all draft documents. Not just their own but other peoples'. What is the minimum permission
    level that allows then to do this?
    Cheers,
    Mark
    Learning SharePoint

    Hi Mark,
    Per my knowledge, there is no minimum permission level that allow users to view their own and other people’s draft documents.
    This is based on the Draft Item Security setting you choose for your list in Versioning Settings:
    You can follow the detailed steps in the link provided by Avni.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How can I create a link that allows users to convert a Wiki pages into PDF format.

    I am working on an enterprise Wiki library site collection, but I want to create a link named “Convert to PDF” , which allow users to convert the current Wiki into a pdf file. I need this link to be displayed some where in all the exsiting Wikis pages, and
    on any new wiki page. Can anyone advice if there is already such as capability within sharePoint 2013.
    Thanks

    Hi,
    For your requirement, we can add this link to the master page, then it will appear in the pages which apply this master page.
    To convert the current page to PDF, you can take consideration of using jsPDF.
    The links below with demos for your reference:
    http://parall.ax/products/jspdf
    Best regards
    Patrick Liang
    TechNet Community Support

  • Flash app that allows users to create mini animations

    Hi,
    I am fairly new to flash, and was wondering if the community could point me in the right direction for my current project.
    I am looking to build an app that allows end users to draw and save mini animations (simple predetermined shapes that move in 2D).  So far I have a written a app that allows the user to draw a single frame using simple shapes and lines, but I am having some small troubles at this stage, and have not attempted to allow the user to animate or save the drawing.
    If anyone knows of a tutorial or some other resource to put me on the right path I would be very grateful.  I can also share what I have if anyone would be willing to give me some pointers (I am going to assume that as a newbie, my code could use a lot of improvement).
    Regards,
    Robbie Vos

    Hi Andei1,
    Thanks for the input.  I figured that the save functionality would be a little difficult. 
    However, if I can get the basic app going (allowing users to create mini animations) I think I should be able to get save going with some (ok, alot) of effort.
    Regards,
    Robbie Vos

  • How can I allow user to customize the functionality of program at runtime? (not using runtime code compilation)

    Using .NET Framework 4.0 what features are available that would allow to accomplish something very modular and user customizable, like depicted in this XML.  Where I define specific base operations like Get() and Put() methods that operate on strings. 
    And allow the user to add and remove those or mix and match them in a way that they basically design their own run time functionality that suits them.  So they just create their own 'Operation' and fill it with the operations they want to perform on some
    incoming data type, in this case it is a string - with substring and insert methods. 
    EDIT - Assuming end user is non programmer and Dynamic Code compilation is not an option.  I have an idea maybe using dynamic keyword, but not sure if it makes what i suggest possible.
    <Operation Name="GetValues">
      <Get id=123"  FromIndex="2" ToIndex="23"/>
      <Get id="234"  FromIndex="3" ToIndex="5"/>
       <Output Path="C:\" Filename="testOut.txt" Append="true">
         <Format>
              <Result id="123"/> , <Result id="234"/>
         </Format>
       </Output>
    </Operation>
    <Operation Name="InsertValue">
      <Put AtIndex="5">stringtoinsert</Put>
      <Put AtIndex="36">anotherstringtoinsert</Put>
    </Operation>

    Hi sjs1978,
    I am not familiar with dynamic code, and I made a research about it.
    >> I'm aware of dynamic code compilation, but that requires user to input pieces of code.
    Did you try to store the pieces of code into a file and call the code when the dynamic code compilation requires user to input code?
    In addition, I found links about using code provider to compile a source file, and the links below might be useful to you.
    # Dynamic Source Code Generation and Compilation
    https://msdn.microsoft.com/en-us/library/650ax5cx(v=vs.110).aspx
    # CSharpCodeProvider Class
    https://msdn.microsoft.com/en-us/library/microsoft.csharp.csharpcodeprovider(v=vs.110).aspx
    # Is it possible to dynamically compile and execute C# code fragments?
    http://stackoverflow.com/questions/826398/is-it-possible-to-dynamically-compile-and-execute-c-sharp-code-fragments
    Best Regards,
    Tony
    Help each other

  • Can you create a button that allows users to save content?

    I am trying to come up with a way that allows a user to save their certificate (created using the widget in Captivate 4) if they don't immediately have access to a printer. Is there some code I could attach to a button?

    What about printing to a pdf-document? There are a lot of free PDF-writers around.
    Lilybiri

  • How to pass the value that the user clicks on

    I have a bunch of files that i am displaying. If the user clicks on a file I am taking to another page. I want to capture
    the value that the user clicks on as that's the file name.
    I am displaying the list of files in a loop and have a href to the next page.
    the setAttributes and getAttributes do not work as they capture only the last value in the loop.
    Any suggestions what I should use?

    The standard approach is to send a request parameter with the click.
    You are showing the filenames as hyperlinks?
    Then you just have to make the link
    <a href="fileDetails.jsp?fileId=<%= currentFile.getFileId() %>">currentFile.getFileName()</a>You can then use request.getParameter("fileId") to find which link was clicked.
    Cheers,
    evnafets

  • How to reset the feature that allows audio and video tracks to snap to other tracks on timeline

    I have somehow disabled the feature that allows you to drag and snap video and audio tracks on the timeline to other tracks or positions of import.  It is only one project that has been affected, and all I can think of is that while performing some other keyboard shortcut, I accidentally perfromed a shortcut that diabled this feature. 

    You mean, "Snap?" Press 'S' on the keyboard, or press the magnet button in the Timeline panel.

  • Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive.  How do I do this?  I created image

    I am trying to emulate a piece of equipment.  I need the user to be able to click on specific buttons that will take the user to another screen(s).  After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed.  I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button.  How can I get that 3rd state to stay after user returns to the main screen? 

    Hi Elizabeth,
    Since I just did this morning what you are currently attempting to do, I thought I'd share my method.  I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out.  However, I am happy to share here anything I have learned thus far.
    First, here is what my initial slide looks like (see interaction slide below).  I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide.  Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance). 
    The initial slide (interaction slide):
    Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below):  Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed.  The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
    Content Slide 1:
    Remember, there may be an easier way to do this in Captivate.  I am using Cp6 for this module.
    1. I created two user variables as follows
    Name: v_batteryExplore
    Value: 0
    Name: v_fuelExplore
    Value: 0
    2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
    Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
    I have also noticed that it matters where the buttons are located on the timeline.  It seems best to have buttons above all other content.  Not sure why, but I have had images not appear when I have not done this.
    And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
    As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible.  Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name.  In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden.  Here is a final screenshot of my timeline for this interaction.  I hope this information helps you!

  • Pass protected script that allows user to change content

    I work with a number of local bands but with my schedule
    getting busier, I can't take time to make weekly updates to a bands
    gigs or schedules. I saw a script a few years ago, which allowed an
    end user (the band) to modify their own webpage (in particular, the
    schedule page). It was password protected so you could only access
    the page configuration with proper authorization. I have since
    forgotten about the code and can't seem to find one similar to it.
    The unfortunate side effect was the page was very simplistic and
    did not allow much markup.
    Does anyone know of a code or script like this one?
    Thx in advance.

    Lazy solution:
    Just show them the HTML page, have them make the changes and
    set them up
    with an FTP client to just upload the file to the right
    location... (and
    be sure to show them how to make a backup copy of the
    original... so
    they can't really mess things up)
    that way you wouldn't have to change a thing...
    there are plenty of possibilities out there... using some
    sort of
    scripting language up to XML... the question is more how
    involved do
    you want to get (in creating the set up)...
    Anurag
    txwebman wrote:
    > I work with a number of local bands but with my schedule
    getting busier, I
    > can't take time to make weekly updates to a bands gigs
    or schedules. I saw a
    > script a few years ago, which allowed an end user (the
    band) to modify their
    > own webpage (in particular, the schedule page). It was
    password protected so
    > you could only access the page configuration with proper
    authorization. I have
    > since forgotten about the code and can't seem to find
    one similar to it. The
    > unfortunate side effect was the page was very simplistic
    and did not allow much
    > markup.
    >
    > Does anyone know of a code or script like this one?
    >
    > Thx in advance.
    >

  • Is it possible to create a form that allows users to import data from an excel spreadsheet

    I have not been able to start my reading on scripting or other livecycle features to be able to try to figure this out but I was wondering if anyone else had ever created a form with this feature or had any ideas of how it would be possible.  Our company currently uses and excel form that would have a variable number of rows of data for each time it is filled out and we would be replacing it with an adobe form.  I would like to know if the users, who will be using the new adobe form in adobe reader, could have the capability to imort the lines from the previous excel form into the new adobe version.

    Hi,
    You can set up a data connection with an Excel spreadsheet. However for the data connection to work for users with Reader, you would need to Reader Enable the form with the LiveCycle Reader Extensions ES2.5 (server component). See here for summary: http://assure.ly/etkFNU.
    However if you are just trying to get the existing data into the form, you should have a look at some of Stefan Cameron's posts: http://forms.stefcameron.com/ (try a search). You can start a new form using the wizzard and select import from Excel. This will allow you to paste from your spreadsheet to a new form. This should help set up the data structure/schema, which you can then replicate in a new form. I haven't done this before, but it should be possible.
    Hope that helps,
    Niall

  • How to capture the data that the user modified in SM30(Maintenance view)

    Hello experts,
    I have a new requirement wherein when the user modifies a particular record in SM30(maintenance view)
    it would also update that certain records in another table. For example, I modified the address
    of record 1 in table1 so I need to automatically update that same record in table2. Help would be greatly appreciated.
    Again, thank you guys and have a nice day!

    Hi again,
    1. But how can I capture the data that was modified
    Yes, u are right.
    We will have to use the event,
    'BEFORE SAVING'.
    2. In that,
      u must fire a select query,
       from the same table,
       for the same record.
    3. In this, u will get the OLD DATA (which was already saved),
    4. Using this,u can compare,
       (either thru LOOP, or field by field)
      to know, which field value has been changed.
    regards,
    amit m.

  • How to save the data that a user has written in a table (front panel) by using a "press button"?

    Hi,
    I have the following situation. I need to be able to save the data I write in a table (front panel) when desired.
    This allows me to modify, add new data, etc in the "Table" when wanted and to SAVE the latest information when wanted.
    I need to save all the table data by using ONLY one button.
    Thanks for the help!
    Kind regards,
    Amaloa S.

    Hi,
    Thanks for the feedback. :-)
    Your answered helped.
    In this case I need to save the Data into an ARRAY.
    Now I have the following issue. I will try to explain:
    Suppose that I have following:
    1. Several GROUPS of Data like this:
        ER-1234
        ER-3245
        ER-4786
        ER-9080
    2. Each GROUP has the following ELEMENTS:
        A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
       So it would be like
        ER-1234: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
        ER-3245: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
        ER-4786: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
        ER-9080: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
     3. An each ELEMENT has DATA that I need to save, BUT! that I need to be able to get by specifying the group and the element.
        A:
             2,3   2,4    2, 8,   2,8 
             2,2   2,3    2, 7,   2,6
             2,1   2,6    2, 6,   2,7 
             2,5   2,4    2, 5,   2,3
    How can I save the ELEMENT "A" Data with the label of the GROUP and the ELEMENT so that I can recongnize it when I need to get the DATA again?
    Thanks for the help!
    Best regards,
    Amaloa.

  • Is anyone aware of a framework that allows users to build JSF plug ins

    We have a businsess application where we would like customers (and ourselves) to add in feature plug ins.
    We know that one option is to use portlet technology for this but was wondering if anyone was aware of any open source or examples of doing this that does not use portlets.
    Ideally we would love to allow people to write a separate JSF application that works like a Struts plug in (but for JSF). In other words the user would write the JSF applciation, put in in a jar file and provide some kind of mapping file.
    Our application would have predefined hooks where the new applications would be shown (like a menu of these options for example) or file type application mapping..
    I have done some net searches on this but thought I would see if anyone in the community was aware of such a framework.

    We have a process to go from Desire2Learn to iTunesU. You should be able to do the same sort of thing with blackboard.
    What we did, is we setup a javascript post request coming out of Desire2Learn. This post request contains the course name, username and a few other important bits of information. This request goes to one of our servers which processes the passed information, and generates the necessary itunes tokens and then startes the itunes u authentication process.
    There is no reason why you couldn't do something similiar in blackboard. Either way, you are going to need a "middleman" server to intercept the request out of Blackboard, and then process it and iniatiate the iTunes U authentication process.

  • How to disable airport so that standard users can't reenable it ?

    Even when I disable airport interface from the command line :
    sudo ifconfig en1 down (what requires sudo privileges)
    a standard user can reenable it ! Strange behaviour compared to linux or windows OS.
    If someone knows how to block airport, please let me know.
    Thanks

    Hello,
    Thank you for the answers.
    All users are standard users.
    The option I was searching for is in System Preferences - Network - AirPort - Advanced - Require admin password for : Disabling or enabling AirPort. The other two options could be useful too.
    I think I'll add this to my base image. In the meantime I'll try to apply the settings via Apple Remote
    I didn't find the exact settings to enable the 3 options from the command line, if you know how to do this please tell me.
    I found a few very useful commands though :
    Disable/Enable airport from the command line
    networksetup -setairportpower en1 off/on
    That's the command I will use when all machines will be configured with "Require admin password for : Disabling or enabling AirPort". If it's not configured the user can reenable airport.
    Disable/Enable airport service from the command line :
    networksetup -setnetworkserviceenabled AirPort off/on
    That's the command that can help when you haven't block the users yet. A standard user can reenable the service but he needs to know the command as well as how to use terminal.
    p.a

Maybe you are looking for