How to develop using two NWDI

We are going to start a development activity on a NWDI (Scenario 2+/3) il location A, so we will define here the SC, products and so on into that SLD, and we will create DC here using NWDS.
In order to be able to develop also when the NWDI A is down or not reachable (only in this case) we want to be able to develop also on a second NWDI in location B. But the "master" JDI will be that in location A.
Both the NWDI have the same patch level and the two networks are connected.
We read the thread :
Problem Importing Workspace to another Distributed DTR (Problem Importing Workspace to another Distributed DTR)
We have some question on this scenario:
1) the two NWDI has different SLD settings, and so different prefixes and namespaces.
If we export the SC definition from the SLD in location A, also the prefixes reserved will be exported ?
Our worry is to create on location B a DC with the same name, but as the prefixes are different it will be see as different object to the NWDI in location A when we try to move it there and the merge will fail.
2) Which is the way to integrate the changes made in B into the location A ?
We have to export SCA file and then to check-in them into the same track used for the same SC on the target CMS and then solve the conflicts using the Integation view?
Are there a way to align the two DTR in auomatic way ?
3) What about the CMS tracks and CMS domain ? They are different on these NWDI. Which is the impact on the SCA files we will move manually?
It's necssary to align the CMS configuration between the wo NWDI ?
Regards

Hi we cannot use HA.
Location A is on at the customer site, location B is in my office. There is network connection but it's just for the project.
Sometimes happen the network is down or the location A is down.
THen we want to develop in location B and then move the developments to location A when it comes available again.
THe root of my question is:
how I can develop on my offices, in location B, the same "objects" object of mine as we have on location A ?
Do I have to set on my SLD in location B the same object server, name server and the same prefixes ('By Convention, 'Design Time Packages' and 'Development Component name') as they are on the SLD in location A ?
My worry is that due these settings the object I'm going to develop on Location B will be see as completely different objects after the import on location A, also if they have the same name.
regards

Similar Messages

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

How do I use two different apple IDs on one itunes?

How do I use two different apple IDs on one itunes?

This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

How can we use two BOM

Dear all,
my scenario is in this way way-
how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

Dear
1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house where as Alt2 with routing having PP03 as control key for external operation -PV2 )
2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
REFER : Subcontracting & BOM alternative
Hope this will solve your issue
Regards
JH
Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

How do automate using two output types in an invoice based on plant

Hello,
Can you tell me how to configure automatically two output types for the same invoice.
My client has business in USA and Europe.We are using only one sales organization. But we need to print invoices in letter size and A4 size depending on whether the invoice is created in europe or in USA. So , I have created two output types, one for letter size and one for A4 size. How do I configure so that if it is based in a plant/shipping point in Europe it is printed using the A4 output type else in letter size. Please suggest.
SAPSDUSER

I do not think you can use plant/shipping point in your access sequence for invoice output on header level, unless you add these fields to header level kommunication structure and populate these fields in userexit.
You can either
1. define requirement routines for your 2 output types which are mutually exclusive (if plant = A routine 1 returns sy-subrc = 0, routine 2 returns sy-subrc <>0, if plant = B routine 1 returns sy-subrc <>0, routine 2 returns sy-subrc = 0). You can assign requirements to output type either in output determination procedure OR in the access sequence. I would do it in output determination procedure. Check transactions NACO or NACE.
OR
2. add your fields to komkbv3 communication structure, populate your fields in thsi structure in userexits which are called from the function module komkbv3_fill and then you can either use then in the access sequence for your output types or create routines as in case 1. but the logic will be a simple check statement since KOMKBV3 is available in these routines.
3. In fact you can use one output type and select your layout in the print program itself... which may be even easier for you. We use this approach to select proper layout for GEOs which may have several layouts depending on region for example... so the output type is defined per country, then layout is selected by print program. (tnapr-fonam = ..., nast-spras = proper language, set country '' to use proper decimal & date format...)
Message was edited by:
Siarhei Mahulenka

How best to use TWO Time Capsules, Airport Express and Apple TV?

Hello
I have the following Apple equipment and am wondering how best to plug it all together. At the moment I am not using some items at all because I do not know how to best use!
1. MacBook Pro (2012 model) 'Mac1'
2. MacBook Pro (2009 model) 'Mac2'
3. MacBook Air (2011 model) 'Mac3'
4. Time Capsule 1TB (model A1355) 'TC1'
5. (another!) Time Capsule 1TB (model A1355) 'TC2'
6. Airport Express (2008 model)
7. Apple TV (2013 model)
8. LaCie 1TB USB Hard Drive
9. Apple iPhone
10. Sonos system
CURRENTLY
TC1 is plugged into the Virgin Media modem to provide a WiFi network called 'Amer's Apple Network' around the house. The Virgin Media wifi has been switched off to reduce interference.
TC2 is not being used. The Airport Express is plugged in upstairs (or sometimes near garden) to extend the 'Amer's Apple Network' and this seems to work fine.
Apple TV is plugged into main TV and is plugged into 'Amer's Apple Network' directly using Ethernet to TC1 but often runs slowly and does not work if Mac1 is not awake (or iTunes is not running on Mac1).
LaCie is plugged directly into TC1 and currently has a old copy of my iTunes library stored on it which my Sonos system access. However, there seems to be a problem in that iTunes randomly uses that LaCie library and/or local Mac library. Often we get a pop up message on Mac1 saying "Library cannot be found" and we have to manually navigate to the LaCie drive (via the TC1 folder) to open iTunes. Also connecting iPhone to Mac1 seems to work very slowly as it appears to be trying to back up to LaCie drive.
QUESTION
What would be the best, most efficient way of using all (or if some is redundant equipement then which), to set up the following:
1. A shared home network which enables all three computers (and any future Macs and/or iPads etc) to access one master shared iTunes library, which is the one that is updated with any new music, films etc added via any of those machines
2. A shared home network that enables a shared files folder but also allows each user to keep their own personal hard drive (eg locally on whichever machine they are using).
3. A fast (as possible) iTunes back up process when connecting iPhone to computer
4. Usage of both TC1 and TC2 (and Airport Express) to extend network around the house (several weak spots exist) and also to maximise storage using the 1TB of each TC1 and TC2.
5. Would it then also be possible to attach the LaCie USB drive for an additional 1TB storage? If so how and would it be very slow? From existing usage it appears to be very slow when used as a regular access drive, so perhaps better as a 'slow' drive that is just occassionaly used for back up and nothing else
Main question is (to the networking experts!), how would you personally set up all above to give best wifi coverage, fastest back ups, access to Sonos for iTune library, access to Apple TV, and shared folders etc etc. I basically seem to have lots of kit (albeit some quite old) and nothing seems to be working together particularly well.
Happy also to ditch any bottlenecks in the above equipment list (eg LaCie USB drive?) and add something which would better bring together the other components?
Any thoughts much appreciated!
Best
Amer

So ... FINALLY ... I found some time to implement this!
Steps taken and results:
1. Moved my entire music library to Mac1. Used the opportunity to also share my other Mac2 onto HomeShare and copy across any music files from Mac2 onto Mac1 that were not already there.
Result: Mac1 now holds my whole music library locally. Works incredibly fast whenever playing a track, adding a new track or updating info on existing track. Good!
2. LaPastenague's instructions for bridging TC1 with TC2 worked a dream. Only thing is they are basically next to each other as I don't have the energy (or cabling expertise) to install (cleanly) long runs of ethernet cable.
Result: Got a clear Wifi signal, not sure if any faster than before but I assume two TCs next to each other both sending out the same network signal can't be any worse than one. Main thing is that I have an extra 1Tb network drive (i.e. TC2) connected to TC1 which I can access from all my Macs now.
3. Copied the entire Mac1 Music library over to TC2 drive into the Data folder. This happened relatively quickly (I think!) ... but would welcome any comments on whether slower than expected, to highlight if I might be able to improve the connection. 12,000 songs in 2 hours, with Mac1 sending the files to TC2 wirelessly. I know I could probably have connected Mac1 to TC2 by ethernet cable to speed up, but I had run out of Ethernet cables by now!
Result: All my music (as of today anyway) now on Mac1 AND on TC2 in normal readable format (i.e. by Sonos and as a simple back-up that can just be carried around and copied anywhere in the event of loss of Mac1 drive
4. Set up TC2 Music Library in Data folder to be the networked music folder for Sonos using "\\TC2\Data" (ps. why doesn't Sonos allow a simple click and select option for choosing drive and instead force us to go back to the 80s and type in drive path which isn't always clear, especially on a Mac!)
Result: Sonos can access all my music (as of today anyway) on TC2 and no need for Mac1 or any other Mac to be open.
BUT: As you may have guessed, the issue with the above set up is that as soon as I buy a new song, it will get added to my Mac1 quickly and smoothly ... but the area where I really use my music (i.e. Sonos via TC2) will have the older music library.
QUESTION: Is there any way in which I can adjust the above set up, so that whenever I add new music to my Mac1 it also copies across to TC2? Don't mind if this is done slowly and later (eg in middle of night) but of course don't want to have to copy across manually each time. Would prefer it to just update newly added tracks regularly.

My partner and I each have an iTouch and one iMac. Our iTunes only recognizes my iTouch - how do we use two iTouches on one iMac?

My partner and I each have an iTouch and one iMac. iTunes only recognizes my iTouch. How can we use one iTunes with two iTouches.
thanks

iTunes can manage any number of iDevices separately. Be sure each has a different name. You can only connect one at a time. Please get the IPod Touch user guide.

How can I use two different Yahoo mail accounts ion Firefox?

I have two Yahoo mail IDs. How can I use them both simultaneously on Firefox? Right now I am running Firefox and Internet Explorer so I can have the two accounts open at the same time. I would prefer to have both accounts running on Firefox, but I can't figure out how to do it.

Multifox is an extension that allows Firefox to connect to websites using different user names. Simultaneously! <br />
http://br.mozdev.org/multifox/

How can I use two single-dimensional arrays-one for the titles and array

I want to Use two single-dimensional arrays-one for the titles and one for the ID
Could everyone help me how can i write the code for it?
Flower
public class Video
public static void main(String[] args) throws Exception
int[][] ID =
{ {145,147,148},
{146,149, 150} };
String[][] Titles=
{ {"Barney","True Grit","The night before Christmas"},
{"Lalla", "Jacke Chan", "Metal"} };
int x, y;
int r, c;
System.out.println("List before Sort");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);
System.out.println("\nAfter Sort:");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);

This is one of the most bizarre questions I have seen here:
public class Video
public static void main(String[] args) throws Exception
int[] ID = {145,147,148, 146,149, 150};
String[] Titles= {"Barney","True Grit","The night before Christmas", "Lalla", "Jacke Chan", "Metal"};
System.out.println("List before Sort");
for(int i = 0; i < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles);
System.out.println("\nAfter Sort:");
for(int i = 0; c < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles[i]);
Generally you don't use prefix (++c) operators in you for loop. Use postfix (c++).
Prefix means that it will increment the variable before the loop body is executed. Postfix will cause it to increment after.

How can I use two screens to display one window

Before Mavericks, MAC OS allowed you to use two screens (next to each other) in order to display one (big) window of one application.
That would mean that a window would start on your left screen en would continue on the right screen.
With Mavericks, however, this not possible any more. The window of the application can only be seen on ONE of the screens (i.e. the left one).
Can any one tell me whether I've missed certain options or how to adjust my settings in order to get this feature back?

Hey CGNL,
First, if you haven't already, set up the displays as an extended desktop:
Choose Apple menu > System Preferences, click Displays, then click Arrangement.
Follow the onscreen instructions.
Then, use Mission Control preferences to uncheck/turn off the option for "Displays have separate Spaces":
Choose Apple menu > System Preferences, click Mission Control
Uncheck "Displays have separate Spaces"
That should enable you to stretch whatever window you want across multiple displays.
via: OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
and
OS X Mavericks: Mission Control preferences
http://support.apple.com/kb/PH13925
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

How do I use two DAQ cards in one Labview code? Current I'm getting error " error 200558 occurred at DAQmx Create Channel.vi. One task cann't contain multiple independent devices". Can someone help me?

The two DAQ cards are NI PCI-6070E & NI PCI-6052E. The Labview I'm using is labview 7 Express and the Window system is Window XP. I'm using NI SCXI-1000 chasis and SCXI-1102 & 1102B two modules plus a feedthrough SCXI-1180. 1102 is connected through SCXI-1349 cable to DAQ card 6052E while 1102B is connected through SCXI-1349 cable to DAQ card 6070E. SCXI-1180 is connected to 6070E through SCXI-1349 adaptor on the back of 1102B.

Sarah, thank you for replying my question. It seems that I'm making progress everyday (smile). I'm able to run the test using both daq cards in my code now. But as I'm moving forward, I'm getting new questions too. How do I use one STOP button to control both tasks and how can I save data into one single file?
I attached my code here hoping you can get the specifics on my application by looking at the code. Thanks very much!
Thanks.
Attachments:
DAQmx_Task_Example_plus_voltage_2.vi ‏416 KB

How can I use two ports in the same time?

My application need one pc use two ports the same time.But when I open one port and my systerm is running the other port can't be opened.
I use the frame API in VC++6.0.
My OS is win2000 server;
The functions I used are ncOpenObject();

Hi DickW
Thank you for your help!
I have tried the example.But the example shows how to connect one CAN network with two ports.
I want each port connect to the net can both read and write;
I want to apply the function like this:
1.config the port1 and port2
2,open port1 and port2
But after I open port1 or port2 the other port can't be opened;
After I open the second port it always returns negative.
In the codes I use CAN0 and CAN1 as the CAN objects.
Attachments:
twoport.zip ‏1184 KB

How can I use two database in an application?

When I use two database like CloudscapeDB and TestDB in J2EE1.3.1, I always get some exceptions, which is unknow source about one of them.I am doing a CMP entity bean application. Can someone tell how to set up the environment and what is problem about the exceptions I met?
Thanks.

Hi,
The basics for using the two databases is simple.
For database configuration you have to provide the driver class name, url, schema name and password during the creation of the connection pools. So u can create a as many no. of connection pools as the no. of the databases.
Hope it will work..

How to develop using two NWDI

Similar Messages

Maybe you are looking for